Transfer case damage - what breaks?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Most of the contact I have seen is around the tcase

View attachment 1955727

So I went to this in case I go to the Walmart parking lot

View attachment 1955734

Are those the same lower arms as this thread or have you since found that amount of sleeving to be insufficient and beefed them more?


I’m not surprised the skid took more abuse there. It’s bigger so the truck will hang up more there.
 
Are those the same lower arms as this thread or have you since found that amount of sleeving to be insufficient and beefed them more?


I’m not surprised the skid took more abuse there. It’s bigger so the truck will hang up more there.

Same just replaced the bushing a few times. I had a friend do the calcs and they will not be easy to bend.

Interesting the clearance directly under tcase on the old belly is better than OEM stock and the new replacement. I do agree the full belly adds to more contact. Its new for me so more parking lot testing is needed.
 
Same just replaced the bushing a few times. I had a friend do the calcs and they will not be easy to bend.

Interesting the clearance directly under tcase on the old belly is better than OEM stock and the new replacement. I do agree the full belly adds to more contact. Its new for me so more parking lot testing is needed.

I wouldn’t be so sure it will take a lot to bend them. We used your thread to sleeve my buddy’s right before our thanksgiving vacation and he bent both of them in the first two days. The sliders held up great, though.

C9FEEDD4-6208-4501-AC52-DBB9B6AC4484.webp


I would also consider taking that giant rubber block off the side of your tcase. My buddy ripped his off, taking parts of the tcase with it. I think that was also in a Walmart parking lot, though.
 
My stock leaf guard seems to be handling driving over the occasional Walmart shopping cart.
1955744


For abuse reference, here's the door dings I've accumulated at Wally World-
1955745


If you like to pop wheelies and drop the truck on armored Fiats, or you like to have all the stuff the cool guys have, I guess a proper transfer skid would be advisable. If you pay attention to your line and go easy on the skinny pedal, maybe not so much. The stock skid prevents direct contact and offers some cushion to the transfer case, which is all I've found necessary. But, I'm a pussy, so there's that.
 
Bait taken 😊
DOM or POOP pipe could be the difference. But yes put yourself in the wrong spot and anything can happen. I have 9 years and plenty of contact starting at the frame and up and over the LCA pocket onto the LCA and no issues. Maybe it was my rock rail took the force off the LCA :flipoff2:

Thanks for the bumper tip. No different feel without Im assuming.
 
Bait taken 😊
DOM or POOP pipe could be the difference. But yes put yourself in the wrong spot and anything can happen. I have 9 years and plenty of contact starting at the frame and up and over the LCA pocket onto the LCA and no issues. Maybe it was my rock rail took the force off the LCA :flipoff2:

Thanks for the bumper tip. No different feel without Im assuming.

I never noticed a difference. The bumper being taken off might make the clunkiness of the tcase a little more noticeable but without a VC in my truck, I couldn’t tell you as it clunks more anyway.

The arms were done with DOM, but it’s my guess holding a 6,000lb truck on a rock will bend just about any arm.

I don’t remember what I used on mine at this point, I know it’s DOM, but I forget the thickness. They didn’t bend, but I also didn’t look too closely because I was preoccupied with things like the gas tank.

Everyone wants to ask about tcase protection and I’m over here like:
F10A4328-1CB1-43A1-8E28-3B83108F46AF.webp
 
Bait taken 😊
DOM or POOP pipe could be the difference. But yes put yourself in the wrong spot and anything can happen. I have 9 years and plenty of contact starting at the frame and up and over the LCA pocket onto the LCA and no issues. Maybe it was my rock rail took the force off the LCA :flipoff2:

Thanks for the bumper tip. No different feel without Im assuming.
To be fair, the LCA damage pictured didn't happen in Az. It was someplace with proper rocks, not the frufru ones we have. And the poor bastard was following Richard, which is... inadvisable.
 
My stock leaf guard seems to be handling driving over the occasional Walmart shopping cart.
View attachment 1955744

For abuse reference, here's the door dings I've accumulated at Wally World-
View attachment 1955745

If you like to pop wheelies and drop the truck on armored Fiats, or you like to have all the stuff the cool guys have, I guess a proper transfer skid would be advisable. If you pay attention to your line and go easy on the skinny pedal, maybe not so much. The stock skid prevents direct contact and offers some cushion to the transfer case, which is all I've found necessary. But, I'm a pussy, so there's that.

Hahaha, you bent that stupid plate back that goes between the rear cone and the rest of the housing.

The rear portion of the rocker is looking mint. You need to back up more and even it out.

To be fair, the LCA damage pictured didn't happen in Az. It was someplace with proper rocks, not the frufru ones we have. And the poor bastard was following Richard, which is... inadvisable.

Because he followed me? You’ve followed me. Are we going to start blaming me for you know what, never mind. I’m not starting that conversation again.

Before you even start, the guy in the Jeep bent his drag link when he was in front of me, he wasn’t even following me. So shut up.
 
Hahaha, you bent that stupid plate back that goes between the rear cone and the rest of the housing.

The rear portion of the rocker is looking mint. You need to back up more and even it out.



Because he followed me? You’ve followed me. Are we going to start blaming me for you know what, never mind. I’m not starting that conversation again.

Before you even start, the guy in the Jeep bent his drag link when he was in front of me, he wasn’t even following me. So shut up.
I just had that stupid plate out and straightened it. **** that plate, it's weak, OK? Is there an aftermarket solution for that?

And there's a difference between following and being behind. I pick my own lines, thanks. :flipoff2:
 
Back
Top Bottom