Nevermind, got them now.
Official ONSC member buying/selling thread (2 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Just added some names of stuff for your pics.
sarca
I upped my wrenchin skills, now up yours!
ha! I told my huz that one item was a light for the dashboard...sometimes Im right!!
New Losi Comp Crawler
I built this Losi Comp Crawler about a year ago because MOA crawlers just aren't as cool. Everything is new, and I've got over $1200 in receipts (not counting the billet beadlocks and custom painted bodies) and all original boxes. I've got too many hobbies as it is, and this is not my only crawler. Its too nice to just let sit around, although it is a good conversation piece. You will not find a nicer, cleaner rc crawler...
Build sheet:
Losi 1/10th Comp crawler roller
Novak 3s brushless ESC (went w/ the Novak b/c it is designed for worm gears)
Brand new (1 battery through) Novak ballistic 21.5 turn crawler motor
14 and 15 tooth pinion gears
Factory front/rear dig transmission w/ Losi MSX12 dig servo
Hitec 7950 steering servo (402oz at 6v, 486oz at 7.4v)
Castle Creations BEC set at 6 volts
2 Holmes Hobbies 35c 1300mah 3s Lipo Batteries
Spektrum Dx3c 3ch Digital Radio
Spektrum SR300 receiver
2.2 Mayhem Engineering Competition Double Phatty Billet Beadlocks w/ live weights
Hot Bodies white dot Rover tires
Truck will come with 4 bodies...
stock lime green body for bashing or comps
New proline '72 Chevy c-10 painted black
Super rare proline bushwacker body (fj40 clone professionally painted and comp cut)
Nasty factory body painted by Bradley Fine Line Design (he paints all of Losi's factory race trucks and is extremely high dollar). Candy red w/ flames
If you are just getting into crawling, all you will need is a good lipo charger, and you are ready to beat the piss out of it.
$600 located 30min east of Charlotte
I built this Losi Comp Crawler about a year ago because MOA crawlers just aren't as cool. Everything is new, and I've got over $1200 in receipts (not counting the billet beadlocks and custom painted bodies) and all original boxes. I've got too many hobbies as it is, and this is not my only crawler. Its too nice to just let sit around, although it is a good conversation piece. You will not find a nicer, cleaner rc crawler...
Build sheet:
Losi 1/10th Comp crawler roller
Novak 3s brushless ESC (went w/ the Novak b/c it is designed for worm gears)
Brand new (1 battery through) Novak ballistic 21.5 turn crawler motor
14 and 15 tooth pinion gears
Factory front/rear dig transmission w/ Losi MSX12 dig servo
Hitec 7950 steering servo (402oz at 6v, 486oz at 7.4v)
Castle Creations BEC set at 6 volts
2 Holmes Hobbies 35c 1300mah 3s Lipo Batteries
Spektrum Dx3c 3ch Digital Radio
Spektrum SR300 receiver
2.2 Mayhem Engineering Competition Double Phatty Billet Beadlocks w/ live weights
Hot Bodies white dot Rover tires
Truck will come with 4 bodies...
stock lime green body for bashing or comps
New proline '72 Chevy c-10 painted black
Super rare proline bushwacker body (fj40 clone professionally painted and comp cut)
Nasty factory body painted by Bradley Fine Line Design (he paints all of Losi's factory race trucks and is extremely high dollar). Candy red w/ flames
If you are just getting into crawling, all you will need is a good lipo charger, and you are ready to beat the piss out of it.
$600 located 30min east of Charlotte
Last edited:
BenMara
Asian Redneck
1997 FZJ80 For sale $5000
Ok so its time to sell my 80 due to new baby. Selling this and my truck (2002 z71 silverado) to get down to one vehicle.
ONSC Price- $5,000
Specs.
1997 not Collector Edition
All black - no chrome hardware
Factory Locked Front and Rear- has always engaged quickly
Added Center Diff Switch
189,000 miles
Stock otherwise.
Things Ive done since I bought it in Dec. 2009
Front axle rebuild with new rotors and pads, marlin crawler seals
New denso wires, plugs, cap, rotor, factory air filter, factory oil filter
Replaced valve cover gasket and spark plug seals.
new factory belts.
New oil cap (dont ask)
ALL new 555 tie rod ends (needs alignment)
pioneer speakers (still sound crappy lol)
fan clutch rebuild
Things I know it needs
-hasnt been aligned since tie rods were replace.
