shoulder belts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 25, 2003
Threads
290
Messages
5,210
Location
Seattle, WA
I am looking to put some shoulder belts in my cruiser and was wondering what people thought about the ones that CCOT sells? Anyother setups you would recommed? Thanks.
 
i am interested too. i hope to swap some buckets for my bench soon...and id like some new awesome belts too...for safety and the coolness factor of course...mainly for safety tho.
(and coolness eheheh)
 
I have them and I like them. Attached to the roll bar.

Ed
 
I drilled a hole in the rollbar at what I thought was the "appropriate" height and welded the nut to the rollbar. The female part I mounted to the tub with a 4x4" backing plate and extended the attachment point with a piece of barstock. CCOT has "G" belts that are appropriately sensitive. I like 'em.
I'll see if I can get a pic.

Ed

Here you go... BTW, that is NOT Michael Jackson's glove...or O.J.'s
 
Last edited:
76BigheadFJ40 said:
Hey Degnol, what kind of seats are those. They look pretty slick man...

They are out of a Saturn. I got them for a couple of reasons...
1. They are not too wide, so the Tuffy fits well(6 1/2")
2. They were FREE and covered in my choice of material.

They also recline and the driver's side has a manually adjustable lumbar and seat height.


Ed
 
76BigheadFJ40 said:
cool. thanks man. leather?


Vinyl. Too practical.

Ed
 
I've had problems with my retractors locking up if not vertical (just about). Any time going up/down a hill, mine locked up. I bagged them and went with racing harnesses.
 
i've got them and work fine. no problems with the retractor. try and mount them as close to the seat as you can cuz i don't have much excess strap when buckled. my roll bar is farther back than stock, so it uses more strap than normal. a large guy would have a tuff time gettin' buckled in my rig.
 
bigndn said:
I've had problems with my retractors locking up if not vertical (just about). Any time going up/down a hill, mine locked up. I bagged them and went with racing harnesses.


True. I have the CCOT belts and my only complaint is that the inertia lock engages prematurely on downhill descents or rough roads. It's not a huge issue - I'm still confident that the belts work fine and are a good deal for the price. I've never had any adverse issues with them on the road.
 
good to hear that just about everyone likes them. Racing harness would be cool, but I don't have the provisions to mount them.
 
e rock said:
True. I have the CCOT belts and my only complaint is that the inertia lock engages prematurely on downhill descents or rough roads. It's not a huge issue - I'm still confident that the belts work fine and are a good deal for the price. I've never had any adverse issues with them on the road.


Good explanation and you're right........it's not a big problem, it's just annoying when I'm trying to reach my :beer: !!!!!!!! They work fine other than that! Good luck!!!!
 
I would rather have them lock at times I don't want........than not lock when they are NEEDED.

I am looking for more ideas for attaching to the roll bar. I have thought about the U-bolt, but don't think it would be strong enough. I though about a piece of steel strap wrapped around the bar with a bolt pinching the ends and holding the shoulder (prob doing this method)
 
A harnes looks cool but it is a real pain on a daily basis.

2087253_9_full.jpg
 
Back
Top Bottom