What ATF Should I Use?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 27, 2010
Threads
10
Messages
73
Location
Bloomsburg, PA
I going to my buddies tomorrow to do some work on my Land Cruiser and 1 of my jobs is to flush some tranny fluid and put in some new. I am a little confused on what exactly I should be putting in my transmission? Can anyone point me in the right direction. At the auto parts store, I saw regular ATF and then import ATF. Someone please point me in the right direction. By the way my Crusier is a 1994.

Thanks!
Craig
 
Yes Dex/Mercon III+

Do not use ATF. Believe it or not I prefer the conventional over synth. If you plan on changing it all out you either need a flusher machine or you can do the drain/fill/drive/drain/fill/etc method. It takes quite a while and you'll end up using more fluid but that's the only other way to do it. Most of the fluid is in the converter.
 
i only use toyota atf, i drain and refill every oil change(2500 miles)
 
Any Dex/Merc III ATF will work fine. You can use Toyota T-IV fluid. Its backwards compatible, but expensive for what you need. The A440F and A343 call for Dex/merc. Some other Toyota transes do not like Dex/Merc fluids.

I've had good luck with Valvoline high mileage ATF. Frequent drain and refills work well. Flushing does not, especially on high mileage transmissions. Fluid exchanges are fine. Flushing can cause issues.
 
Any Dex/Merc III ATF will work fine. You can use Toyota T-IV fluid. Its backwards compatible, but expensive for what you need. The A440F and A343 call for Dex/merc. Some other Toyota transes do not like Dex/Merc fluids.

I've had good luck with Valvoline high mileage ATF. Frequent drain and refills work well. Flushing does not, especially on high mileage transmissions. Fluid exchanges are fine. Flushing can cause issues.


I have 300,000 on my transmission and have no idea when the fluid was change laast. I just bought it. What kind of problems are associated with flushes and why? Can you elaborate?
 
Can you do a poor man's flush and unhook one of the transmission cooler lines so the pump dumps out the old fluid as new is poured in? Keep going till the new fluid comes out. It helps to have a buddy working with you.

I have not looked at the lines on my new to me cruiser, but that is how I did it on my Nissan pickup.
 
I have 300,000 on my transmission and have no idea when the fluid was change laast. I just bought it. What kind of problems are associated with flushes and why? Can you elaborate?

High pressure flushes and back flushes will stir up debris that has settled in benign spots. Also high mileage changes can dissolve varnishes that are on the clutches and seals.

The only way to get old fluid out is to change it, but you do take a risk that the change will cause problems to surface. I would change it. You can even do an exchange where all the fluid is replaced, but don't flush it.
 
Yes Dex/Mercon III+

Do not use ATF. Believe it or not I prefer the conventional over synth. If you plan on changing it all out you either need a flusher machine or you can do the drain/fill/drive/drain/fill/etc method. It takes quite a while and you'll end up using more fluid but that's the only other way to do it. Most of the fluid is in the converter.

I prefer conventional over synthetics in trannies as well, but I don't like the idea machine flushes as they've been known to cause problems....

Drain and refill is the way to go....

Replacing the filter is a good idea too...


Any Dex/Merc III ATF will work fine. You can use Toyota T-IV fluid. Its backwards compatible, but expensive for what you need. The A440F and A343 call for Dex/merc. Some other Toyota transes do not like Dex/Merc fluids.

I've had good luck with Valvoline high mileage ATF. Frequent drain and refills work well. Flushing does not, especially on high mileage transmissions. Fluid exchanges are fine. Flushing can cause issues.


Although Toyota suggests Type-IV as a replacement, I've seen a few TSB's that suggest otherwise....

That's enough for me to stick with regular old Dex3 :meh:

toyotaatfchart.jpg



GM had a similar problem when they came out with Dex IV and said it was backwards compatible with anything that called for Dex3, however, those with manual transmissions that originally called for Dex3 ATF started having shifting issues...

It got so bad that some dealers actually started voiding warranties because their customers didn't use Dex3 as specified in their manuals, but used Type VI instead :bang:
 
Can you do a poor man's flush and unhook one of the transmission cooler lines so the pump dumps out the old fluid as new is poured in? Keep going till the new fluid comes out. It helps to have a buddy working with you.

I have not looked at the lines on my new to me cruiser, but that is how I did it on my Nissan pickup.

Yup, there's a write up on here that explains how to do it. Did it on my '97 and it was really simple. I'll be doing it to the LX soon. After doing that I'll just drain and fill at every other oil change.
 
Thanks everyone for the great feedback. I have to say, I put a new OE set of shocks on my Crusier this weekend and the ride is from night to day. I'm not joking when I say the shocks were the originals. The outer casing on the rears were almost completely rusted away. Also, getting the top rear shock bolts out was quite challenging. Had to use an impact gun. I just can't get over how amazing the car I have is. I bought it for $400 in March. The lady who sold it to me thought the motor was blown and wanted to get rid of it. I literally replaced the spark plugs, wires, and distributor cap and it runs like it's brand new. Everthing inside works. Her downfall was she wasn't ever maintained. She has a few small spots of rus on the doors. and I dont think the poor girl was ever washed. I know the wheels weren't. Brake dust completely obliterate the beautfiul rims :( But i'll quit blabbing about my Crusier, but I have to say they are AMAZING!

I do have one question or request I should say. I am looking to buy a used air intake boot. Mine is completely rotted and I am currently duct taping it. Does anyone have one for sale? Please let me know, I would like to purhase immediatley.
 
Yup, there's a write up on here that explains how to do it. Did it on my '97 and it was really simple. I'll be doing it to the LX soon. After doing that I'll just drain and fill at every other oil change.

Thanks for the info, every other oil change sure seems like a short interval, but maybe that is what it needs to keep working with a continual fluid change.
 
Advance Auto Parts sells a 5 gallon bucket of Dex III for around $45 dollars. It's the best price to be found if you end up doing a full fluid exchange, which I highly recommend. Changing 4 quarts in a 20 quart system doesn't really make sense to me.
 
I had the opportunity to drop my transmission pan recently. I found that if you first drain the pan and then replace the drain plug, in another 24-48 hours whatever fluid was sitting inside the valve body and torque converter has a chance to drain back to the pan. Pull the drain plug a second time and you'll get a bunch more fluid out. This is a completely passive way to remove most of the fluid, but it takes time.

FWIW, I've used Amsoil synthetic ATF for the last 10 years and my truck has always had regular tranny drain and refills her whole life, typically once a year. The pan was absolutely spotless after 19 years and 225K miles.
 
Back
Top Bottom