New FAQ Section- Engine Enhancement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Romer

fatherofdaughterofromer
Moderator
Joined
Sep 14, 2003
Threads
560
Messages
11,998
Location
Centennial, Colorado
We have added a new section on Engine Enhancements to include turbo and Super chargers.

We will move the turbo and super charger threads from other parts of the FAQ into this section. Like Georges install link.

Who would like to help us and write the super charger and how it works FAQ? It needs to be written at a High level, at least at first.

We can upload pictures to the site, so they can be embedded.


This could even be a collaborative section with people taking different parts.
 
Also, post up links of other threads or other sites that might be good there.
 
We have added a new section on Engine Enhancements to include turbo and Super chargers.

We will move the turbo and super charger threads from other parts of the FAQ into this section. Like Georges install link.

Who would like to help us and write the super charger and how it works FAQ? It needs to be written at a High level, at least at first.

We can upload pictures to the site, so they can be embedded.


This could even be a collaborative section with people taking different parts.

Romer,

Jim Reiss (Elmariachi) installed one on his former 97. He's been working a lot lately and hasn't kept up with the board much. You would probably get a positive response if you emailed him.

I would like to see other performance related stuff there, like injector flow, shaving the head, timing advance, exhaust mods, etc.

Robbie (powderpig) has done some porting and polishing that is pretty noteworthy, and effective.

You probably know more about these than I do, so I am sure I'm not telling you anything new. Just a reminder.

Great idea.

D
 
Good input. If you know of links, post them up and I'll add them.

I'll try and search some later, but probably not able to till this weekend.
 
Man this is a great idea.

Sure glad I thought of it.

edit: the above was written as a joke and in no way reflects how things are actually accomplished in 80's tech

To reiterate for the record Romer and I are a team and we work together as such.

Therefore the above is in no way inteneded to be taken seriously.
 
Last edited:
awesome stuuf I say call it modifications though instead of enhancements.....
 
Reffug, you're such a jerk. I can't believe you'd ride Romer like that - mocking a man who has nobody's interests in mind but ours! Grrr....

DougM

Disclaimer: This was written entirely as a joke, no insults intended and no animals were injured in the writing of this slur. All resemblance to persons real or fictional is unintended. For full copy of this disclaimer please go to shoveit.com.
 
Reffug, you're such a jerk. I can't believe you'd ride Romer like that - mocking a man who has nobody's interests in mind but ours! Grrr....

DougM

Disclaimer: This was written entirely as a joke, no insults intended and no animals were injured in the writing of this slur. All resemblance to persons real or fictional is unintended. For full copy of this disclaimer please go to shoveit.com.

I think we created a monster..

oh well.

I think your url is incorrect. Doug.

That would be kissmygrits.com, below the Mason-Dixon Line.
 
Now back to the original question.

If you have a link or thread we should post in this section put it here.
 
Maybe you can get that "water/methanol" guy to help out. He seems relatively literate:D

This doesn't single out the Landcruiser S/C but I learned alot from it:http://www.gadgetonline.com/Super.htm
 
Sorry Romer,

As you have no doubt surmised by now, I care nothing about my Land Cruiser, I just fart around on this site to work on my stand up material!

When I start doing Leno and Letterman you can say you knew me when..
 
supercharger/turbo flow enhancements.

You may want to clue people in on the benifits of extrudehone to the head/intake and possibley exhaust manifold.

This procedure hasnt been done in any threads that I have yet to see but properly done this does allow for a more consistant flow and increases volume.

I am going to be doing a rebuild on my 94 1FZFE and when the time comes I plan on having the head extrude honed as well as the intake an if there is enough metal the exhaust manifolds, I will post up the process/installation/and cost to do this as well as the CC #s of each intake runner before and after I have this procedure done.

good idea for the FAQ on this Romer, may cut down on redundant posts and add some tips and tricks to awakening the potential of this engine..... like the 700HP monsters in Saudi!!;)
 
i'm retarded, how do you get to this section so i can find out about getting a supercharger or turbo put on my TLC asap...
vr
hank
 
Back
Top Bottom