Rear Drum Brakes Locking Up

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 1, 2007
Threads
6
Messages
28
Location
New Orleans, LA
I've searched all over the FAQ and used the search tool, but haven't found what I'm looking for...

I have a '75 FJ40 with stock rear drums and front disc brakes from a '76 FJ40. Under moderate to hard braking, the rear brakes want to lock up while the fronts work beautifully, especially the first few stops out of the driveway. Once I've driven around a bit it seems to get a little better, but it's never perfect. Any ideas on where to start looking to correct this?

Thanks!
 
I've searched all over the FAQ and used the search tool, but haven't found what I'm looking for...

I have a '75 FJ40 with stock rear drums and front disc brakes from a '76 FJ40. Under moderate to hard braking, the rear brakes want to lock up while the fronts work beautifully, especially the first few stops out of the driveway. Once I've driven around a bit it seems to get a little better, but it's never perfect. Any ideas on where to start looking to correct this?

Thanks!

Make sure you don't have a "pinched" line somewhere.
 
Sounds like the Brake Proportioning Valve in the Rear brake line is not working (or not there if discs not original).
 
I would also recommend checking your axle seals for leaks. Brake fluid can leak into the drum, gumming it up, causing things to stick. Look for wetness around the back of the drum.
 
I would also recommend checking your axle seals for leaks. Brake fluid can leak into the drum, gumming it up, causing things to stick. Look for wetness around the back of the drum.

X2:wrench:
 
There's no external sign of any fluid leaks around the drums... and of course the drums themselves don't want to come off easily for a closer inspection. I tried to back off the adjusters to let me get the drums off, but the adjusters don't want to move more than about 1/2 click each... could be another clue to my problem! I'm certainly no drum brake expert. Any more tips?
 
grabby?

not unusual for drum brakes to get a little grabby after sitting especially when wet or humid

if you do a few light stops they may clear up


if it is only under heavy braking like you said then I would look at the proportioning valve--you can get aftermarket adjustable ones

before I went that route though I would pull the drums and inspect everything to make sure I was not covering a problem
 
There's no external sign of any fluid leaks around the drums... and of course the drums themselves don't want to come off easily for a closer inspection. I tried to back off the adjusters to let me get the drums off, but the adjusters don't want to move more than about 1/2 click each... could be another clue to my problem! I'm certainly no drum brake expert. Any more tips?

I also had similar problem with the adjusters being very hard to turn. No outward signs of leaking, but when i finally got them off I saw that there was enough seepage past the seals mixed in with brake dust that caused them to stick. Might be the same case with yours.
 
clean em up and brake dust and whatnot makes em stick and drag a little bit. I took mine to Les Schwab and had them adjust my brakes for around $30-40. I've done it myself several times before but just didn't have the time to do it myself this round.
 
I have a similar problem. On mine where it sat for about 6 years or so the wheel cylinders all rusted solid. I pulled them off here at the shop and honed them out and cleaned them up real nice. It kinda worked for a lil while then it sat for about a month and rusted up again. Then on top of that I found a pin hole leak in one of the rear lines. So I found some brake line sitting around and bent new lines. I am going to order all new cylinders and just replace mine. If your adjusters won't move then they are probably rusted up. I would suggest getting new ones, new shoes, and drums turned. Then look into the proportioning valve if it still does it
 
I've searched all over the FAQ and used the search tool, but haven't found what I'm looking for...

I have a '75 FJ40 with stock rear drums and front disc brakes from a '76 FJ40. Under moderate to hard braking, the rear brakes want to lock up while the fronts work beautifully, especially the first few stops out of the driveway. Once I've driven around a bit it seems to get a little better, but it's never perfect. Any ideas on where to start looking to correct this?

Thanks!

Were you able to solve your issue? Just picked up my 1980 FJ a couple of days ago and have a similar issue where anything above medium braking locks the rears up. The fronts are disc brakes and the rears still drum. No proportioning valve installed or not one I can see.

IMG_9618.webp
 
Back
Top Bottom