NM 98% rust free FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 24, 2014
Threads
45
Messages
222
Location
Las Cruces, NM
Wanted to get some opinions. Have an opportunity to purchase another Fj40. It’s has some good and some bad.

Pros:
Original motor in working condition
4 speed tranny
3 speed transfercase
Soft top frame
Con-ferr rear seat
Very little rust

Cons:
Converted doors to half doors
Need carburetor
Not original wheels

Please let me know what you all think.

02423BB1-EF11-42D2-A4CE-4C90A781919A.webp


0129CBFC-952F-4314-A9AF-6E9B746D4F1A.webp


5FE73FEC-1749-455D-9509-3ADC8CD444E6.webp


90177B41-0FD9-4D07-9EAF-C5491A387D34.webp


F0F1BF04-0B6B-4EA1-A8DD-A850BBC3CEB9.webp
 
I'm guessing that to be a 71'-73' and would venture to guess a value of $5k-$7k based on the pics and info provided. I would like to hear what others would say as well. Now if it was closer to Wisconsin I would tell you to run the other way as fast as possible, while I sneak over and buy it out from under you ;)
 
Your list of cons doesn’t mention rollover! The passenger quarter panel is a dead giveaway.
 
Your list of cons doesn’t mention rollover! The passenger quarter panel is a dead giveaway.
If that's the case do you think I am off on my value assessment?
 
That tarp isn't keeping much water off of the shift tower. Non-OEM roll bar, and soft top. Late '73 or '74 for the locking gas cap door. Antenna and a few details suggest seriously haphazard approaches. That is rattle can paint.

That is a decent price if it has a good frame and you can live with the bondo.
 
They are asking $3,000.

That might not be far off and depending on your plan for the truck could be a fair price...if it’s rust free. Would be a good start for a wheeler, slap some bud built qtrs over the rollover marks, etc.
 
Check to see if the rear spring shackles are hanging vertically. That would be an indicator of how hard the roll was.
 
I think at a minimum it's been laid on its side. The roll bar looks like it's made out of water pipe. You can see seams just b4 the bends. It's like they welded in elbows and ground the seams down.
 
Last weekend I spent time draining a pair of gear boxes that had water in them. I expected to see it in the transmission coming in from the shifter, but was surprised to see water in the transfercase. Because oil floats on water, the water at the bottom can't dry out.

Yes, the owner/seller might have duct tapped the tarp to the windshield to keep it clean in the garage, but...

Tarps are cheap, they sometimes free even. Here's a tech tip, double them up and replace them after a few months.

It looks like there is a crack in the front passenger corner of the hood.
 
Back
Top Bottom