Official ONSC member buying/selling thread (9 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Originally a west coast vehicle, the truck is somewhat rust free, there are two very small spots above each rear window along the rain gutters, they are easily taken care of, and not bad at all. A little rot on the floor driver side not bad. Frame is good, no rot. Body is in pretty good shape, a few small dents and scratches,but nothing major, defiantly presentable for the age.
Has a 3b/h55f/bj60 (3b 3.4 4 cylinder diesel) 5 speed, but fifth is like over driver never need it on this truck. swap that runs great. The truck is a bit of a dog on the highway, but plenty of torque around town. A re-gear would be a great upgrade. starts in cold weather. I seem to average around 21 mpg in mixed driving.
The interior is hercu-lined is fading, and has Saab leather seats in the front (new driver seat on order at 4 wheel part store), they fit the truck perfect and are very comfortable. Rear seat is torn, but salvageable. Has a aftermarket CD player and upgraded speakers.
Other modifications include:
-NEW OME-Dakar 4" Lift(springs,shocks,shackles,steering stabilizer....)
- BFG A/T tires 33x10.50
-black steel wheels (With some rust)
-ARB bull bar bumper
-manual glow plug switch
-3" inch exhaust with flow-master muffler
-Grill/vents painted black
-HID's fogs
-Brand New Front Drive Shaft
-Brand New exhaust from header back
-New WARN Hubs
-New Clutch
-New radiator and thermostat
-New Fuel diaphragm
-New Manual window regulator
-New Glow plug relay
-New Block heater
-Winch does come with it not install nor am I sure it works
Probably more things that I am forgetting.
Tach is not working.
The odometer goes in and out like one day it works the next it wont its working now but the millage is wrong.
There is rust in the tail gate was going to buy a new one.
The car could use a new paint job.
The alternator has been giving me problems TOYOTA was being dumb and put the oil pump in the back of that so its not like you can go to auto zone and get a new one but still looking high and low. Just to let you know the oil pump part is fine its the alternator it self that is being a pain. Its not putting out the volts it need to be doing have replace the volt reg once.
Everything else works as far as i know.
!!NO TRADES PLEASE!! I am just putting this out there to see where the market is and may sell it. Email me.
jrmudder92@gmail.com
Facebook
Has a 3b/h55f/bj60 (3b 3.4 4 cylinder diesel) 5 speed, but fifth is like over driver never need it on this truck. swap that runs great. The truck is a bit of a dog on the highway, but plenty of torque around town. A re-gear would be a great upgrade. starts in cold weather. I seem to average around 21 mpg in mixed driving.
The interior is hercu-lined is fading, and has Saab leather seats in the front (new driver seat on order at 4 wheel part store), they fit the truck perfect and are very comfortable. Rear seat is torn, but salvageable. Has a aftermarket CD player and upgraded speakers.
Other modifications include:
-NEW OME-Dakar 4" Lift(springs,shocks,shackles,steering stabilizer....)
- BFG A/T tires 33x10.50
-black steel wheels (With some rust)
-ARB bull bar bumper
-manual glow plug switch
-3" inch exhaust with flow-master muffler
-Grill/vents painted black
-HID's fogs
-Brand New Front Drive Shaft
-Brand New exhaust from header back
-New WARN Hubs
-New Clutch
-New radiator and thermostat
-New Fuel diaphragm
-New Manual window regulator
-New Glow plug relay
-New Block heater
-Winch does come with it not install nor am I sure it works
Probably more things that I am forgetting.
Tach is not working.
The odometer goes in and out like one day it works the next it wont its working now but the millage is wrong.
There is rust in the tail gate was going to buy a new one.
The car could use a new paint job.
The alternator has been giving me problems TOYOTA was being dumb and put the oil pump in the back of that so its not like you can go to auto zone and get a new one but still looking high and low. Just to let you know the oil pump part is fine its the alternator it self that is being a pain. Its not putting out the volts it need to be doing have replace the volt reg once.
Everything else works as far as i know.
!!NO TRADES PLEASE!! I am just putting this out there to see where the market is and may sell it. Email me.
jrmudder92@gmail.com
jfz80
Cruisin’
sounds sweet.............what is it? 60 40? i know i know but some of us still dont do the facebook 
I have a friend in VA looking for a diesel cruiser..... got another pic I can share ?
I have a friend in VA looking for a diesel cruiser..... got another pic I can share ?
For those not on Facebook might want to mention it is a BJ60.
And got a price in mind ?
