I recently bought a new starter motor and wired it identically the way the original one was wired, as pictured below. However, it does not engage the fly wheel but instead just creates a faint "click" sound somewhere under the hood. There are two pieces of the new solenoid that I'm unsure of what their uses are. Hoping you guys can help.
PS. Grounds are good, wires replaced for good measure, tried it with 2 different ignition switches. Starter does work when jumped between terminals with a screwdriver. Leaves me to think I have the aftermarket solenoid wired incorrectly.
PS. Grounds are good, wires replaced for good measure, tried it with 2 different ignition switches. Starter does work when jumped between terminals with a screwdriver. Leaves me to think I have the aftermarket solenoid wired incorrectly.