ROTW cc93cruiser

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 2, 2004
Threads
294
Messages
2,745
Location
Hayward, Ca.
I pm'd bad religion and asked him when I can show off my newly aquired cruiser and he told me just to post up my write up and post pics, so here we go.. I just purchased a mostly stock 1978 FJ40 from Denver, Colorado and had the cruiser shipped to me out to a terminal in the bay area. I waited and waited untill the day finally came when the cruiser was ready to be picked up....I was blown away by the condition of the cruiser. I knew I was getting a clean 40 by just seeing the pics that the owner sent me, but the cruiser exceeded my expectations! The cruiser is a original Texas 40, but had resided in Colorado for awhile now. The previous owner had even mentioned that he had never even driven the cruiser in the rain!:eek: ... So I was not worried about the snow factor in Denver causing rust... The cruiser only had 83,xxx original documented miles! The PO said along with not driving it under bad weather, he only put about 6000 miles on the cruiser since he bought it back in 2000....When I seen the pics and heard about all the details, I knew that my searching was over! Smogged her yesterday (CA Smog Test) with no probs!!!!!

Here are all the specs on the cruiser:

1978 FJ40 Land Cruiser
2F
4-Speed
Fr & Rr Diffs-4.11 Fine Spline Gears
Factory PTO Winch :bounce: :bounce: :bounce:
Optima Red Top
FR Disc Brakes
No Cats!!!!:flipoff2:
Mustard & White
BFG 33x9.5's on stock Powder Coated Rims and Factory Hubbies
2" Old Man Emu Lift kit
Alpine CD player

Future plans:
I have FR & RR ARB lockers, that I need to install.. I plan on taking the diffs apart and taking the 3rd members to a differential shop...It is probably going to be another month or so untill install my lockers :frown: ......
I will post some pics up in a bit.........
 
Here are a couple of driveway shots....I will post pics of the engine, and PTO later on.....
wjat1z.jpg


wjatev.jpg
 
Very nice Robert!

Congrats on the new rig!
 
purdy.
I have mixed feelings on installing an ARB on a rig that nice. On one side- an ARB will keep you out of trouble, helping body panels and such stay nice and virgin. On the other hand ARB's can be like the apple in the garden of eden. "Simple" mods start so innocently, and then you take a beautiful rig like that on the Rubicon and bang it to hell which leads to SOA, etc... You've got a special rig. Take care of it.

I live in Half Moon Bay (El Granada). Good to see some more Cruiser heads around. You'd dig the Coastal Get-together happening in June. http://www.pirate4x4.com/forum/showthread.php?t=458676&highlight=coastal

cheers-
Dustin
 
dustin said:
purdy.
I have mixed feelings on installing an ARB on a rig that nice. On one side- an ARB will keep you out of trouble, helping body panels and such stay nice and virgin. On the other hand ARB's can be like the apple in the garden of eden. "Simple" mods start so innocently, and then you take a beautiful rig like that on the Rubicon and bang it to hell which leads to SOA, etc... You've got a special rig. Take care of it.

I live in Half Moon Bay (El Granada). Good to see some more Cruiser heads around. You'd dig the Coastal Get-together happening in June. http://www.pirate4x4.com/forum/showthread.php?t=458676&highlight=coastal

cheers-
Dustin

Dustin, I can assure you that this cruiser is not going through no crazy stuff like the Rubicon trail or any other places that have a high percentage of getting body damage if you wheel there...I can also assure you that I wont be putting on no crazy SOA or a 6" extreme lift, I love the way she sits with the OME modest lift. The arb's are cool, I thought about not modding the 40 up at all, because I love having an all original rig, but the advantages of of having a locked 40 out way those of wheeling a rig without lockers. When you are out wheeling, even the simplest climbs, off camber spots, ruts etc.. can turn into problems when you have open differentials and you take a bad line then your prone to body damage...So the ARB's are like insurance for no body damage...This and the lift would seriously be my only mods I want on the cruiser....
 
deffinitely true. You'll keep it out of trouble alot easier with lockers, and go further easier. And, ARB are super nice and very high quality.

Very nice score on the rig. Lets see some more pics!

cheers!
Dustin
 
I just took a crap load of pics (interior shots and engine, along with misc.. ones)...Hope you guys enjoy, I candy for cruizer heads like me.....

Mine's the middle one:
wmffrd.jpg


wmfgc3.jpg


My lil cruiserhead:
wmfgqf.jpg


wmfia9.jpg


wmfiut.jpg


TEQ on the PTO:
wmfj42.jpg


Lever for the PTO:
wmfjgo.jpg


wmfjva.jpg


wmfldx.jpg


wmfll0.jpg


wmflsk.jpg


wmfm00.jpg


wmfm9v.jpg


wmfmlk.jpg


wmfmsx.jpg


wmfok8.jpg


wmfp00.jpg
 
a/t-33x9.5x15

m/t-33x10.5x16
 
Just finished DROOLING at the pics of your friggin FLEET of sweet cruisers!

WOW!

Some great rigs you have there!

 
Back
Top Bottom