Shackle Hanger Flip Question

  • Thread starter Thread starter LT
  • Start date Start date

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2002
Threads
68
Messages
1,643
Location
Boring, OR
Website
www.cascadiaoffroad.com
Okay, I did my mandatory search but couldn't come up with what i'm looking for.

For those of you still using stock FJ40 springs in a SOA configuration and has done the shackle hanger flip. What is the eye to eye length of your shackle to achieve the 45 degree angle? Thanks.

LT
 
Is this on the rear? If it is you don't need to flip the shackle hanger for stock 4o springs. If you are planning to use 55 springs in the rear then a 4" to 6" eye to eye shackle will work when you flip the shackle hanger.
 
i just ordered proffits sr kit and they say the front hanger should be 1/4" back from the front of the frame and the holes for the shackle should be 42 inches measuring from the hanger
 
LT , it depends on if you are extending the frame horns or not and where you put the hangers in the front. IIRC with a 1.5 " extension and the factory fixed end hangers set flush with extension the center of hole thru frame rail is 42.25 - 42.75 from the center of tube in fixed mount. Or call Mudrak , he has all this s*** in his head.
 
I think I haven't worded this right. I am not doing a shackle reversal, I am still keeping the shackle in the front. I am taking the idea of what Woody originally did in the back with his shackle hanger to the front. All I am doing is taking out the rivets, flipping the hanger backwards and making a longer shackle.

Just trying to figure out shackle length. I guess i'll just start making random lengths and see what works best.
 
Back
Top Bottom