Reducing noise?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I know there has been quite a few threads about this, but from what I've gathered not lots of results. From wind noise, road noise and what ever else, my cruiser is pretty loud inside the cab going down the road. Does anyone know of or had good results with anything to make the cabin any quieter? Read quite a few threads about people using dyna mat or something else and it not making much of a difference. Not going to spend a bunch of time to get minimal results.
Save yourself some time and buy a 100 or better yet, a 200! I love an 80 for what it is.
 
I stuffed the rear fenders with black foam pipe insulation from the hardware store, it seemed to help it was cheap and I can pull it out in the future it I want.
 
The weather stripping is my next step if this doesn't help.
The previous owner had pulled all the carpet. I put Peel n Seal from Lowe's down and then some thin reflective insulation. I bought a factory carpet set from a member here and it still had the factory insulation as well. This reduced most of my road noise other than worn tires. I also intend to spray inside the fender wells, too, at some point. Seems to have helped with floorboard heat, too. But, it made the wind noise more noticeable. It appears to be coming from the mirror area. I can't feel anything with my hand, so it's not making it completely inside.
 
It's a 90's vehicle, simple solution.... This is what I did and I can't hear any noise coming from the outside...

Step 1). Locate radio volume control
Step 2). Crank that sucker up till you can't hear the road noise

This solution solved my problem, also helps with those noisy passengers that sometimes like to ride with you...
 
Stock exhaust?

In my endless experience with old cars, I find that the exhaust has been fiddled with 100 times - often resulting in poor seals, and contact with the undercarriage.

I would venture a guess that the 3 main contributing factors to unpleasant cabin noise comes from tires, exhaust, and engine noise.
 
new window runs and door seals will help with the wind noise. I actually consider an 80 pretty quiet, considering some of the other vehicles I have owned :o
 
Save yourself some time and buy a 100 or better yet, a 200! I love an 80 for what it is.

I have a 200 but I'll never wheel it. I think my 80 is more rugged and with the solid front axle I can keep all 4 wheels on the ground in tricky situations. It can be the difference in rolling or not rolling.
 
Wind noise is my only problem, although I know the original post mentioned other noise. It's considerably quiet for what it is, and compared with other vehicles I've had. But, I know it could be much quieter. There's got to be a simple solution and I figure it's window runs and trim.
Turning up the radio works fine when I'm alone. But, my noisy passengers are the reason I need to quiet it down. I've got young twin sons riding in the back seat and I can't hardly hear a word they're saying. That may be good when they're older, but for now I want to hear what they have to say.
 
Owned a 1978 dodge ramcharger for 15 years prior to my firs 80 purchase in Jan 2014. It was a very reliable truck btw.
If you think the 80 presents a wind noise issue I have news for you. You could chop the rain gutters off. That'll quiet her down some. It's all relative I guess.
 
I sold an 83 Chevrolet dump truck shortly before I bought mine. I couldn't even hear to talk on the phone in it.
I've wondered if the design of the Windows may have something to do with the noise, but I may be way off. I'm certain my noise is coming from that area, though. I know the gaskets on the outer triangle are not sealing. I think I may try removing them and resealing them.
 
I didn't notice a great deal of improvement. It will take a little more driving to be sure though.

I did mine years ago. Probably should have mentioned that I was able to cover those rectangular holes while driving down the interstate and notice a difference. After doing this and confirming that covering the holes decreased the wind noise, I used the spray foam to seal the area. For any others looking at this, try covering the holes while driving to confirm the noise location first.
 
After looking at it closer, I realized I'm missing the inside window seal at the bottom of the window. It's the part that attaches to the door or door panel. I'm not sure how I overlooked it. It looks normal since it's completely gone. I folded up some newspaper and slid down into the crack between the window and door to test it. That did the trick. Now I've got to try to find a replacement. Is that type of trim vehicle specific, or can it be purchased in a generic of some sorts? I'm not even sure what it is called.
 
Vehicle specific. About $20 from friendly dealers:
image.webp
 
Back
Top Bottom