Old Man Emu Install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

JDNs78FJ40

SILVER Star
Joined
Dec 3, 2018
Threads
114
Messages
815
Location
Draper Utah
So I am mounting the old man emu suspension kit. The front was pretty easy. The rear is being a payment PITA!! I cannot get the fixed pin to line up on both sides. What am I doing wrong? I did mount the leaf springs to the axle housing and rolled it underneath. The rear shackles are installed.
F3D3F4A1-8A4C-420A-978C-6D5411606E4A.webp
 
Fixed end first! :slap:
 
I just installed one of these kits for a buddy. I installed the fixed end first, then the shackle end, then ran the spring up with a jack and set the spring pin in the perch. Took no time at all.
yep, EXACTLY! I learned the hard way, after much hammering, maneuvering, tossing empty beer cans, and several choice 4 letter words....Fixed end first, but don't torque down
 
Back
Top Bottom