Weber 38 install question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 10, 2006
Threads
87
Messages
2,188
Location
North Pole, AK
I've got a 1971 Fj-40 with the "F" engine, and am planning to install a weber 38DGAS in it. The truck has an old crappy Rochester on it now that's been rebuilt at least 4 times, and it's completely worn out. My question is: does anyone have any pics of thier installed weber, I can't find any threads pertaining to the install, and I really need pics to see how the linkage hooks up. Any help would be appreciated.
Thanks
TK
 
Are you getting a new Weber, or a used one? Make sure all your gasket sealing surfaces are very clean. If you are getting a kit from one of the usual vendors of said Weber 38, and it has the adapter plates, it is common for the bolts to be a touch long and cause a sealing problem at the base of the carb. A couple minutes with a file or dremel fixes this issue.
 
2f but it should be close to the same.

1247921-IMG_6280r.jpg


1247921-IMG_6281r.jpg


Disregard the egr hose going into the filter area. It has since been moved to a port at the base of the weber and valve cover vent installed into this location.
 
'71 has cable linkage as OEM correct? pretty sure it does, cause i'm pretty sure i'm using a '71 cable and pedal on my '77 for the weber.

isn't a 38 a bit much for the F? i thought "they" said the 36/32 was better suited for the earlier engines?
 
brian said:
'71 has cable linkage as OEM correct? pretty sure it does, cause i'm pretty sure i'm using a '71 cable and pedal on my '77 for the weber.

isn't a 38 a bit much for the F? i thought "they" said the 36/32 was better suited for the earlier engines?

not according to this:
https://forum.ih8mud.com/showthread.php?t=103869
 
Back
Top Bottom