New to me 97 LX450

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 2, 2013
Threads
10
Messages
42
Location
Spirit lake, ID
Just picked up this 97 lx450 today! Been looking for awhile for an 80 series and this one was posted this morning on Craigslist and I jumped all over it. Higher miles than I wanted 300k but condition is good other than rust in rear upper tailgate door and two small spots around front windshield and tow package. No rust under the vehicle. Has front and rear lockers and both engaged during test drive which is a plus since guy said he had never used them. Interior needs a good cleaning and needs tires in near future. It does have a couple leaks I need to figure out and fix. It drives better than 4 others I have test drove which were double the cost. I had a budget up to 7kish and got this for 3k so even if needs things fixed which I know it will no big deal. Anyone know where to look for the rear upper door?

4A81E3DE-88AC-45DB-B143-2699460D5763.webp


BD0EC445-7F60-4C3D-AC62-CE19570A9812.webp
 
man, replace that hatch you have a killer truck. 3K is a steal for one with lockers. i might even have a hatch in that color. whats the color code on the truck just so i can be sure. hard to see things on this crap computer screen on my desk at work.
 
Great deal, congrats! Oil leaks? Probably the valve cover gasket, distributor shaft o-ring, oil pump cover, and the crankshaft seal. Power steering lines are also prone to leaking. I'm doing the oil pump seal and crankshaft seal on my 97 LX this Sunday after my 300 ft lb torque wrench comes in Saturday.
 
Yeah oil leaks. Looks like mainly valve cover which then has went down over everything. I will replace that next week then will see from there what else I got going on.
 
Yeah oil leaks. Looks like mainly valve cover which then has went down over everything. I will replace that next week then will see from there what else I got going on.

When you do the valve cover gasket get the spark plug tube seals and do them at the same time. Check your heater valve (easy to get to with the valve cover off). Consider new spark plug wires if the old ones don't look like they've been replaced.
 
Thanks for the info in addition to valve gasket will for sure do that. Hitch is coming off tonight or tomorrow along with hitting the wheels with some paint. Slow95z thinks he has a hatch in correct color and is checking for me so hope that works out. Interior is also in dang near mint condition minus some dirt and dog hair and of course driver seat cracking but not bad.
 
ask arcteryx=CruiserYard here on MUD is he has a good rear panel
 
Well been looking this thing over and getting an idea of what needs to be done and so far so good!

Looks like on top of the list is valve cover, spark plug tube seals, distributor O-Ring, Crankcase seal and oil pump seal. Which the little I know are pretty much all the usual suspects to these with higher miles. All hoses look good but may just start replacing them just because. Had a clank in the front end that I was concerned with but turned out to be a loose bolt in bumper along with shock not installed properly.

Was also concerned with possible head gasket leak so decided to give the autozone block leak tester a go just because. The fluid didn’t change from blue so good there might still send some oil in to be tested but probably not and just run it and not worry about it.

Pretty excited about this rig and look forward to making it mine. Here’s some more pics and at this point I have not done any cleaning or detailing.

D3CB1E4E-A9C8-494F-86E0-1868F11BF4DA.webp


1A069C31-68BC-4768-9D42-2B6DE57D5C83.webp


C9E32983-F1D2-4F4C-929A-1F68E1D90121.webp


593F2A0E-AE3F-4B99-BA38-E37F51E91D7B.webp


8A814A44-03F7-4CFF-8F64-0C9379D6A7D5.webp
 
Well it has been busy working on trying to get it baselined along with some extras. Finally have it licensed and insured so I can enjoy it.

Things I have done so far:

Replaced a lug stud
Valve cover gasket
Spark plug seals
Heater valve and hoses
PHH replacement
Spark Plugs
Spark plug wires
Air filter - cleaned tuna can
PCV valve and grommet
Cleaned throttle body
Checked all brakes and they are pretty new
Dorkel (Just Cause)
Painted factory wheels
New tires
Ome springs since needed new tires still trying to determine what I am going to do for shocks.
Have trail gear bumper but have not painted it yet to install.

Next on the list is getting the oil pump gasket replaced but plan on enjoying it a bit before taking care of that.

F6E1454E-61E2-4DE1-9F21-0E990E799CBF.webp
 
Back
Top Bottom