Superflex radius arms

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

... I'd say, in my opinion, most aren't looking for maxing out 14" travel shocks in the front (though I'm proud to say my truck has them) - most are looking for a little gain. ...

Agree, freeing the front enough to match stock, closer to the rear, works well without drastically effecting road handling. It looks like the super flex arms do this mostly by moving the bushings closer together, allowing more axle movement before the bushings run out of travel. Would love to see them in action. On a big lift rig, wonder if they flex the same on both sides? My guess is they flex slightly better when the super flex side is drooped?
 
It still amazes me that this discussion still comes up. Make your truck ramp 1000 and still be able to run 80 on the hwy with factory handling dynamics, and you MIGHT make it 100 ft further up the trail than your buddy with his off the shelf, bolt on, aftermarket suspension kits and 35s. Its an 80. 5500 lbs.+ of station wagon. To build a 3 or 4 link "kit" that works is going to involve cutting, welding, gas tank work, etc. Even if someone does build a perfect kit, how many are they going to sell to the 80 series crowd? The 1 thing I have heard more than any other gripe about the 80 series is being able to gear down more. A bolt in crawl box is available and has been for years, but gas tank mods are required, so how many 80 series guys have jumped on them? 3-4? Not trying to discourage anyone from making a great product, but it doesnt sound to profitable, and just because you can doesnt mean you should.
 
It still amazes me that this discussion still comes up. Make your truck ramp 1000 and still be able to run 80 on the hwy with factory handling dynamics, and you MIGHT make it 100 ft further up the trail than your buddy with his off the shelf, bolt on, aftermarket suspension kits and 35s. Its an 80. 5500 lbs.+ of station wagon. To build a 3 or 4 link "kit" that works is going to involve cutting, welding, gas tank work, etc. Even if someone does build a perfect kit, how many are they going to sell to the 80 series crowd? The 1 thing I have heard more than any other gripe about the 80 series is being able to gear down more. A bolt in crawl box is available and has been for years, but gas tank mods are required, so how many 80 series guys have jumped on them? 3-4? Not trying to discourage anyone from making a great product, but it doesnt sound to profitable, and just because you can doesnt mean you should.

agreed.

gearing is the one big thing holding back the 80. take all the money you have planned for a custom suspension and put 5.29's in the diffs and put the 3.1 marks tcase gears in the tcase and wheel away.

but a rubicon express type radius arm will flex so much better than a modified oe arm like the one that started this thread. people need to stop making new oe type arms that will always bind up and make better radius arms. think jeep
 
It still amazes me that this discussion still comes up. Make your truck ramp 1000 and still be able to run 80 on the hwy with factory handling dynamics, and you MIGHT make it 100 ft further up the trail than your buddy with his off the shelf, bolt on, aftermarket suspension kits and 35s. Its an 80. 5500 lbs.+ of station wagon. To build a 3 or 4 link "kit" that works is going to involve cutting, welding, gas tank work, etc. Even if someone does build a perfect kit, how many are they going to sell to the 80 series crowd? The 1 thing I have heard more than any other gripe about the 80 series is being able to gear down more. A bolt in crawl box is available and has been for years, but gas tank mods are required, so how many 80 series guys have jumped on them? 3-4? Not trying to discourage anyone from making a great product, but it doesnt sound to profitable, and just because you can doesnt mean you should.

I agree on the biz part, the ‘80 market is small and already diluted.

This argument is old and doesn’t hold water; “you MIGHT make it 100 ft further up the trail than your buddy”. Who cares, it is a hobby, my guess is, most here don’t have a need to go off road at all, so no “need” for the rig, let alone any mods. That argument is even more ironic, considering the source, IIRC, Gary you pushed the term “80 series turd polishing” to new, obscene heights?:cool: Who in their right mind would pull a perfectly good body off of an ’80, then spend huge $$$ & labor installing a crude, smaller, old body. Would all of that effort make to go 100 ft further up the trail, maybe, but the effort is not aligned with the increase, who cares? For the coup de grace, who would remove a reliable motor and convert it? Would that make to go 100 ft further up the trail, my guess would be no. :hillbilly:

It’s a hobby, people enjoy their hobbies differently. Some show up at the local 4X4 store with a catalog and a credit card and say, install everything in that catalog on my rig, using that CC. Others spend huge effort making something that looks unique. I’m in the group who enjoys exploring the engineering, how does it tic and what happens when something is changed. It is all turd polishing and who is the judge to say one persons preference is better, who cares? If everyone did exactly the same build it would be a very boring, stagnant, hobby and nothing would ever be learned?:hillbilly:
 
