I brushed the snow off the soft top today first time in months that I touched it and it didnt empty my bank account (Do you think it some how knew santa had all my money this month?)
What have you done to your Land Cruiser this week? (31 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I installed a new air freshener
I did too and not a quarter mile later my daughter was snatching it up throwing it in a bag .... So, I did a u-turn back to the store and let her go in and pick out the air freshener...
HAHA That's funny, you gotta love kids!
But my air freshener is our Christmas tree on the roof. I love the smell of pine
Thanks, Hobbs
I installed EMU shocks a couple of weeks ago.....
Very nice and clean truck. Are those HFS springs? What size spring?
Brushed the snow off in case I need to use it.
4" skyjacker softride with 1 3/4 over stock shackles....Thanks.
Replaced bent rear spring, replaced rear locker, installed chismas light for lighted parade
Installed my rebuilt carb from Mark A. (purrs like a kitten), installed the sub-frame for the snowplow and loaded all my plow equipment (chains, tow straps, spare parts, jacks, shovels, etc, etc) into the back...
Built my belly pan and corrected my rear shackle angles.
oh no snow and it was 74 with a slight breeze. gota love florida weather.
oh no snow and it was 74 with a slight breeze. gota love florida weather.
Plugged her block heater in.
-30 C weather sucks.
-30 C weather sucks.
Josie'sLandCruiser
Stop calling it a "FJ."
Hi All:
Hey "TurnMeOver," tell us more about the "belly pan." Do you have any photos of it?
Thanks!
Alan
------------------------------------------------------------------
Hey "TurnMeOver," tell us more about the "belly pan." Do you have any photos of it?
Thanks!
Alan
------------------------------------------------------------------
Started the 2 F!
This week I stripped and painted all the radiator mount pieces.
Then I rigged up a hot wire and ground for my carb solenoid, plugged up the vacuum lines and fired her up for the first time since I put the 2F in
This week I stripped and painted all the radiator mount pieces.
Then I rigged up a hot wire and ground for my carb solenoid, plugged up the vacuum lines and fired her up for the first time since I put the 2F in
There is alot of bs chat on the post but The first and last posts are of the belly pan. And if you are making fun of my term belly pan then
Sorry I have meet my pic limit here.
http://nfcruiserheads.org/forum/index.php?topic=886.0
Last edited:
Josie'sLandCruiser
Stop calling it a "FJ."
Hi All:
"TurnMeOver," thanks for the link. The "belly pan" looks stout!
To post more pics here on MUD spend $20 on a Silver Star (the $$ help support this site.)
Regards,
Alan
"TurnMeOver," thanks for the link. The "belly pan" looks stout!
To post more pics here on MUD spend $20 on a Silver Star (the $$ help support this site.)
Regards,
Alan
It is 3/8 sheet . It is space 1.25 from the frame and protects every thing vital . It goes to the centr of the oilpan then up to the balancer. And yes I lifted the cruiser with it and it only flexed .25 inches. Use a floor jack to install it.
After the holidays I will send in the 20 for a star. Damn this economy.
After the holidays I will send in the 20 for a star. Damn this economy.
I picked up my 1970 FJ frame from the frame shop and stripped it down, getting it ready for POR15 or powder coat and ordered alot of new parts.
drove 4 hours round trip to pick up a roll cage and overhead rack with diamond plate for $250. It will need to be modified to fit with a hard top, but couldn't pass up the deal. Will try to post pictures soon. It is now in the driveway and we are supposed to get 12 to 18 inches of snow in the next 24 hours, so it may be buried! Cool Thread!
!
Getting a bit on the chilly side so installed my rear heater from the parts pig. Toasty! Also changed the oil and installed my new dome light with intact switch. Trying to figure out how to pull the steering wheel so I can swap for the much better one out of the parts rig. Any help on technique?
Getting a bit on the chilly side so installed my rear heater from the parts pig. Toasty! Also changed the oil and installed my new dome light with intact switch. Trying to figure out how to pull the steering wheel so I can swap for the much better one out of the parts rig. Any help on technique?
Drove it in a Christmas Parade.....
