Scrues and nuts color

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 2, 2019
Threads
1
Messages
3
Location
Palm Beach Gardens
Hi guys, I'm looking the information about the nuts color (gold or silver) to make a restoration in an FJ40 1968 Colombian importation from Japan?
 
Yes, im try to know the color of: nuts, scrues, fasteners on the frame, couse I'm making this rest, but this an Colombian version year 1968 (fj40). Anybody know or where could I get it?
 
If you’re looking for what color code the nuts/bolts were on a 40, I don’t believe there was one. Most were just body color as they were painted after being installed.
If you’re looking for a source of nuts/bolts some vendor on here sell packs, @ToyotaMatt is one of them, MetercTLC is another one.
Otherwise, many just go to the pick-n-pull and remove whatever they can from other Toyota models.
Personally, I prefer to chase the threads and clean up the bolts as best I can before reassembly. But I’m not going for a show room floor look, just trying to keep it alive and rolling along.
 
Yes, im try to know the color of: nuts, scrues, fasteners on the frame, couse I'm making this rest, but this an Colombian version year 1968 (fj40). Anybody know or where could I get it?
My interpretation of your OP is that you would like to know the plating ("gold or silver") on your original fasteners. Back in 1968, it's my understanding it was likely a cadmium plating which is yellow in color. Cadmium was highly regarded due to it's properties of corrosion protection, 'lubricity', and that it was a good substrate for paint.

It's not widely available anymore, since the plating process involves hexavalent chromium, which is forbidden by "RoHS" industrial standards. (RoHS stands for Restriction of Hazardous Substances). OSHA identifies it as a hazard for people involved in the plating process.

While cad plating may still be available, a number of fastener suppliers offer zinc electroplate with yellow chromate, which may comply with RoHS if produced without the hexavalent chromium.

New OEM fasteners from Toyota appear to be mostly zinc electroplate with clear chromate, compliant with RoHS.
 
78738C15-4F62-492B-ADA7-A6CCA13AAB8A.jpeg
@Nicolay Here's a full kit offered by an iH8mud vendor.
 
I just grab all the hardware and yellow plate all the hardware. I'm not a purification kind of guy so I go with what I like. It makes for a very clean looking truck. From what I've seen on Mud, I believe the plater here in Nashville does the best job anywhere. I'm a regular customer and they tell me they get stuff shipped to them from all over the country.
IMG_2772.webp
 
Back
Top Bottom