Reducing noise?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 13, 2010
Threads
31
Messages
157
Location
PA
I know there has been quite a few threads about this, but from what I've gathered not lots of results. From wind noise, road noise and what ever else, my cruiser is pretty loud inside the cab going down the road. Does anyone know of or had good results with anything to make the cabin any quieter? Read quite a few threads about people using dyna mat or something else and it not making much of a difference. Not going to spend a bunch of time to get minimal results.
 
Monstaliner on my entire exterior cut down on the noise quite a bit!
 
If you have 315 tires I'll guess they are a source of extra road noise because of a more aggressive tread pattern. Do you have a roof rack installed? Have you replaces all window runs, belting and door seals?
 
Last edited:
I know there has been quite a few threads about this, but from what I've gathered not lots of results. From wind noise, road noise and what ever else, my cruiser is pretty loud inside the cab going down the road. Does anyone know of or had good results with anything to make the cabin any quieter? Read quite a few threads about people using dyna mat or something else and it not making much of a difference. Not going to spend a bunch of time to get minimal results.
I have lined the entire floor of the LC with a similar dyna mat substance and it did reduce the interior noise significantly. But, I've been told by several individuals that I need to rubberize the inner wheel well as well with the 3M rubberized product. Theoretically, this will prevent a lot of noise from entering into the cab. I'm applying on Thursday, will send pic's and results.

Zona
 
I'd just like to kill the wind noise from around the mirrors area. But i'm still stock so guessing once I do real tires it's going to be a lot worse.
It's actually about the same with my m/t's once I pick up some speed. The wind is more prominent.
 
I have been considering monsterlining the whole truck. Not just for this reason, but thought it would help. Also was pondering replacing the door seals. Just didn't know how much it would help. Seems to me, most of the noise is coming from the back of the truck.
 
Dynamat or fatmat at least 50% of each surface that's making noise. Follow that up with a 2nd layer of sound absorbing padding, like: Dynamat.com | DynaPad for Car Audio Use

that should help.
 
I'd just like to kill the wind noise from around the mirrors area. But i'm still stock so guessing once I do real tires it's going to be a lot worse.

Agreed. This is a large source of wind noise in both 80s I own and probably most of them on the road. I spent a lot of time years ago trying different things to reduce this noise. One thing that did have a measurable improvement was spraying a small bit of spray-foam into the holes behind the black triangle. There is an exterior gasket at the mirror base, and the black interior triangle has foam that helps to seal out air in this triangle area. But with time, this gets weaker - the spray foam definitely helped. And it's not enough foam to affect removal, repair, etc down the road.
 
Which kit are you going with?

Well my plan is to do it in stages and see how it goes.
1st-Damplifier
2nd- Spectrum over it on the floor and spray the doors
3rd- Heat Wave Pro in the front floor/firewal to keep the heat out

4th MAYBE- New carpet
 
Agreed. This is a large source of wind noise in both 80s I own and probably most of them on the road. I spent a lot of time years ago trying different things to reduce this noise. One thing that did have a measurable improvement was spraying a small bit of spray-foam into the holes behind the black triangle. There is an exterior gasket at the mirror base, and the black interior triangle has foam that helps to seal out air in this triangle area. But with time, this gets weaker - the spray foam definitely helped. And it's not enough foam to affect removal, repair, etc down the road.

I know this is an older thread, but I'd like a little more information about this. Did you pop off the triangle from the inside? Does it just pop off?
I've tracked most of my wind noise down to the mirror area, so I thought I'd try this.
 
Do the window vent shades do anything for wind noise around the front windows? I'm hopefully going to Monstaliner my truck the end of next month as well but that is mostly to just get rid of the pealing clear coat.
 
I know this is an older thread, but I'd like a little more information about this. Did you pop off the triangle from the inside? Does it just pop off?
I've tracked most of my wind noise down to the mirror area, so I thought I'd try this.

I too would appreciate a little more info on this. On my cruiser the road noise is not bad but the wind noise is really annoying. I'm thinking I might have a bad seal around the windshield as that's where it seems it's coming from but I'm open to anything that might help.
 
I too would appreciate a little more info on this. On my cruiser the road noise is not bad but the wind noise is really annoying. I'm thinking I might have a bad seal around the windshield as that's where it seems it's coming from but I'm open to anything that might help.

It's as simple as pulling the black triangle plastic trim on the inside of the door. There is a 40%(!) chance the clips will break. Check for photos on here to see where the clips are located. The triangle trim is available new from the dealer if needed. Spray foam from the inside into the area behind the triangle - not down into the door cavity. It's a small amount.
 
I'd just like to kill the wind noise from around the mirrors area. But i'm still stock so guessing once I do real tires it's going to be a lot worse.

Agreed about the mirrors, mine whistle quite a bit. The plastic centre console is also a great sound amplifier, I padded mine and it helped. Oh, and engine noise, comes through the round rubber at the bottom of the steering column, it perishes and leaves gaps.

regards

Dave
 
I pulled the trim off and see two small rectangular holes at the bottom and one above the upper bolt. Are these where you sprayed? Did you fill the whole area or only part of it? I'll add a picture of the door with the trim off.

image.webp
 
Last edited:
I pulled the trim off and see two small rectangular holes at the bottom and one above the upper bolt. Are these where you sprayed? Did you fill the whole area or only part of it? I'll add a picture of the door with the trim off.

View attachment 1240613

Yep. I used the straw on the spray foam can angled up into those rectangular holes and tried to fill just the triangle area. Doesn't take much as it expands. That's it. Let us know the results for you.
 
I sprayed it in about an hour ago. A drop ran out and dropped down into the door but didn't look like it got on anything. I'll post back with the results.
 
Back
Top Bottom