Shimmy/Shake Prob

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I had a buddie with the same problem, it ended up being the upper and lower bearings in the steering knuckles. Even though they torq ok, the bearing still could be bad letting the tires wobble.

Scott
 
Sounds like a caster prob more than anything.

My '74 is a bit of a rag (gets used and abused) and doesn't have the tightest TREs in the world but with the caster at 5° it drives great. I even have one bent wheel and a damaged tire out of round and still NO WOBBLES. If you are running 33s you need 4° caster angle.

Toe-in on mine is set at a hair more than 1/8".
 
I had castor shims 5 years ago, before I did the MAF shackle reversal. When I did the s/r I put the shims in, and the steering wandered all over the road. Took 'em out and everthing was fine. If the steering stabilizer doesn't work, then I'll try em. But to correct the castor, you're actually rotating the pinion down, right? See, I really don't like that idea. Would almost rather have knuckles rotated.
 
But the stock rotation is 1 degree down. 2 or 3 degrees more shouldn't be a problem.

Good luck. Keep us posted.

ps - That noise in the front of your steering gear box would have me worried.
 
Yeah, I don't know what the heck is up with that. The end cap of the box is some kind of thin metal, and when I was pushing and pulling on the pitman, the cap would pop like there was some kind of suction release, like when you twist the top off a Snapple. A guy I work with rebuilds Scout boxes, but he said the hardest thing to get is the bushings on the inside, sector shaft or something(?). Anyone know of a source, besides just another box?
 
"I remember the very first instance of this was the day after I finished my PS conversion."

Don't know where to get rebuild parts for a Scout box. I bought a Saginaw kit right off the shelf at NAPA. I guess I'm not surprised International parts are harder to find. If you absolutely hit a dead end, I could try and pull a Scout box from the salvage yard here and send it to you. What's a decent price for a used gear box?
 
RUSH55 said:
... I remember the very first instance of this was the day after I finished my PS conversion.

Hmm, given your description of the condition of the IH box when you got it, how it's been a problem with leakage/out of fluid, I'd be in a hurry to swap that box for a rebuilt unit from NAPA, if available.

How much is your frustration worth?

On the upside, your front end will be nearly new by the time you get to the end, if you continue replacing parts that aren't the problem.

When diagnosing any problem, there are three questions:

1. What do you know?

2. What don't you know?

3. What do you know that ain't necessarily so?

Oh, and pitch that steering damper in the ditch. It's like putting a bandaid on a cancer.

Good luck.

Kirk
 
Mystery of the Shakes........

I'm voting that the shaking problem is due to the steering box. I too, had a serious "death wobble" problem with everything as tight as a banjo string (so I thought). I increased my knuckle bearing preload...........and that really helped. Nonetheless, I could still feel the start of a death wobble problem in the steering wheel at times. Shortly after setting the knuckle bearing preload, I decided to convert to a AGR Steering box with a 20:1 ratio. Got that new box on and not even a hint of death wobble since.
 
Well, I ain't tossin anything in a ditch yet! The two main differences between my current setup and my stock setup is no steering stabilizer, and the Scout box. At twenty-five years old, I'm doubting the box can keep the 35" tires in line by itself. For that matter, how often do you see people driving around on tires 33" and bigger without a stabilizer? Lots of rigs run around with em, sometimes even two (though I'm sure mostly for show). If anything it should help, band-aid or not. If that doesn't work, it'll be something else....like this whole friggin escapade has been, a process of elimination.
At least I'll KNOW what I've done, and what I have'nt done. What I am thinking, is that if the stabilizer works, then the real fault lies in the box. Sound good? How about I go do this and find out?
Latre!~!
 
RUSH55 said:
Well...
add my name to the list of people who've cured death wobble with a steering stabilizer.
But I still have to attend to the box... it's leaking like a seive thru the front output seal.
So yes the stabilizer worked! HIP-HIP, HOORAY!!
You're a lucky SOB. Well, don't know if you're an SOB or not, but you are lucky. :D
 
Thanks Theo! At least I can get some positivity from someone!!
I can get a re-coned box thru Napa. I guess there are two types of later Scout boxes, one with a 3/4" input shaft diameter, and one with a 13/16" input shaft diameter. The 13/16" box is $208, and the 3/4" box is $235. I wasn't gonna go over $300, so everything's looking better. The core charge is $198!!! Holy croly!
 
RUSH55 said:
Thanks Theo! At least I can get some positivity from someone!!
!

I don't think that anyone is being negative; i'ts just experience and reality. When I first experienced wobble 25 years ago, the first thing I did was spring for a steering dampener. I also felt triumphant when I took it out for a ride and it didn't wobble at first. After the dampener, it only wobbled if I hit a bump. So when some of us say it is a band aid for a larger problem, it comes from experience, not spite.

Like Ahnold sez: "I'll be baaack"
 
RUSH55 said:
Thanks Theo! At least I can get some positivity from someone!!

My public apologies if I've come across as negative - certainly not my intent!

Having been through this before, it's frustrating to watch someone go through it again, denying the "best known methods" provided by the experienced. I most certainly allowed that to color my responses.

In particular [here I go again...], while the steering damper will *usually* do away with "death wobble" initially, as the steering box gets more and more worn (and wear will accelerate once you've reached the point your box is at), you will reach a point where either the damper will fail, or the intensity of the wobble will overcome the damper, and then you will be in a *real* world of hurt!

Better to fix the real problem ASAP, than to face an out of control vehicle because you "fixed" the wrong problem! :eek: :whoops: :eek:

I diagnose engineering problems (not with cars) professionally. When someone is paying over $200/hour for my time, being quick, through, and correct in diagnosis is prized.

Probably not appropriate credentials (or mindset) for a hobby forum ;) :beer: :beer:

Kirk
 
You have not 'fixed' anything...



I just like many others out here that have given you very solid advice have played with this very issue for years....




I would be willing to bet a lot of money that if you remove your stab., adjust your caster, yes, rotate your pinion down, (thick part of the shim to the front) that this will solve your issue, oh, and replace the damn steering box, and any other marginal components...




This is YOUR STEERING.....YOU are on PUBLIC roads....it is not just YOUR life in the balance...



Do not get all bent thinking that this is some personal attack...



Fix your junk!


Good luck!


-Steve
 
Dude, Steve, chill out! Like the sb-title of your user name, "WTF", as in, where the f**k are you coming from???? I really don't understand at what point I made a reply that I was being "attacked" by anyone. If my junk was unsafe to drive down the road, I wouldn't f-ing drive it, period. I haven't at all denied plausability of anyones Superman mechanic skills and problem diagnosis. And further, I don't understand how switching steering from manual to power, suddenly causes the castor to go out, but hey you could be right.
In any case, thanks for everyones help, I'll keep you all posted if there's anything worth mentioning
 
When you did your shackle reversal, which way did you install the shim? (the thick part was to the rear or the front?)


You just installed larger tires, correct?


What is the condition of the drag link end that attaches to the steering gear?


As Pin-head, and others have found, setting the proper caster is very crucial to making these vehicles go down the road strait. I have fought with this for a few years with my junk, low and behold, getting the caster nailed, made a world of difference...No one was going to convince me that it could be the issue...


Again man, no attack at you...I have just seen way too many people running marginal stuff on the road...it is really scary....


:beer:


-Steve
 
Back
Top Bottom