Not building boost pressure

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 6, 2014
Threads
59
Messages
363
Location
Colorado
Website
cannabisforcolorado.com
I finished putting on@Heckraiser turbo setup. TurboClunker (a.k.a. cheap-ass slaps a turbo on his LX)

I have not taken it for a drive yet but after letting her warm up it gave her some revs, could not hear the turbo at all.
at idle boost gauge is reading -20 at 4000rpm or so its -10.
Need ideas as to why im not building presure. Could it be the waste gate is stuck open?
20191108_142816.webp

20191108_145017.webp
 
Yep, gotta get that puppy out on the road and scare your neighbors :hillbilly:
 
Yep, gotta get that puppy out on the road and scare your neighbors :hillbilly:

You talking the house of junkies down the street, ill just wait until they get their fix and are out side yelling at things that are not there.
😉

It'll be hard/impossible to build much boost without the engine under load. Take it for a drive and report back.

I did put it into drive, step on the break and give her gas, didnt hear it spool up. Grated the exhaust is not done but one would think I should be able to hear it.
Tomorrow ill button up some things. and take her for a spin.

Anyone know of any "real" octane booster I can put in the tank? Its about 3/4 full of 85 octane.

Thanks
 
You’re gonna need to load it more than that. Like actually driving. You need a boost gauge in cab too, and an AFR gauge. I mean ideally anyway.

I’d hit it with the octane boost then fill the rest of the tank with vp or if you don’t have cats maybe 100ll. Just me though..???
 
You’re gonna need to load it more than that. Like actually driving. You need a boost gauge in cab too, and an AFR gauge. I mean ideally anyway.

I’d hit it with the octane boost then fill the rest of the tank with vp or if you don’t have cats maybe 100ll. Just me though..???

1 cat. Was Working on putting the boost gauge and the AFR gauge in the truck before it got to dark.
Is the 100II racing gas? One place on the other side of town sells it. But it's extremely expensive.
 
You talking the house of junkies down the street, ill just wait until they get their fix and are out side yelling at things that are not there.
😉



I did put it into drive, step on the break and give her gas, didnt hear it spool up. Grated the exhaust is not done but one would think I should be able to hear it.
Tomorrow ill button up some things. and take her for a spin.

Anyone know of any "real" octane booster I can put in the tank? Its about 3/4 full of 85 octane.

Thanks

Dude you need to drive it and get a load on it, and you may never hear it, get a MP3 audio and plug it in you stereo, and listen to the turbo sound
🤭
 
Ok thanks all, tomorrow I'll drive it.

Anyone recommend a octane booster?
 
So I took her for a short rip today. I can hear the turbo a little, however the boost seems to come on late. Gauge was telling me a bit more then 5lbs however I think the gauge is off so I think it is more then that.
When it comes on the truck fawking screams!!!!
Ill get the exhaust welded up tomorrow. Reducing it down to the stock exhaust. I want it quite.

Air to Fuel on wide open would go down to 10 and start to blink so I think we are running rich under load.

The BIG ISSUE is my oil return line is leaking. When I tapped it I ****ed up and it did not go in straight. When I put it in I did run black gasket maker but shes not holding.
Should I take it to the rim shop and see if they can run a bead around it?
20191109_151430.webp
 
I think I have the oil return line sealed up now, thank God.
Its building boost for sure! It looks like the oil catch has a plug in it, it lifted the dip stick out and sprayed oil all over the driver side of the engine.
20191110_123046.jpg

WOT 1st gear pull

AFR are good.

Did get a knock sensor error after I washed the oil off the engine
I have new Knock sensor from Toyota to replace them. Hope this fixes the issue.

Screenshot_20191110-131648_BlueDriver.webp



Short clip of a 1st gear pull, really I was making a turn and the turned on the camera.
 
jeeeeeezzzz she's screaming!
 
Back
Top Bottom