Thumping when braking

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 28, 2016
Threads
14
Messages
93
Location
muscatine IA
Hey guys, recently replaced my front rotors, calipers, and pads on my 96 LC. There was a thumping before I changed everything, the thumping is still there when I brake. when I first got the LC it had a moderate buzz or fast pulse when I braked, now its a heavy THUD..THud..Thud..thud(slightly better than before) , the LC stops just fine, Is this a booster issue? Or possibly something with the rear disc brakes as I did not change them due to funds at this time. I have scoured through the searches/posts nothing that really sounds like mine, mostly warped rotors..I guess if it is the rear rotors than that could be it, something tells me brake booster tho. thought?
 
did you replace all the brake pad hardware too? Abutment clips, retainers ect. These are often missed items that if neglected can cause all sorts of sounds.
 
yes, new everything on the front, calipers, pads, rotors. You can definitely feel the Thumping the closer you get to a full stop. All the rear brakes, rotors and pads are old.
 
I had an issue once when a caliper bolt had come loose and fell out - when braking it would thud/knock as the brake pad would catch the rotor and the caliper would rotate on the other bolt. It was an easy fix - just got a new bolt and torqued it to spec. Not saying that is what you have, but it is worth a look.
 
You could also have someone walk beside the truck while you are braking to try an isolate where the sound is coming from. Might help narrow down where to start looking.
 
Pads & rotors are several items. I can't remember if there are pad retainer clips or springs on the front but if if so were those replaced too?

Like these
images


Often the driveline makes clunks, when was the last time your U joints and slip yolks were greased?
 
Last edited:
the brake pad are held in by a large clip, two long studs that go through the caliper and brake pad secured by a small wire(cotter pin) I'm sure they are good.
I have not greased anything, and I am sure it could use it, the LC was in pretty rough shape when I got it..slowly restoring it. U joints could be a possibility, but I feel like its a braking issue, wouldn't I feel the u-joint driving forward or at higher speeds? drive train seems very solid, no clunking or rattling when shifting into park/natural/Drive or as it accelerates through the gears, its very smooth.
 
Have you actually checked the rear pad thickness and rotor condition?

The rear pads can wear sufficiently to 'fall out' of their retainers and then your piston can become the 'pad'....

cheers,
george.
 
Have you actually checked the rear pad thickness and rotor condition?

The rear pads can wear sufficiently to 'fall out' of their retainers and then your piston can become the 'pad'....

cheers,
george.
they were worn down, but not real bad, it was more of a money issue why I didn't replace them, probably should have! the old lady is already pissed that im tossing money "at that piece of crap", we are headed out on vacation this weekend so my spending had to stop. :)
 
Have you actually checked the rear pad thickness and rotor condition?

The rear pads can wear sufficiently to 'fall out' of their retainers and then your piston can become the 'pad'....

cheers,
george.
This was the case when I bought my 80.
 
Anyone have any ideas on the ABS system? when my ABS light is off, I do NOT have any issues, when it comes on the thumping returns when I brake..can I bypass the ABS?
 
Do you think the thumping is the ABS cycling? Go find an empty gravel lot and spend some time working the ABS. There are a lot of threads about this that should be easy to search for. I think there was a newish one here in the last few days.
 
over my lunch break I took the cruiser out on some gravel, I was able to get the ABS to engage and I could feel the brake working, I did this several times, it seemed to help some on the pavement when braking/thumping. I may just end up, removing the whole ABS system, I read a nice write up on it here on MUD.
 
It sounds as though you are having ABS activation issues, the thumping being felt through the brake pedal? If you can feel the 'thumping' then this is the ABS 'modulating', i.e. thinking you have a wheel about to lock.

Many things can cause this, check and clean the ABS sensors, check the wiring for chafing and breaks. Something I came across a few years back was the bronze guide inside the hub where the CV runs can become worn oval, this allows some 'run out', so the wheel slip sensor loses the 'pulses' from the tone ring which is fitted on the CV joint itself. If your savvy with a multimeter try getting a reading from the wheel slip sensors.

regards

Dave
 
My bet is on the speed sensor in the front knuckles being worn down by the bird. Or parts of your parking brake are stuck to the magnetic speed sensor in the rear. As Dave said check your speed sensors, its relatively easy to do.
 
The weird thing is when the ABS light goes off, everything works perfectly fine. I'm half tempted to scrap the ABS system.
 
Back
Top Bottom