Steering Assembly

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Here is my problem. The stock tie rod is 42", the heavy duty rod I purchased is also this proper lenght. Now when I put in the new tie rod ends, I measured from the inner end of each and discovered its only 36"...that means when I thread the rod all the way on each side, then the tires are both angled out. Any ideas?
 
How long was the old steering rod?

Maybe somebody fubar-ed the stock knuckle arms to clearance some rims that did not really belong on the truck. That's exactly what Sacha's truck looked like when it came in last February: both knuckle arms heated and turned in, almost 3" per side to clear some IFS rims.:eek:

Maybe not what you wanted to hear.:frown:

Hth

Mark A.
 
Back
Top Bottom