Rust advice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2008
Threads
24
Messages
71
Location
Tampa, FL
No idea what to do, any advice is appreciated. Small superficial rust pocket forming where I can't get to it. There's a vertical support blocking it. I've never been too impressed with any of the rust converters/neutralizers but haven't tried many of them. I know if that if I don't act fast this will get bad quick down here in Tampa with the salt air. Thanks again for suggestions.
IMG_0029.webp
IMG_0030.webp
 
No idea what to do, any advice is appreciated. Small superficial rust pocket forming where I can't get to it. There's a vertical support blocking it. I've never been too impressed with any of the rust converters/neutralizers but haven't tried many of them. I know if that if I don't act fast this will get bad quick down here in Tampa with the salt air. Thanks again for suggestions.
View attachment 2254581View attachment 2254582


We’ve had good luck with CLR followed up by Boeshield. It will dry and doesn’t smell like sheep.
 
I kinda smell like a sheep, so I'm OK with that. Plus it will keep my wife and daughter away from the 40- two birds with one stone! All I want to do is stop that rust. Thanks again fellas.
 
Sorry to be a PIA, but how do you use the CLR? Dilute 1:1 then spray on and let it soak?
Thank again for you help.

Not being a PITA at all. @dlzadl has the process down. He’ll chime in shortly. If I remember correctly, he sprays the CLR, lets it sit for a few minutes and then rinses with water. Once the area is dry, the Boeshield goes on.
 
I had good luck with a 3 parts water to 1 part clr mix
Spray it on and use a blue scrubbie from the grocery store. The green ones are to harsh. After you give it a good scrub make sure to rinse well so it doesn’t leave a white residue.
If it is all paint and a flat surface you can wax it with a good carnauba wax. If it is next to a seam or next to metal or parts you can’t wax spray boeshield on it. Boeshield is safe on top of wax too. Boeshield is safe for plastics and great on metal. The only thing that removes boeshield is a pretty strong detergent. I sprayed boeshield on my Raw metal tie rod ends a year ago and they haven’t rusted. Boeshield will dry to a mat finish
 
A little history on Boeshield. Boeing, also known in Seattle as the lazy B was looking for a rust inhibitor for their metal castings that were stored outside in the northwest pacific. It had to be able to withstand the harsh salt air, because everything was large and had to be stored outside in the elements. It could not be solvent borne or toxic because of runoff . And it had to be easily removed to allow for later finishing. They could not find one so they developed it hence the name. It is a wax based water resistant finish That dries completely and can be easily removed with a strong detergent and reapplied easily. Safe on paint and plastic
 
I did this last summer and the scratches have not changed at all still protected

4883EB8A-5AA0-4200-A098-8E501CBCCD7A.webp
 
This site and more importantly the people that comprise it continue to amaze me with their knowledge and willingness to help. Thank you!
 
If CLR contains hydrochloric acid (and I could never find an ingredient list), then you really don't want to use it. It will clean great initially, but cause lots of problems later because of the hydrochloric. I have some of it, but it suspiciously smells like it has the afore mentioned acid.

I've had luck with Phosphoric acid, paper towels, and saran wrap. I get my phosphoric from a cleaning supply house that's 75%, then dilute at about a 5 water:1 acid, then soak a paper towel with it, place that on a verticle seam, then use the plastic to form a shield to keep it from drying out.

This will convert rust to Iron phosphate, a great paint surface. I blow-dry the piece before painting.
My two cents, for what they are worth.
 
POR 15 metal prep might be easier to get than straight iron phosphate and probably does the same thing. spray on for a few minutes, rinse well, and let dry. then you can spray the boeshield.
 
Back
Top Bottom