New Member - Annapolis, MD

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 6, 2019
Threads
6
Messages
18
Location
Galway, NY
Good Day Mudders,

My name is Zack and I hail from Florida. Before I delve into my own story I’ll tell you about my truck, because let's be honest here, that’s all that most of us care about:

IMG_20200125_095142.jpg


Her name is the “Milano” and I purchased her for $6500 with 296,000 miles. She is a 1997 Land Cruiser, automatic transmission, 1FZ-FE and NO lockers. I wasn’t necessarily looking to get a Land Cruiser but after doing some research on capable overland vehicles I discovered these were the best and had to get one. When I was a teen I was interested in American muscle cars but now that I have more than a couple of speeding tickets under my belt I decided to slow down and get a practical vehicle. This was the first car I purchased and probably would have done it differently given what I know now but hey...you live and you learn.

Thankfully, the Milano hasn’t given me any issues since I purchased her in June of 2019 but she’s just been a weekend cruiser. Almost entirely stock with only a shady bush guard, cruddy running boards and an upgraded head unit (although the speakers are cardboard originals). Unfortunately I have been rather overwhelmed to approach all of the maintenance I know I should do. I've done some of the straightforward things like flush differentials (changed plugs), change oil and flush radiator. From scrolling through the forums I have a good idea of what other things to start on...Pesky heater hose, swap coolant hoses, flush brakes, do the thing with front bearings, make sure engine doesn’t overheat...but I’m a :banana: type of guy and don’t have the necessary knowledge or experience to approach some jobs

I’m still in my early 20’s, full time student and military and never got to work on cars with my old man. The real reason I’m finally posting to this forum is to hopefully look for someone who would be willing to spend a weekend afternoon helping me get familiarized with the car and some of the maintenance. I’d be willing to supply a couple of six packs of good craft beer, an MRE lunch and all of the tools and supplies. I have gained a huge amount of knowledge from this forum but I could really use a physical hand from someone in the area who is willing to help teach a young man how to do some of the harder tasks.
 
Last edited:
Head Gasket, Valve Cover Gasket, Water Pump, Radiator and Hose, Thermostat and Heater Control Valve all replaced by previous owner in <1 year:

00k0k_2WtAqEfbPVm_1200x900.jpg


General condition of undercarriage (would love to deburr and protect but don't know where to start):

IMG_5849.jpg

IMG_5850.jpg

IMG_5851.jpg

IMG_5852.jpg
 
Welcome to the forum!
Nice truck, you should be able to find some help on here. These trucks are easy to work on.
Just do a little at a time. Don’t get too sucked into replacing everything all at once. You should probably start with a coolant flush and a rust preventative treatment for the undercarriage. Both very easy.

Here are some links to great places to buy parts from people who you can personally contact on this website for assistance if you need it.

Cruiser outfitters
Wits end
 
You should download the Factory Service Manual. It should be available to download on Mud. It is an immense help. It breaks things down to simpler steps. Great way to eat an elephant a bite at a time. As many state, easy to work on. Start somewhere. Achieve small victories. Your confidence will grow. I have two boys 14 and 16. They work with me in cruisers and muscle cars. Best thing I did with them. I see you did not get that chance to do this. Hope you do when you have kids of your own. It is very empowering for them.
 
...a 1997 Land Cruiser, automatic transmission, 1FZ-FE and NO lockers...I discovered these were the best and had to get one.
Oh boy.

Welcome to the forum.
 
Congratulations! Grab the FSM as ^ said, you'll be glad you did. You've got the BEST color IMHO. You may want to consider taking out a loan to pay for all the cool stuff you'll want to do AFTER you baseline your cruiser. (Almost kidding there). If you were in Tampa we could head over to MacDill AFT and get you taken care of at the shop there. Maryland is a bit of a drive. You may want to look at the Clubhouse link and see if there is a local group that you can get connected with. I'm sure you'll find someone locally willing to give you a hand. Of course it might depend on which MRE's you have in stock ;) Congratulations!
 
