Soa

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2004
Threads
43
Messages
209
Location
Ride in VA now in NOVA
Ok so after much debate Im thinking ill just go spring over and forgo the 4inch lift, seems to be the popular choice. My question is what springs should I use, my stockers are pretty bad and I think theres a good chance of breakage very soon. I could handle anything from 4 to 6 inches of lift by the time its done don’t want to go more than that though!
Thanks
Neal
 
Find Ya Another Set

of stock springs.
see how they set up,you may have to put a add-a-leaf in the pack.
i'm starting to collect all my stuff to do this to my 40.
got my front springs last night....thanx pablo cruise
got a drum front axle to practice my cut and turn(we'll see how that goes)
have plenty of extra d-shafts to modify

hope it all work out for you

i love my SOA 60
its time for the 40
 
I would try to find a set of good used stock springs. you will get better flex out of them and not much lift. by puting the springs on top of the axle you are lifting your truck a minimun of 5-6 inches. so if the springs are new you will get even more.

my .02 cents.

- Rico.
 
you headin to sc anytime soon?
i've got a couple extra sets layin around that i'm sure my landlord would love for me to get rid of....


malphrus
 
72cruiser said:
you headin to sc anytime soon?
i've got a couple extra sets layin around that i'm sure my landlord would love for me to get rid of....


malphrus
You giving these away? I need a set and drive from Bham to G'ville at least once a month.
 
I am considering going coil over instead of SOA. I am probably going to pay somebody to do it either way and I am wondering how much of price difference there is? Anyone have any idea? Cause I think it would be worth it.
 
2badfjs said:
thanx for the offer,i'm sure i can get a pair in colorado... ;)


well, the offer was to neal (in va), but it can be extended to everybody, hahaha

what's the goin rate for a solid set of used 40 springs? 75-100 bones?

i'll take $40....i would give em away, but i've got to fund my SOA, ha ha

i've only got one set available now, but should have a second in a week or two if y'all are interested....


malphrus
 
e-man said:
I am considering going coil over instead of SOA. I am probably going to pay somebody to do it either way and I am wondering how much of price difference there is? Anyone have any idea? Cause I think it would be worth it.

look at proffitscruisers page and youll get some ideas of price. let me know if you do do it im interested.
 
Yeah I have been eyeballing his site, but they are a bit of a haul for me.

There is a place local here called Sunray Engineering. I was thinking about asking them what they would charge. I saw a buggy they built in the hard core section and they appear to do really really good work.
 
I may have to make a special trip to SC... Ill have to look into that. There’s a couple of guys here and there in town that have some non running 40's and one wrecked that I know of. Considering the rust found on the east coast drive lines and suspensions are about all that survive, may be able to pick up a set locally.

How many sets you have lyin around Malphrus? (at the moment)
BTW any good disc golf courses around Clemson?

Peace
Neal
 
neal,
there are two great d.g. courses around here. one is in easley (abt 15min from clemson), the other is at winthrop university in rock hill, sc (abt 2.5 hours from clemson, but on your way from va).

the winthrop course hosts the world championships every couple years....it's hella long




abt the springs, i have one full set that is gettin pulled off my parts truck/frame this weekend.
those are guaranteed to be off the truck by sunday afternoon, and they are the only ones available for now.


shoot me an email if you'd like directions or think of anything else you need...


malphrus
jmalphr@clemson.edu
 
Back
Top Bottom