TLC's for Dummies?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2006
Threads
3
Messages
21
Location
Steamboat, CO
Website
www.sharpdesigns.com
Ok, I'm not mechanically challenged, but mostly just uninitiated. :grinpimp:

I'm wondering if anyone can recommend or point to some materials for a newbie like me to start understanding all that is TLC. I know that eventually I'll want to get the FSMs and probably the Chiltons or Haynes manuals, but I'm wondering if there is something just slightly more "newbie-ish" than these...

I.E. a "Everything you wanted to know about TLCs but were too scared to ask" kind of book/manual/site.

For example, there is a lot of terminology when dealing with any vehicle and a lot more when dealing with Cruisers in particular. I know that. But I don't know the terminology.

I guess what I'm asking is: now that I've got a Cruiser again, I want to get in deep, but I want some book-learnin' first before I get the grease-under-the-fingernails. It's the way I am.

Is there a "So you wanna start working on your TLC but don't know where to start?" book?

Thanks!

-Danimal :cool:

P.S. I suspect I'm not the only one in this boat. I also suspect (and hope) that this will be a quick transition to the level where I'll be beyond a TLC for Dummies level.
 
woody said:
http://www.CruiserFAQ.com

outta kill an hour-three reading thru all the details in there...

Woody,

Yeah, I've read that FAQ and will go back and read more in depth, but (a) it is very technical by nature and (b) it assumes some basic knowledge about stuff... some of which I have and some of which I probably don't.

I am hoping for something that will bridge the gap between "I wanna work on this rig but don't know enough to even know where to start" and "I have the groundwork knowledge and now just need the FSMs/Haynes and ih8mud:D to get started".

I kinda feel silly asking, because given that my '76 is my second FJ40, I oughta know more... but I don't. Just a hunger to know more and get my feet wet (er... hands dirty!)

Thanks!

-Danimal :cool:
 
belong to a TLCA club yet?

great way to get your feet...er, hands dirty...Rising Sun is very active, and there are other CO-Cruiser clubs out there too...

friendly bunch, lots of wheelin, and the wrench parties get you in the action without the stress of your own rig ;)
 
woody said:
belong to a TLCA club yet?

Man, I wish! There aren't any here in Steamboat (that I know of) and the other CO clubs are all on the Front Range, which is a bit of a drive. It would probably be worth it, though.

Interestingly, I was thinking about this the other day and wondering what it would take to start a club here in Steamboat. I've counted over 15 FJ40's that I've seen in the past year (and who knows how many other FJ/BJ/etc's there are).

How does one start a TLCA club? I guess I start by becoming a TLCA member, eh? ;)

-Danimal :cool:
 
There are no such books that you describe out there.

But there are some good books worth getting. What I found that worked for me was referring to more than one book while working on some project. I have the Toyota factory manuals, the Aussie Gregory's Manual and the Haynes. Reading the relevant section in all of these books would sometimes make things easier to understand rather than just following along with one book. The best books are the factory manuals though.

There is a TON of info online. The Mud tech section and the TLCA Mailing List are the best sources for research. The older cruisers are fairly straight forward beasts and just about everything has been discussed before. Before Mud became so popular the TLCML ( Toyota Land Cruiser Mailing List) was the place that guys got their questions asked. Take the time to discover the archives and get some experience with the search engine. Learning how to use the correct search words can really help find the golden info you seek.

Max
 
CruiserMax said:
There are no such books that you describe out there.

Well, WTF, with all these resources???? Why don't we put some of these ideas and experiences in format? I spent menay years on air culd VWs before TLCs and there is so much out there it is incredible. VWs for dummies, etc. I see an op for the forum...:popcorn:
 
Check out some of the user web sites. You can find them in the user sigs. There you will get a LOT of newbie stuff and a lot of tech stuff.

I find that using the search function here on MUD to look up a topic you want to know more about, then reading all the threads, is the most valueable source of information there is.
 
Don't be afraid, just ask. :grinpimp: This is the best resource on the planet. Oh and the standard welcome :flipoff2:
 
llih said:
Don't be afraid, just ask. :grinpimp: This is the best resource on the planet. Oh and the standard welcome :flipoff2:

Thanks!

Yeah, I guess maybe what I need is a good overall resource for vehicle maintenance to understand all the ins-and-outs in general, and then use resources like this forum and the FSMs and such for TLCS specifically.

Maybe an "Auto Repair for Dummies" wouldn't be a bad start (if there is something like that) :grinpimp:

-Danimal :cool:
 
I've seen it said that the book linked to above is mostly useless as a general guide to cruisers and is mostly minitruck and Chevy conversion stuff.

Hayne's is written like the author has done most jobs himself. It's sometimes easier to find stuff in Haynes than in the FSMs, and it's often more complete step by step info also.

There are hundreds of websites put together by individual owners and many of them are well done and thorough. http://rzeppa.org/ is an example.

This site is a goldmine of tech fact that takes some hunting around to find: http://www.birfield.com/ and in there you can get onto this mailing list: http://mail.birfield.com/mailman/listinfo/landcruisers

There's really tons of info available without the need to spend a dime getting it.
Do a search using your favorite engine and maybe come up with a few new ones.
 
second what 73guppie says... that and just do it. i was scared of doing an oil change a year and a half ago, now i'm rebuilding motors, installing lockers, modifying suspension, doing my own power steering, and keeping a 30 year old truck running.
 
I had SOR, Downey and the haynes manuel before I bought my cruiser, I wanted to know everything about these beast! Don't be affraid to try, read all you can find about cruisers...... AND JOIN THE TLCA !!!!! :D Even just for the ''toyota trails'' magazine, it's worth every $$$$ you'll spend.


You'll hate yourself for not doing it sooner :flipoff2:
 
Order the collector sets of Toyota Trails when you join TLCA. Read the tech sections and build ups. See what was done yesterday and today..........It is amazing how when you get to working on your truck its like you have already been there and seen it done.
 
Back
Top Bottom