Vader light replacement / replica

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2005
Threads
474
Messages
4,670
Location
Oregon
I am currently building a73 fj40 that isn't a FST but will be wearing a OCD top with factory bows.
It does have two holes to the right of the dash that are factory and appear to match where a vader light (dash light) and mini pull switch would go.
So i started searching for a vader light. Very rare, then @Racer65 had some for sale on his awesome site. (I bouught his electric power steering for a 78 that i built) but I was to slow and missed out. So my search continued. And I found something that could easily pass for a factory dash light. So i ordered it and it fit like a glove!
So here's a pic of it installed with the mini switch which was already in this rig.
The best thing about it was that it was only 20 bucks shipped! :)
Three eBay item number is...
131381361604

20170617_151433.webp
 
That looks pretty danged good.
 
Just installed mine. The hole in the dash was large enough to recess the light. Just needed to make a spacer for the back side. A bit of nickel paint and it is going to be close enough.

723A4B93-35B0-472D-AFFD-C5C29D5E6138.webp


55A6AB5D-4EEC-4FAB-A938-5ED8C02BF994.webp


1492481D-75B7-4EFB-ACB4-774F71372724.webp
 
I actually ended up installing mine with the spacer solution like above. Nice work!

I'm glad some peeps have taken advantage of this great deal.

Also, I made a 3D printed replica Vader Hood that slips OVER this light. But I never advertised it, and it has been lost in the recesses of my brain. :)

Maybe I should re-visit it.


vader hood.webp
 
Last edited:
Back
Top Bottom