It sounds like you are still in tight budget stage and that is ok. That grille guard is typically dangerous to have on a vehicle as just about any impact means it damages everything it covers. I would take it off, and try to sell it if you can find a buyer. Keep a close eye on the heater hoses and water hoses in general but don't get too caught up in doing it all at once like has been mentioned above. That rust under needs some attention, and there are some rust experts on here that can get you moving on that. There are tools that can help you deal with that easier. search for a few rust threads and you will find some good confidence around what you need to do. If you can't find anyone near you with a cruiser, you just need to get someone else to buy one who is close and then you have company.
 
Welcome and congrats on your new rig! Also welcome to the Land Cruiser obsession!

FSM X 100 - Lots of videos on YouTube for a lot of repairs. Texasknowhow and Otramm are two awesome guys to follow. With the right tools, FSM and this forum you can pretty much accomplish everything you need to do.
 
Thanks all for the welcomes and advice!

Don’t get too sucked into replacing everything all at once. You should probably start with a coolant flush and a rust preventative treatment for the undercarriage. Both very easy.

Yeah, I definitely get overwhelmed at the though of trying to baseline the car all at once. Doing a coolant flush this weekend and still collection info for the rust

Start somewhere. Achieve small victories. Your confidence will grow. I have two boys 14 and 16. They work with me in cruisers and muscle cars. Best thing I did with them. I see you did not get that chance to do this. Hope you do when you have kids of your own. It is very empowering for them.

Thanks for the advice! I'm definitely looking forward to passing on my love of car to my (future) kids.

If you were in Tampa we could head over to MacDill AFT and get you taken care of at the shop there. Maryland is a bit of a drive [...] Of course it might depend on which MRE's you have in stock ;) Congratulations!

Actually from the Tampa Bay area originally, so I'll be sure to reach out if I swing through! Most important thing is that I don't have any Veggie Crumbles...those are the worst.

That grille guard is typically dangerous to have on a vehicle as just about any impact means it damages everything it covers. [...] That rust under needs some attention, and there are some rust experts on here that can get you moving on that.

I have had similar thoughts so thanks for fortifying that opinion.

And thanks @DSRTRDR for the link!
 
Welcome! Looks like a good truck for $6500. Also looks like you have the power steering cooler "upgrade" similar to the Wit's End product. Make sure you have a good quality grease gun and grease those drive shafts with some moly-fortified grease (ex. Valvoline Palladium) as part of your baselining.
 
Good Day Mudders,

My name is Zack and I hail from Florida. Before I delve into my own story I’ll tell you about my truck, because let's be honest here, that’s all that most of us care about:

View attachment 2202013

Her name is the “Milano” and I purchased her for $6500 with 296,000 miles. She is a 1997 Land Cruiser, automatic transmission, 1FZ-FE and NO lockers. I wasn’t necessarily looking to get a Land Cruiser but after doing some research on capable overland vehicles I discovered these were the best and had to get one. When I was a teen I was interested in American muscle cars but now that I have more than a couple of speeding tickets under my belt I decided to slow down and get a practical vehicle. This was the first car I purchased and probably would have done it differently given what I know now but hey...you live and you learn.

Thankfully, the Milano hasn’t given me any issues since I purchased her in June of 2019 but she’s just been a weekend cruiser. Almost entirely stock with only a shady bush guard, cruddy running boards and an upgraded head unit (although the speakers are cardboard originals). Unfortunately I have been rather overwhelmed to approach all of the maintenance I know I should do. I've done some of the straightforward things like flush differentials (changed plugs), change oil and flush radiator. From scrolling through the forums I have a good idea of what other things to start on...Pesky heater hose, swap coolant hoses, flush brakes, do the thing with front bearings, make sure engine doesn’t overheat...but I’m a :banana: type of guy and don’t have the necessary knowledge or experience to approach some jobs

I’m still in my early 20’s, full time student and military and never got to work on cars with my old man. The real reason I’m finally posting to this forum is to hopefully look for someone who would be willing to spend a weekend afternoon helping me get familiarized with the car and some of the maintenance. I’d be willing to supply a couple of six packs of good craft beer, an MRE lunch and all of the tools and supplies. I have gained a huge amount of knowledge from this forum but I could really use a physical hand from someone in the area who is willing to help teach a young man how to do some of the harder tasks.


what up Zack ! , matt here ......

When you Venture into West Annapolis , hit me up ...........

" me shop " near the west Annapolis Public boat launch .......... :D




Screenshot_2019-06-21 VintageTEqParts com.webp



​
 
Back
Top Bottom