Would you POR-15 these new springs for the scrapes?

[Ride Fly]

I received the Terrain Tamer kit and the springs have bits of exposed metal where the paint was rubbed off (I'm assuming during shipping). I've been considering applying POR even before this, but wanted to get other's opinions. (I can only attach 5 pics but there are about 5 or 6 more areas with similar mars and exposed surface). TIA

 

[Aloha Jen]

POR15 is mostly for rusted/rusty metal and requires specific prep to adhere properly. Might be better to just paint with rattle can or brush to cover exposed metal. Just my opinion.

 

[brian]

That has "don't even worry about it" written all over it.

 

[Paul_A]

Touch up with a brush and some Rustoleum.

 

[B y r o n]

Easiest fix.

 

[peesalot]

liberal application of fluid film will soak into those bare spots and keep from rust bubbling. You are going to fluid film the undercarriage anyway.

 

[anothernz45]

Rattle can if you're worried then fluid film, fishoil, lanolin but I would concentrate on where the springs clamp to the axle and that bracket, thats where rust establishes. I can't recommend Por15 and I've used gallons. Save your money