out with the old, in with the, well, old...
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #706
Well, as luck would have it, i found another even "mintier" sunroof cover. Lol
After a solid ten years of service, I went ahead and treated the rig to new tail lamp covers. Thankfully im not driving an 80 and can still buy my plastics from the stealer
After a solid ten years of service, I went ahead and treated the rig to new tail lamp covers. Thankfully im not driving an 80 and can still buy my plastics from the stealer
Wow... Those lenses are broken like your Mom on prom night....
- Thread starter
- #708
Rescaled the truck recently.
I weighed 5650 on the way home from SD. That was mostly loaded.
Today i weighed with a half tank and my roof stuff(apprx 100lb) Me outside since i couldn't read the fücking display or get a decent pic from the driver seat.
split from SD was 2500/3000
Front.
Rear.
Total.
I weighed 5650 on the way home from SD. That was mostly loaded.
Today i weighed with a half tank and my roof stuff(apprx 100lb) Me outside since i couldn't read the fücking display or get a decent pic from the driver seat.
split from SD was 2500/3000Front.
Rear.
Total.
- Thread starter
- #711
Minutes mod. Cyclists be damned. Matt gave me a wild hair to actually work on my truck. 
pretty tight packaging. Added a relay to run these. Reds are 66W ea and yellows are 42W ea. I am going to make a short vid and try for some decibel numbers stock vs mod
pretty tight packaging. Added a relay to run these. Reds are 66W ea and yellows are 42W ea. I am going to make a short vid and try for some decibel numbers stock vs mod
Last edited:
- Thread starter
- #712
Did a minute mod to the roof rack. These are Thule square bars and rain gutter feet.
The bars had been working loose from the feet. The stock pinch bolts were inadequate. I through drilled the feet and one side of the bar. Then i added T-bolts into the bar and bolted and loctited together. New hardware is 8mm serrated head bolts.
The bars had been working loose from the feet. The stock pinch bolts were inadequate. I through drilled the feet and one side of the bar. Then i added T-bolts into the bar and bolted and loctited together. New hardware is 8mm serrated head bolts.
Last edited:
I like the square of the old Thule bars, easy to mount stuff to. Nice hidden nut!
Do you use the Thule gear on the T4R, and have a hardtop for it too?
— I bet I’m wrong but I never remember full length gutters on the fiberglass top, but I also thought the top removed up to the windshield frame
— I bet I’m wrong but I never remember full length gutters on the fiberglass top, but I also thought the top removed up to the windshield frame
T-licious