It still amazes me that this discussion still comes up. Make your truck ramp 1000 and still be able to run 80 on the hwy with factory handling dynamics, and you MIGHT make it 100 ft further up the trail than your buddy with his off the shelf, bolt on, aftermarket suspension kits and 35s. Its an 80. 5500 lbs.+ of station wagon. To build a 3 or 4 link "kit" that works is going to involve cutting, welding, gas tank work, etc. Even if someone does build a perfect kit, how many are they going to sell to the 80 series crowd?

What you basically said was, it doesn't matter whats under the vehicle, it will only go another 100'. People dont get rid of leaves just to look cool. Ok some do but lets not talk about those guys. All show and no go isn't my style. But if this is true then why on earth does every serious competitor build link type suspension over 100 year old technology. Its isn't for a 100' performance gain. Why on earth would any OEM favor coils.

And as far as it being a small nitch group of people that buy it, what buisness is it of yours who makes it or buys it. If its not for you then fine be happy with your bolt on stuff. And yes a better kit is only doable with cutting and welding, thats kinda what we've been saying in this thread for awhile. Thats why all these other big companies haven't done it, they are looking for dollar signs. How many companies make a kit for Mini's, only a few. No one builds kits, because it's very involved, its a nitch market. Be happy with what you got, and be happy for those that want more. Its a big world out there, lets play nice.
 
What you basically said was, it doesn't matter whats under the vehicle, it will only go another 100'. People dont get rid of leaves just to look cool. Ok some do but lets not talk about those guys. All show and no go isn't my style. But if this is true then why on earth does every serious competitor build link type suspension over 100 year old technology. Its isn't for a 100' performance gain. Why on earth would any OEM favor coils.

And as far as it being a small nitch group of people that buy it, what buisness is it of yours who makes it or buys it. If its not for you then fine be happy with your bolt on stuff. And yes a better kit is only doable with cutting and welding, thats kinda what we've been saying in this thread for awhile. Thats why all these other big companies haven't done it, they are looking for dollar signs. How many companies make a kit for Mini's, only a few. No one builds kits, because it's very involved, its a nitch market. Be happy with what you got, and be happy for those that want more. Its a big world out there, lets play nice.


Well said!
 
What you basically said was, it doesn't matter whats under the vehicle, it will only go another 100'. People dont get rid of leaves just to look cool. Ok some do but lets not talk about those guys. All show and no go isn't my style. But if this is true then why on earth does every serious competitor build link type suspension over 100 year old technology. Its isn't for a 100' performance gain. Why on earth would any OEM favor coils.

And as far as it being a small nitch group of people that buy it, what buisness is it of yours who makes it or buys it. If its not for you then fine be happy with your bolt on stuff. And yes a better kit is only doable with cutting and welding, thats kinda what we've been saying in this thread for awhile. Thats why all these other big companies haven't done it, they are looking for dollar signs. How many companies make a kit for Mini's, only a few. No one builds kits, because it's very involved, its a nitch market. Be happy with what you got, and be happy for those that want more. Its a big world out there, lets play nice.

not knocking your bolt ons but as someone who has been totally through the 80 in every way i can honestly say that all the available bolt ons give you is a way to fit bigger tires by moving the axle away from the body. and in all honesty the 80 will wheel better if you dont change the suspension at all and cut the body away to mount the same bigger tires.

and ouside of gearing the oe radius arms and the design around which they exist are severly limiting the crawler potential of the 80. people need to stop polishing the terd which is the inferior 80 radius arms.

free yourselves brothers. you dont need to cut up your trucks but toss your oe 80 series radius arms for some jeep radius arms
 
I didnt realize I was playing mean. Most people know me better than that. I wasn't making it my business as I dont have a business anymore. I/we have heard about "the best 3/4link kit" for years and they dont ever materialize and the builder doesnt either. I agree with you Kevin about the "turd polishing" and maybe I should keep my opinions to myself, but the thread is about a particular manufactures arms which do seem to improve front articulation some, but Newbies who are wanting to build up their 80s get very lost in threads like this because it leads them to believe that their trucks won't wheel like their buddies Jeep unless highly modified. My 45 on the 80 chassis was for me to get an old truck on late model running gear. What it taught me was that the limit of what an 80 can do is not the suspension, its the weight and body size. I've been around a long time and am probably the most satisfied 80 series guy there is. I welcome new products and new people to the forum, but the 3/4 link thread has been debated for years and built many times professionally and proven its worth on an 80. 4wheelunderground, I wish you the best of luck on this and keep us posted in your own build thread on the progress and testing. If it works as you say, I will be your first customer.
 
Last edited:
not knocking your bolt ons but as someone who has been totally through the 80 in every way i can honestly say that all the available bolt ons give you is a way to fit bigger tires by moving the axle away from the body. and in all honesty the 80 will wheel better if you dont change the suspension at all and cut the body away to mount the same bigger tires.

and ouside of gearing the oe radius arms and the design around which they exist are severly limiting the crawler potential of the 80. people need to stop polishing the terd which is the inferior 80 radius arms.

free yourselves brothers. you dont need to cut up your trucks but toss your oe 80 series radius arms for some jeep radius arms

Yep. What he said, but who said 80s were turds anyway? I have watched 80s follow insane 4 linked buggies at BFE, Las Cruces at the Chile Challenge, and many other trails and other than major body damage, they did pretty well.... AND afterwards loaded their wives and kids up, fired up the AC , plopped in a DVD, and drove home. pretty impressive to me.
 
agreed.

gearing is the one big thing holding back the 80. take all the money you have planned for a custom suspension and put 5.29's in the diffs and put the 3.1 marks tcase gears in the tcase and wheel away.

Maybe, maybe not, depending on use, the complexity, reliability hit, $$$, etc, may or may not be worth it.

... people need to stop making ...

So, you are the fun killer who dictates how everybody's rigs are built?:hillbilly:

but a rubicon express type radius arm will flex so much better than a modified oe arm like the one that started this thread. people need to stop making new oe type arms that will always bind up and make better radius arms. think jeep

Yep, agreed, spherical bearings if choice and some rod, making a multi link setup is easy and will net the most flex. Is it "best", that would depend on use. I would like to have a trailer rig, for local use and it would be smaller, lighter, more capable, etc, than an '80 series, but not likely to get rid of the '80. The "think heep" thing doesn't work for me, if I wanted one, they commonly available and have great support.

I own the '80 because it is the swiss army knife of wheelers. It is a relatively capable highway machine, that is also capable of running 4+ out of 5 trails and doing both in relative comfort. The big challenge is to make it more capable/comfortable off road without destroying the ability to highway cruise in a relaxed/comfortable manor. Designing for the best compromise is much more difficult than simply building a buggy.

Rig setup is all about intended use, I mod mine for my intended use, as everyone should. My use often includes long days, including both black top and trail. Some would not be doable with a trailer rig, the trailer move alone would be 100+ miles. A mileage summery of our SE Utah trip this spring, not going to happen with a trailer rig.

Saturday was the drive to Blanding with some Ruin hunting play: 344.99 Road and 24.68 Dirt.

Sunday was Texas Flat/Comb Ridge exploring: 32.73 Road and 51.3 Dirt.

Monday was The long way through Beef Basin: 107.18 Road and 63.1 Dirt.

Tuesday was Hart/Lavender Canyon exploring: 73.78 Road and 47.47 Dirt.

Wednesday was Tech and Rim overlooks: 174.33 Road and 12.69 Dirt.

Thursday Was Spike: 19.52 Road and 20.23 Dirt.

Friday was Behind the Rocks area: 26.48 Road and 35.24 Dirt.

Saturday was White Rim: 55.73 Road and 87.9 Dirt.

Sunday was the drive home: 478.78 Road.

Totals 1313.52 Road and 313.61 Dirt, for a grand total of 1657.13 miles.

A pix of our wanderings, sorry I like this pic.:hillbilly: But, if you know the area, it is vast, long days and the '80 makes it a joy to explore.:cool:

attachment.php
 
...
and ouside of gearing the oe radius arms and the design around which they exist are severly limiting the crawler potential of the 80. people need to stop polishing the terd which is the inferior 80 radius arms.

