Official For Sale/Trade/WTB/Free Thread
- Thread starter Devilmans Hand
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Had a guy back out of a Stainless 80 exhaust after it was built. I've got one in stock now in case anyone's been looking for one. I'll throw in free install 
1795.00 and it could be yours.
1795.00 and it could be yours.
Bumper is brown? It is just the skin. The metal was junk. The rack is missing one cross bar. I'll throw in the hitch, all for $75
Propane fire pit - Sports & Outdoors - Cumberland, Maryland - Marketplace | Facebook
You can be as cool as @Crusha!
Ok maybe not that cool but close.
Had a guy back out of a Stainless 80 exhaust after it was built. I've got one in stock now in case anyone's been looking for one. I'll throw in free install
That's pretty enough to justify rolling your 80, just to show it off.
35inchoverdrive
Forge Specialties
---SOLD---SOLD---SOLD---
3B Diesel w/ aftermarket turbo & power steering
H55 5spd Transmission
38mm splitcase
It came out of a running and driving 24v BJ75. It could push the truck on the highway at 60-65. The truck had just under 300k miles on it, but the turbo isn't stock, so I don't know when or what was done to the engine. I do not have compression numbers. The drivetrain has been stored indoors. I have a forklift onsite and the ability to load the drivetrain up on your trailer. I need it gone this week. Priced to sell at $2,500.
3B Diesel w/ aftermarket turbo & power steering
H55 5spd Transmission
38mm splitcase
It came out of a running and driving 24v BJ75. It could push the truck on the highway at 60-65. The truck had just under 300k miles on it, but the turbo isn't stock, so I don't know when or what was done to the engine. I do not have compression numbers. The drivetrain has been stored indoors. I have a forklift onsite and the ability to load the drivetrain up on your trailer. I need it gone this week. Priced to sell at $2,500.
Last edited:
Finished up all my big renovation projects and am contemplating selling my 2008 Tundra to get a smaller commuter for the city. If anyone is interested let me know. I've done all the major services and have the carfax from when I bought it. Not looking to make anything on it. I started to make it into a camping/expo type truck, but the reality is I have two other trucks and a decked out 60 series. I don't need to build anything else! haha. I honestly feel like this truck could go another 150,000 miles with no issues.
I paid a little over $16k for it this past fall, then put over $2-3k into it. I'll let it go for $17k if anyone is interested let me know.
2008 Toyota Tundra 5.7 4X4 SR5 Double Cab - cars & trucks - by owner - vehicle automotive sale
There is also a thread in the Tundra section on most of the stuff I've done to it.
I paid a little over $16k for it this past fall, then put over $2-3k into it. I'll let it go for $17k if anyone is interested let me know.
2008 Toyota Tundra 5.7 4X4 SR5 Double Cab - cars & trucks - by owner - vehicle automotive sale
There is also a thread in the Tundra section on most of the stuff I've done to it.
You won't have trouble selling that.
I hate to do it because I honestly feel like this is one of those trucks that will just keep going and going. I also know whatever I replace it with won't last like it will.
I'm looking for 3rd row seat brackets for an 80 if anyone wants to get rid of some. It's for a project idea I've accidentally cooked up.
Thanks, man. Sent you a PM.
Drawer for sale: $150
- Line-X coated
- Made from oak plywood
- Measurements: 36.75 in deep; 21.125 in wide; 11.00 in wide
- Heavy duty slides
- Locking T-handle
- Was mounted through bottom to 3rd row seat holes in my 100 series; could easily be modified to fit other series with 3rd row seats (80, 200, etc.)
- Located in 22655; near Winchester, VA
- Line-X coated
- Made from oak plywood
- Measurements: 36.75 in deep; 21.125 in wide; 11.00 in wide
- Heavy duty slides
- Locking T-handle
- Was mounted through bottom to 3rd row seat holes in my 100 series; could easily be modified to fit other series with 3rd row seats (80, 200, etc.)
- Located in 22655; near Winchester, VA
Drawer for sale: $150
- Line-X coated
- Made from oak plywood
- Measurements: 36.75 in deep; 21.125 in wide; 11.00 in wide
- Heavy duty slides
- Locking T-handle
- Was mounted through bottom to 3rd row seat holes in my 100 series; could easily be modified to fit other series with 3rd row seats (80, 200, etc.)
- Located in 22655; near Winchester, VA
If it helps a club member I can get it to NOVA.
But you can't get it to Coal Miner
Drawer for sale: $150
- Line-X coated
- Made from oak plywood
- Measurements: 36.75 in deep; 21.125 in wide; 11.00 in wide
- Heavy duty slides
- Locking T-handle
- Was mounted through bottom to 3rd row seat holes in my 100 series; could easily be modified to fit other series with 3rd row seats (80, 200, etc.)
- Located in 22655; near Winchester, VA
I'll take it if it can make it up to PA in July.
Jake - thanks for offering assistance with delivery. Much appreciated!