Super duper mondo velcro from hell....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 21, 2003
Threads
861
Messages
17,047
Location
Tijeras, NM
Not a very technical question but has anyone truly found a super, duper, mondo, gorilla velcro that actually sticks to the 80 interior? Most I found tend to come off after the interior gets too hot. Right now, the added window pull down shade needs to stay put to keep the kid from baking but the darn velcro keeps losing its grip! :crybaby:

Does such a thing exist?
 
I have never found a sticky back product that will stay attached to a textured surface. If you can find a smooth surface (inside bottom of window opening), try attaching to that. Maybe some type of hook would work for you. Extend it down and hook it to the inside door handle.

Pictures would definitely aid in giving advice.

Riley
 
Yes- get the 3M velcro that says "super holding strength" on it. Just bought some but the box is in the truck. Will go check the exact type and get back to you. But I know it is 3M. Had tried a few before it and nothing held as well.
 
buy the velcro they have at radio shack. It is industrial hook type. Admittedly, the hook is stronger than the sticky back but the sticky back is better than average. The hook is so tight that it only lines up with the loop one way, they have to be alined parallel to each other. Its hard to explain but once hooked it won't come off w/o using most of your strength. That is why I say the hook and loop is stronger than the sticky.
 
Yes- get the 3M velcro that says "super holding strength" on it. Just bought some but the box is in the truck. Will go check the exact type and get back to you. But I know it is 3M. Had tried a few before it and nothing held as well.

That's the stuff. I live in Phoenix and have used this stuff on my dash, center console, and other places. It has never come off. Usually available at fabric wholesale stores.

Edit: Dammit, I quoted the wrong guy. Fixed.

-Spike
 
Last edited:
I can't wait till they get molecular velcro that uses van der waals forces to bond to any surface like a gecko foot :)
 
Ok, thanks for the info guys. I think I know the super/duper hook/loop that you speak of, that's what the hwy thieves (aka IPASS toll) send out to the customers for attaching the transponder to the windshield. Sounds like the same stuff.

Off to Radio Crack....
 
Ok, thanks for the info guys. I think I know the super/duper hook/loop that you speak of, that's what the hwy thieves (aka IPASS toll) send out to the customers for attaching the transponder to the windshield. Sounds like the same stuff.

Off to Radio Crack....

Me too...the crap I bought from Walgreens to attach my transponder to the windshield with sucks. My transponder would slowly slide down and then fall of...

Anyone know where a person can find the good 3M stuff just in case...
 
Silicone

Why can't you just silicone/ other adhesive the velcro to the surface..
 
I've had good luck with the stuff that I bought a Home Depot. It's branded as "Velcro - Industrial Strength".
 
It says let it sit for 72 hours for the best results so I'll know by the weekend if it'll hold a Cobra CB to the side of the Tundra console.

And that's actually the truth. I used some of the industrial velcro to mount my Scangauge. Right after I mounted everything up I gave it a test removal and pulled the velcro right off the plastic of the truck. I adhered the instructions and let it sit, it won't even budge now when I pull the gauge off. Works for the CB mounted to the back of the console also.
 
Damn it, I knew I forgot to get something tonight...hunger pangs diverted me to a ribeye with all the trimmings and then meat coma set in :beer:...back to my hotel...on the mud board....:popcorn:

Tomorrow.
 
Like SW... says; u can use a diff binder. I use GOOP, let it set for 24 hours. Work just fine.

...
 
Yes- get the 3M velcro that says "super holding strength" on it. Just bought some but the box is in the truck. Will go check the exact type and get back to you. But I know it is 3M. Had tried a few before it and nothing held as well.

I was about to say research something from 3M. Didn't know if they did make such an animal but figured they would be the best bet. Saw a thing on Discovery the other night about some industrial 2 sided tape they make to hold the windows on skyscrapers. Nothing else just the tape. They are the leader in the world when it comes to any type of fasteners and such involving polymers so it stands to figure that they would also lead the world in velcro I guess.
 
It's not the Velcro per se that they excell with, it's the adhesive on the back that rocks.

-Spike
 
Back
Top Bottom