- Thread starter
- #101
@pb4ugo thanks for the response. I don't know about the box or center arm being rebuilt per the fsm. I watched the video by OTRAMM to rebuild the center arm. Seemed very straight forward and simple. I did a rebuild of one of these on my previous 40 15 or so years ago. The steering box, I purchased rebuilt by a member here on mud.
My pre-load on the bearings were both within spec except the one on the passenger side was just under 6 lbs and I think 6.6 lbs is supposed to be the minimum.
My pre-load on the bearings were both within spec except the one on the passenger side was just under 6 lbs and I think 6.6 lbs is supposed to be the minimum.
Last edited: