Tightening Up Steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Idaho Savage

GOLD Star
Joined
Mar 9, 2017
Threads
48
Messages
1,035
Location
Idaho
Hey Gang,

So my 1970 FJ40 has a 5.3L, Chevy steering wheel, shaft and box. It's got the ubiquitous OME lift, 33's on City Racers and is pretty well maintained.

Here's the question...thanks to the 5.3, she can get up to 60mph with ease but gets pretty loose-goose in terms of wandering and bump steer. All of the linkages are both tight and lubed and it does have the OME steering stabilizer.

I do realize I'm asking a 50 year old truck with an enhanced drivetrain and short wheelbase to act more civilized but I'm wondering if there's anything I can do to try to improve the handling.

Am I simply asking too much or is there something to pursue? Any help would be appreciated.
 
What is your alignment?

With regard to bump steer and rolling over seams and cracks, larger tires are more prone to wander and cause bump steer.
 
I’d echo the caster. I have OME and shackle reversal. I’m able to drive one finger on the wheel. Also check you ubolts and suspension torque.
 
Toe in should also be checked with the above items.
 
It woud probably be a good idea to post pics of your gm steering setup. The bump steer comment makes me wonder how it was adapted. The drag link might be too steep or the box is too far forward in comparison to the tierod. As others have mentioned, caster, good bushings, tire pressures, etc.
 
Thanks gang. I'll check out the castor, alignment and ubolts to start, then report back.
 
Back
Top Bottom