SUA Flex. Show what you've got!

[T-bones 60]

Spectors w/ Man-a-fre Shackle reversal.

 

[Tennessee Jed]

Some of you blokes are getting some very nice flex out of your spring under rigs.

I am sittin' on the fence regarding how to life my rig SU or SO.

Take 30 or 40 $100 bills and hold them in one hand, then look at post #14.

 

[CruisinFJ60]

screwin around one day.

in these pics the front suspension is completly stock and the rear lifted..
my arm was in a cast when i did the lift and i ran out of time for the front...
took pics before work one day. front is now lifted but no wheeling pics yet....
either way it gives you a good idea how much she flexes up lifted all the way around.

I posted those before...

now that it is lifted all around, and springs broke in it is much better!
oh and in these pics, im limited by my shocks bottoming out.





and this one just cause i really like this pic of her.

 

[FJ60_cruiser]

here's my 60 with 2" springs and 3" rear shackles and I passed the OEM rear shackles and put it on front! oh and OME shocks and front sway bars! grettings from Venezuela!

 

[npears]

4" total

 

[Clutchee]

Thought I would jump in

2.5 BDS lift

 

[maat]

how do your rigs with no sway bars drive on the open road? i thought theyd be dangerous and handle like pigs?

 

[CruisinFJ60]

these trucks handle like pigs in the first place so i dont see the difference...

buddy of mine pulled his sway bars front and rear on his truck and drives it on the street with stock springs and longer shackles it leans pretty decent in the turns but nothing crazy.

my 60 with aftermarket springs isnt nearly as bad as his. and i have no sway bars (tho in the pics above they were still attached)

 

[IB14A69]

all stock.

 

[chappysfj40]

my 60, rubithon 2008

here is one of mine

 

[chappysfj40]

a couple more

 

[Trapper50cal]

I'm not sure there's enough gear in that truck...

 

[Carp]

Had an opportunity to put the truck on a ramp next to a 80 with 4" lift. Not too shabby for the SUA 60, if I do say so myself. The 80 is a little farther up, and both trucks are getting slightly tippy at this point.

 

[chappysfj40]

you should have saw us in 2000 on the rubicon in our 40, had the same amount of people but a smaller rig.. lololol to crazy to look back and see we took all that in a 40.

cheers

I'm not sure there's enough gear in that truck...

 

[uglyoinker]

my turn

I have a couple. One from moab. One from in front of my house on the testing rock. One from the testing dirt piles close to the shop I wrench in.

 

[uglyoinker]

One more

The last three are after a shackle reversal I scored off a parts cruiser.

 

[Trapper50cal]

Hells Revenge CM09

By trapper50cal, shot with E7600 at 2009-11-03

By trapper50cal, shot with E7600 at 2009-11-03

 

[IrollwithTojo]

Haven't seen you for a while trapper.

-Carl

 

[Trapper50cal]

Haven't seen you for a while trapper.

-Carl

I been lurkin....;p

 

[jeffsclan]

Dying to know.... what?

Ex

Dying to know what trail that was. I'm guessing its Kane Creek.