-needs new ac clutch possibly new compressor. I was going to replace the enitre compressor and dryer with one from coolstreamac.com
-rear windshield washer diverter valve
Ive enjoyed this truck but just dont have time right now for club activities etc. Rarely drive it now. Never got a chance to build it up.....half the stuff i bought for it is now on Ramon and Emmas 80. Still have a frankies lift that will be for sale seperattly if anyone is intersted in it (will make a package price too). This is a solid truck, Ive driven to OBX, WV, and the beach several times. It has some scratches, some paint coming off the hood and the typical leather issues, tear on driver seat etc. There is a stain on the passenger carpet, but i have a pristine front carpet to replace it. I also have a set of good used bilstien shocks that I will throw in if someone doesnt want to lift it (came off joes rig).
Email me directly at jbarnes12 at aol dot com. I dont get on the board much anymore. Ill post it here through the end of the week before i put in on the main forum, craigslist etc.
Ok so its time to sell my 80 due to new baby. Selling this and my truck (2002 z71 silverado) to get down to one vehicle.
ONSC Price- $5,000
Specs.
1997 not Collector Edition
All black - no chrome hardware
Factory Locked Front and Rear- has always engaged quickly
Added Center Diff Switch
189,000 miles
Stock otherwise.
Things Ive done since I bought it in Dec. 2009
Front axle rebuild with new rotors and pads, marlin crawler seals
New denso wires, plugs, cap, rotor, factory air filter, factory oil filter
Replaced valve cover gasket and spark plug seals.
new factory belts.
New oil cap (dont ask)
ALL new 555 tie rod ends (needs alignment)
pioneer speakers (still sound crappy lol)
fan clutch rebuild
Things I know it needs
-hasnt been aligned since tie rods were replace.
-needs new ac clutch possibly new compressor. I was going to replace the enitre compressor and dryer with one from coolstreamac.com
-rear windshield washer diverter valve
Ive enjoyed this truck but just dont have time right now for club activities etc. Rarely drive it now. Never got a chance to build it up.....half the stuff i bought for it is now on Ramon and Emmas 80. Still have a frankies lift that will be for sale seperattly if anyone is intersted in it (will make a package price too). This is a solid truck, Ive driven to OBX, WV, and the beach several times. It has some scratches, some paint coming off the hood and the typical leather issues, tear on driver seat etc. There is a stain on the passenger carpet, but i have a pristine front carpet to replace it. I also have a set of good used bilstien shocks that I will throw in if someone doesnt want to lift it (came off joes rig).
Email me directly at jbarnes12 at aol dot com. I dont get on the board much anymore. Ill post it here through the end of the week before i put in on the main forum, craigslist etc.
Last edited:
Man, super sweet deal. Just a bit higher than what i got cash funds right now.
GLWS.
GLWS.
thanks Darin.feel free to pass it along if you know someone thats interested. Id love for someone in the club or a friend of someone in the club to buy it.
I know Adam on the coast said he knew some people looking for a cruiser, not sure of kind or year wanted, might want to hit him up.
Buddy has a m416 trailer for sale in havelock nc on craiglist. Its red and bed has been rhino lined. He is asking $1200.
http://eastnc.craigslist.org/rvd/3145720860.html
http://eastnc.craigslist.org/rvd/3145720860.html
Last edited:
Im also selling my 2005 white f250 diesel 4x4 with 160k on it. It is 6.0.
The truck is at my friends carlot in havelock. Tim Newton autosales.
http://www.autotrader.com/dealers/i...name=timnewtonautosales&ct=u&car_id=324612602
The truck is at my friends carlot in havelock. Tim Newton autosales.
http://www.autotrader.com/dealers/i...name=timnewtonautosales&ct=u&car_id=324612602
Last edited:
Damn... Just when I convinced myself to have no regrets over my recent trade...
https://forum.ih8mud.com/80-series-tech/603666-front-end-rebuild-cost.htmltrade.
Great looking truck, though!
https://forum.ih8mud.com/80-series-tech/603666-front-end-rebuild-cost.htmltrade.
Great looking truck, though!
Possibly a good deal if someone takes a look at the extent of the damage...
1993 Toyota Land Cruiser 4x4
1993 Toyota Land Cruiser 4x4
No, sorry... I should've quoted Barnes' post. Seeing a deal like that after making a bad trade is a bit painful.
◄ ◄1997 Toyota LandCruiser 171230 miles 6-Cylinder◄ ◄
Although a little high priced imo, anyone know the details on this unit?
Although a little high priced imo, anyone know the details on this unit?
I know nothing about it but can check it out if anyone wishes, its not too far from me...
https://forum.ih8mud.com/vehicles-t...4-sale-1985-bj60-savannah-ga.html#post7780147
For one of our club guys down here. The last post is mine as I just went and drove it.
Great deal for someone wanting a diesel.
For one of our club guys down here. The last post is mine as I just went and drove it.
Great deal for someone wanting a diesel.
jfz80
Cruisin’
yeah now quit bumping the thread 