Actually the '80 crawls pretty good stock, for a bus!:hillbilly: Crawling isn't the primary priority/use for most.

free yourselves brothers. you dont need to cut up your trucks but toss your oe 80 series radius arms for some jeep radius arms

I wheel often with heeps and most stuff I have seen under them looks pretty light duty for an '80. Is this the arms we are looking for?:hillbilly::hillbilly:
18282_23.webp
 
Gary
The 80 is not a turd. The metaphor refers to the oe radius arms vs using a radius arm with a joint in the middle like in an aftermarket rubicon express type arm-an arm that would flex so much better and compromise nothing off road. A radius arm such as this performs almost as well as a three link yet compromises almost nothing in terms of stability. The 3 link makes several compromises and requires cutting

The argument that major suspension mods necessarily compromises drivability is flawed. If I take the 42s off my 80 and run 35 s it will run as stable as stock and ride smoother (with sway bars). if built right the truck will drive right. But big tires can never be made to drive as well as smaller tires no matter how well the truck is tuned

And The reason I wheeled my pre built 80 vs getting a jeep was because the 80 was a better multitasker-better ride, more reliable, carried more gear, etc. But the reason I can't give up my built 80 now in exchange for a jeep is because my 80 out wheels almost every jeep I wheel with and every mini I wheel with too. (unless the mini is linked).

In comparing an 80 to a late model jeep. Give the 80 some tires and gears and a flexy front end and it's SLIGHT weight disadvantage is compensated with a better wheelbase, a stronger steering, better axles, a rear suspension that is light years better than a late model jeep, a motor that is In it's own class, and a chassis that
is bombproof.

But to beat the horse again: unless expedition is as hard as you are wheeling the 80, the factory radius arm needs to be tossed in favor of a design that places a flexible joint between the the two axle attachment points. Why has this been done only once on this massive 80 forum?
 
But to beat the horse again: unless expedition is as hard as you are wheeling the 80, the factory radius arm needs to be tossed in favor of a design that places a flexible joint between the the two axle attachment points. Why has this been done only once on this massive 80 forum?

With this type of arm would the tie rod need to be moved?
 
not knocking your bolt ons but

I really dislike bolt ons, they suck.

free yourselves brothers. you dont need to cut up your trucks but toss your oe 80 series radius arms for some jeep radius arms

Radius arms are radius arms, it really doesn't matter, I've built Jeeps with that Rubicon express arm and its still does a whole lot of jacked up stuff off road. To much torque lean with those things and they still bind. And all because there is no upper link. Ditch that stuff man.


Well said!

Thank you!
 
I didnt realize I was playing mean. Most people know me better than that. I wasn't making it my business as I dont have a business anymore. I/we have heard about "the best 3/4link kit" for years and they dont ever materialize and the builder doesnt either. I agree with you Kevin about the "turd polishing" and maybe I should keep my opinions to myself, but the thread is about a particular manufactures arms which do seem to improve front articulation some, but Newbies who are wanting to build up their 80s get very lost in threads like this because it leads them to believe that their trucks won't wheel like their buddies Jeep unless highly modified. My 45 on the 80 chassis was for me to get an old truck on late model running gear. What it taught me was that the limit of what an 80 can do is not the suspension, its the weight and body size. I've been around a long time and am probably the most satisfied 80 series guy there is. I welcome new products and new people to the forum, but the 3/4 link thread has been debated for years and built many times professionally and proven its worth on an 80. 4wheelunderground, I wish you the best of luck on this and keep us posted in your own build thread on the progress and testing. If it works as you say, I will be your first customer.

Thank you, yes what I build wont be cheap fix, I dont think it can be with all that needs to be addressed when lifting these vehicles. I'll do the best I can and keep cost a consideration.
 
No like this

Givin you grief, but "heep arm" is confusing, among the ones I have been around, they have had about every type of suspension imaginable. I have always heard of those arms called Y link radius arms. Like most other types, they can be made as restrictive of free as the designer chooses.

They are most often chosen for light weight rigs. Due to the rotational load being carried midway on the main link, about the same place where they are often hit/landed on, they tend to be weak. On the '80, they have the same clearance/tie rod issues as any other link, so don't see any advantage? A couple have put them on '80s with :meh: results.
 
Radius arms are radius arms, it really doesn't matter, I've built Jeeps with that Rubicon express arm and its still does a whole lot of jacked up stuff off road. To much torque lean with those things and they still bind. And all because there is no upper link. Ditch that stuff man.

We have a winner.

(I was hoping I'd inspire this thread to keep going :grinpimp:)
 
Back
Top Bottom