And got a price in mind ?
jfz80
Cruisin’
FREE WOOD 
I have 6 good trusses left from the gable roof of the iron pig pen aka garage/shed/leantoo
10' wide. I had them 2' on center for the 12 x 18 garage, some minor rot on the backside that never got vinyled
speak up or act fast but figured Id throw it out ther if anyone is considering building a chicken coop, planting shed, doghouse etc. I know its kinda far from the bulk of you but come and get it if you want it or its going to the curb. You can even use my trailer if you need. it is NOT PRESSURE TREATED is the biggest issue but a good roof and a subtructure of PT would get you several years. Obviously not for a long term project.
I have 6 good trusses left from the gable roof of the iron pig pen aka garage/shed/leantoo
10' wide. I had them 2' on center for the 12 x 18 garage, some minor rot on the backside that never got vinyled
speak up or act fast but figured Id throw it out ther if anyone is considering building a chicken coop, planting shed, doghouse etc. I know its kinda far from the bulk of you but come and get it if you want it or its going to the curb. You can even use my trailer if you need. it is NOT PRESSURE TREATED is the biggest issue but a good roof and a subtructure of PT would get you several years. Obviously not for a long term project.
Would anyone be able to go take a look at a motor for me in Iron Station ( northwest of Charlotte ) this week / weekend? There will be gas $ and / or beer provided as payment
Would anyone be able to go take a look at a motor for me in Iron Station ( northwest of Charlotte ) this week / weekend? There will be gas $ and / or beer provided as payment
maybe what is it
A 4BT. It's installed in a step van right now, but it runs ( supposedly well ) and drives.
Was hoping someone could evaluate the motor, drive it around the yard and take a video if it idling and revving. This is a potential new motor for Moonshine.
If not, then I'll have to make time the weekend after next to go out and see it. I was hoping someone could look at it before it got sold out from under me.
Last edited:
Yea it was a an fj but did it to a bj $6500
PM me info
Got a 40 series tube bumper ages ago when I was planning on getting one. Sat at my mom's in LA for the past 5 years... just got it over here.
Not sure what it is worth $200
Not sure what it is worth $200
sarca
I upped my wrenchin skills, now up yours!
WTT:Four 33.12.5x15's
I have 4 Mud King XT's, (note the closeup of one of the tires I cut on the rear wheel well) I want to trade them for skinnier tires (Id love to get 5 matching) 33.10.5x15's of similar or better wear. Its a weekend driver..no heavy trails (yet) - Im open to suggestions .. just remember 40 tires is a new subject for me.
My huz will be going to Sanford this Saturday from Jville and could bring them to trade if its not too far off of his path. [/ATTACH][/ATTACH]
I have 4 Mud King XT's, (note the closeup of one of the tires I cut on the rear wheel well) I want to trade them for skinnier tires (Id love to get 5 matching) 33.10.5x15's of similar or better wear. Its a weekend driver..no heavy trails (yet) - Im open to suggestions .. just remember 40 tires is a new subject for me.
My huz will be going to Sanford this Saturday from Jville and could bring them to trade if its not too far off of his path. [/ATTACH][/ATTACH]
jfz80
Cruisin’
looks like a good deal if anyone is looking for an 80. up near boone i presume
https://forum.ih8mud.com/vehicles-t...52-1993-fzj80-serviced-ome-suspension-nc.html
https://forum.ih8mud.com/vehicles-t...52-1993-fzj80-serviced-ome-suspension-nc.html
Looking for 80 series driver side mirror, green. Please PM me if you have one or know someone parting out.
sarca
I upped my wrenchin skills, now up yours!
Alrighty...here's a link to all the random pieces and parts the huz picked up for me..Most of it - I honestly dont know what it is...and if I did..I put it in the description (and if I wanted to keep it)
Things I 'need' or want for trade include stuff to do a power steering conversion..(Sorry I cant be more specific..)I also need a mechanical fuel pump. If there is something in the pics that you want let me know.
If you need a better pic, sent me a PM and tell me which pic and what you need to know.
Make an offer...Ill probably take it (be fair to the new girl!). . Not too keen on shipping.. but the better the offer, the more likely I will be to ship it - buyer pays!!
I live in Jacksonville NC and wanted to give ONSC members first dibs.
Things I 'need' or want for trade include stuff to do a power steering conversion..(Sorry I cant be more specific..)I also need a mechanical fuel pump. If there is something in the pics that you want let me know.
If you need a better pic, sent me a PM and tell me which pic and what you need to know.
Make an offer...Ill probably take it (be fair to the new girl!). . Not too keen on shipping.. but the better the offer, the more likely I will be to ship it - buyer pays!!
I live in Jacksonville NC and wanted to give ONSC members first dibs.
sarca
I upped my wrenchin skills, now up yours!
Last edited:
sarca
I upped my wrenchin skills, now up yours!
I didnt know you moonlighted as a comedian!
sarca
I upped my wrenchin skills, now up yours!
Thats a link to a driveshaft end.
Fixed it!
