When to Rebuild Steering Box?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 23, 2019
Threads
121
Messages
726
Location
WNY For Now
My 95 FZJ80 is your classic "ran when parked" sort of rig when I bought it and it has just undef 200k miles on it. As such I've never driven it. I currently have it apart for an engine swap and the PS Gear Box is currently off and sitting on a shelf.

At what approx mileage do things typically need to be rebuilt? Is it a good "do it while it's out" item or a "I wouldn't look at it until 400k miles" kind of thing?

Cheers.
 
When it starts leaking or there is a lot of slop in it. Or if you just want to.

I do a lot of things to my Cruiser because I like to “reset it to zero”. 25yrs and hundreds of thousands of miles. Maybe the thing I rebuild or replace isn’t worn out but I like it new or refreshed.

Cheers
 
I resealed mine when I resealed the PS pump and changed all the hoses. Got the system drained and the hoses off, might as well refresh the whole system.
 
When you decide it needs adjustment. People try to make adjustments to fix a problem, when in reality the adjustments they are making should be done on a fresh box, and can do damage if used to try to correct an internal issue. Other than that, if you have an opportunity to rebuild a 200k box, I'm sure it could use the love.
 
I had a ps pump start to whine that burping it wouldn’t fit. Replaced every piece of the system and used Red Head Gears for the rebuild.

8AC88B74-5A95-4335-AB1F-38248D5DCD5B.webp
E86C499D-15F4-4D0E-A9B8-28A5E10A6760.webp
764C57F3-DEFA-46EA-9A87-134244A5EEFF.webp
 
I had a ps pump start to whine that burping it wouldn’t fit. Replaced every piece of the system and used Red Head Gears for the rebuild.

Hey Joey, Can you ballpark me what they charged for that?
 
I removed my entire power steering system yesterday due to a huge, unidentifiable leak (or leaks) and now I'm trying to find the answer to this question. The rig has 262k on it and the steering box is the only PS component that definitely wasn't leaking. Unfortunately my TRE's were so worn that I have no idea how much slop is in it. If I move the pitman arm back and forth there's maybe 1mm of free play before the input shaft moves, which seems pretty good to me. The adjustment screw is still sticking out about 2mm above the nut, I read in another thread this is a good sign?

Trying to decide if it's worth $400 + freight for a remanufactured box (Red Head). I'd rather get one of their units already done than spend the money trying to rebuild/reseal mine myself. Out of work right now and that money could be better used elsewhere, but in my heart I'm a "while you're in there" guy.

Anyone have any insight or other things I should consider?
 
$30 for a rebuild kit, $300+ for sector shaft upgrade (I might be wrong).

I rebuilt my steering box, replaced the high pressure hose, and swapped in a reman PS pump. Pulling the pitman arm can be tough and cracking open the steering box is messy, but the work isn't all that difficult. There's lots of really good how-to threads on MUD.
 
I'll be replacing all of the hoses and adding a new PS cooler regardless of what I do about the box. The rebuild kit I'm seeing from Toyota is $157 on ToyotaPartsDeal. I'm up to my eyeballs in so much other stuff, I'd rather buy a reman'd box than add it to the list :)
 
I'll be replacing all of the hoses and adding a new PS cooler regardless of what I do about the box. The rebuild kit I'm seeing from Toyota is $157 on ToyotaPartsDeal. I'm up to my eyeballs in so much other stuff, I'd rather buy a reman'd box than add it to the list :)
Haha! That’s exactly where I am. I’m a "while I’m in there" kinda guy but I’m in everything right now. It’s really hard not to rebuild it when it’s already out on the bench but I’m elbow deep in 100 other aspects of this build.

Just FYI: the rebuild kit and the upgraded parts are available from Carmarka for really cheap if you have the time to wait for them to come from the UAE. Partsouq is prob second lowest. Redhead Steering Gear will rebuild a pump with upgrade parts if you send them the parts for no more than a regular rebuild.
 
Last edited:
$30 for a rebuild kit, $300+ for sector shaft upgrade (I might be wrong).

I rebuilt my steering box, replaced the high pressure hose, and swapped in a reman PS pump. Pulling the pitman arm can be tough and cracking open the steering box is messy, but the work isn't all that difficult. There's lots of really good how-to threads on MUD.
105 Sector shaft upgrade is quite a bit more than that. A few different ways of sourcing the parts but it's closer to $600-700 for the sector shaft, new pitman arm, nut/washer and other necessary parts along with a new seal kit.
 
Another reason to do a rebuild is if you notice any twisting of the splines on the sector shaft. Sometimes the twisting can be hardly noticeable so put a straight edge up to the splines to check (might need to pull the pitman arm to do that). The twist will start right at the top edge of the pitman arm where the splines are exposed. Once the sector shaft starts to twist, you're on borrowed time before breaking the sector shaft, especially with larger tires.

This is the stock 80 shaft I just replaced. Twist in minor but still enough to warrant replacement.
Steering box by Adam Tolman, on Flickr
 
105 Sector shaft upgrade is quite a bit more than that. A few different ways of sourcing the parts but it's closer to $600-700 for the sector shaft, new pitman arm, nut/washer and other necessary parts along with a new seal kit.

Carmarka (Dubai, Genuine Toyota Dealer):
105 Pitman Arm: $62
105 Sector Shaft: $170
Rebuild Kit: ~$85 I think?

Shipping will be a quite a bit more than US shipping but not $400. And a wait of 2-4wks.
 
Carmarka (Dubai, Genuine Toyota Dealer):
105 Pitman Arm: $62
105 Sector Shaft: $170
Rebuild Kit: ~$85 I think?

Shipping will be a quite a bit more than US shipping but not $400. And a wait of 2-4wks.
ok Good for you. Have you confirmed they are genuine Toyota parts. Could still be aftermarket parts even if it's a Toyota Dealer.

Pretty much all of the domestic options using genuine parts are similar in price to this complete kit.
 
Redhead Steering Gear will rebuild a pump with upgrade parts if you send them the parts for no more than a regular rebuild.

The pump as well, not just the gearbox? What upgrades can be done to the pump?
Another reason to do a rebuild is if you notice any twisting of the splines on the sector shaft. Sometimes the twisting can be hardly noticeable so put a straight edge up to the splines to check (might need to pull the pitman arm to do that). The twist will start right at the top edge of the pitman arm where the splines are exposed. Once the sector shaft starts to twist, you're on borrowed time before breaking the sector shaft, especially with larger tires.

This is the stock 80 shaft I just replaced. Twist in minor but still enough to warrant replacement.
Steering box by Adam Tolman, on Flickr

Hmm, good info. I wasn't planning on pulling the Pitman arm unless I was sending it to Redhead...
 
The pump as well, not just the gearbox? What upgrades can be done to the pump?

I misspoke. Gearbox. Not pump. Sorry.

ok Good for you. Have you confirmed they are genuine Toyota parts. Could still be aftermarket parts even if it's a Toyota Dealer.

Yes. Absolutely genuine Toyota parts from Japan. Same as ordering through Partsouq who is also in Dubai. My last order from them was over 100 individual parts (engine swap). I have to order overseas with my 1HDT.

But if you have the cash, definitely order from Joey @ Wits End. If he did the box rebuilds I’d be sending it to him. Waiting for my upgraded diesel fan clutch to come back in stock with him...
 
Back
Top Bottom