Question on transfer case gears

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 12, 2007
Threads
28
Messages
419
Location
Huntsville, AL
Website
www.myspace.com
I'm looking to get lower gearing but I want to keep the ring gear and pinion at 4.11 because I'm already low enough on the highway.

Do you have to go with something like an Orion / Marlin Toybox / etc. or can you simply by some lower gears and install them in the transfer case?

Thanks!
Phil
 
I'm looking to get lower gearing but I want to keep the ring gear and pinion at 4.11 because I'm already low enough on the highway.

Do you have to go with something like an Orion / Marlin Toybox / etc. or can you simply by some lower gears and install them in the transfer case?

Thanks!
Phil
AFAIK you cannot re-gear the stock T-case. The Orion box is a modified stock t-case design which allows extra room for the larger gears required for lower ratios.
 
Split-cases have aftermarket 3.05 gears available, but not one-piece cases. Even if there were some available, when all was said and done, it probably wouldn't be much less than the Orion.
 
I'm looking to get lower gearing but I want to keep the ring gear and pinion at 4.11 because I'm already low enough on the highway.

Do you have to go with something like an Orion / Marlin Toybox / etc. or can you simply by some lower gears and install them in the transfer case?

Thanks!
Phil


I noticed you said "simply"

If you want simple stick with an Orion.
 
are there any new T-case gearing products since this thread was started? Looking to reduce rpms on high end in the 79' for road trips. I know there are new parts available now to change the ratio of T-case gearing in an 80 series...top and bottom
 
YOU CAN REGEAR THE STOCK BOX. Advanced Adapters sells a 4:1 gear set for the split case. It does require some modifications to the transfer case. You send it to AA, and they send it back modified with new gears.
 
are there any new T-case gearing products since this thread was started? Looking to reduce rpms on high end in the 79' for road trips. I know there are new parts available now to change the ratio of T-case gearing in an 80 series...top and bottom

Talk to @orangefj45 or @cruiseroutfit
 
are there any new T-case gearing products since this thread was started? Looking to reduce rpms on high end in the 79' for road trips. I know there are new parts available now to change the ratio of T-case gearing in an 80 series...top and bottom

For the split case, you bet!

3:1, 3.3:1, 4:1, as well as just 10% overdrive and underdrive options @ Cruiser Outfitters! Read about them here on Mud:
 
are there any new T-case gearing products since this thread was started? Looking to reduce rpms on high end in the 79' for road trips. I know there are new parts available now to change the ratio of T-case gearing in an 80 series...top and bottom

High range in the one-piece transfer case is just a 1:1 pass through. The gearing options for those cases are only for the low range - won't affect your highway rpm at all.
 
For the split case, you bet!

3:1, 3.3:1, 4:1, as well as just 10% overdrive and underdrive options @ Cruiser Outfitters! Read about them here on Mud:

But his '79 would have a one-piece case, would it not Kurt?
 
But his '79 would have a one-piece case, would it not Kurt?

Definitely would, unless it's been swapped or he's up for a swap. I missed the 1979 part. For the 1-pc case, you get the stock gear options or the 4:1 Orion, they don't even offer the 3:1 Orion anymore. So as long as you like 4:1, you're golden :D
 
Back
Top Bottom