New Bolts-Yellow Zinc JIS (1 Viewer)

[woytovich]

I'd be interested in a half set (based on your list).

Am I right in understanding that the choice is between flanged or not for an otherwise identical "set" (minus flat washers maybe for the flanged set?) or is a "set" a mixture of flanged and non-flanged?

 

[davework]

Good Question, I'll include the flat washers with the flanged kit as well. I think they should be in there to provide a surface between the split lock and body.

And when I say a kit, it is either all hex or all flanged. I can do half and half though, or 1/3 and 2/3, doesn't matter to me. The price will be somewhere between the two then of course.

 

[WaAkFJ]

Can I switch to flanged since I already paid and your prices are now lower?

 

[woytovich]

Ok... Work me up a half kit that is about 2/3 non and 1/3 flanged. Let me know how you want to get paid and how much. It'll be shipping to zip 11731.
email me at mark@woytovich.com for fastest response.

THANKS FOR DOING THIS!!!

mark

 

[davework]

Just an FYI for all those looking for these bolts. I have requested that all the flanged bolts come indented, but have been told they cannot guarantee this. I'll let everyone know what the next order comes in like.

Just don't want to surprise anyone...

 

[davework]

Thanks for the response from everyone. It has been so good that I've gone ahead and placed another order. So if you are still looking for hardware, it will most likely not be ready to ship for 7-10 days from now. But please keep the orders & questions coming if you're interested.

 

[calfj60]

Sure, whatever you need. Just let me know what you want and I'll price it. Or maybe you just want 1/2 or 1/4 of the kit, in which case, just divide the price by that amount.

ok...can I get 12 M10's and 6 of each M8's?? flanged without nuts or washers please to 90245...thanks

 

[davework]

Paypal Website

Have some more hardware coming, hopefully there are some more out there who need this.

I've created a website to streamline the purchase process.
http://www.sailpowdercat.com/LCBolts.htm
You'll have two options:

1. Purchase Full Kits of Flanged, Regular, or Both
2. Purchase Partial Kits of Multiple Sizes and Mutliple Makeups of Flanged and Regular Hex

Hopefully it isn't overly complicated, I just thought this would be easier than sending PMs back and forth. But feel free to PM me if you'd rather.

I'll be shipping out the first batch tomorrow, you'll get shipping confirmations if yours has gone out.

Thanks again!

 

[davework]

Just got the word that the next bolt order will take 2-3 weeks to deliver, that would be 5/4-5/11.

Sorry for the delay, I will post more when they are in my hands, but feel free to PM with questions in the meantime.

 

[davework]

I am going to move this to the Storefront Section since I'd like to provide it as an ongoing resource.

Please feel free to PM me or Post on this Thread, I'll be sure and keep up with both.

 

[davework]

I think I have communicated with everyone individually, but just in case:

The next order of flanged bolts came in yesterday. However, they screwed up the regular hex head order and I have to wait another two weeks to get those. I apologize for the delay.

Some of the plating on the flanged was not that great (in my opinion), so I would also like to exchange these before sending them out to those that have ordered. I have to check the timeline on this.

I am working on Stainless still (just haven't had the time) and am also working on getting all the flanged heads indented.

Anyone have any feedback on the bolts that have gone out?

 

[Sloop Imports]

any updates?

 

[New2Cruiser]

Anybody have some feedback on the bolts yet? Very interested in an order if they are holding up as people are putting them in.
Thanks,
Case

 

[davework]

I haven't updated the website yet. But CAD plating has just increased in price to a flat $90 fee regardless of size. The plater just instituted a min. order of $80 + a $10 Hazmat Fee.

If I can run two orders together, I'd be happy to pass on the discount.

I have been very happy with the CAD plating. I have them plated at an aircraft parts shop and the guy does great work.

If anyone needs to have some plating done on anything other than bolts, let me know, I'd be happy to act as the middle man for no charge.

 

[thebigtarget]

Do you have pics of the CAD plated bolts?

 

[davework]

I haven't had the chance to get some up yet.

But take a look at Blueegg's post showing them here:
https://forum.ih8mud.com/40-55-series-tech/76927-nuts-bolts-9.html#post4741696

 

[New2Cruiser]

Got my CAD plated kit in last night. Looks good. I will try and post up some pics tonight.
Thanks David,
Case

 

[New2Cruiser]

CAD Plated Bolt Pics

Full Flanged CAD Plated Fasteners.


My Nifty New Fastener Storage.

 

[New2Cruiser]

Some Close Ups

Haven't gotten to put any of it to the test, but they look good. The plated looks pretty uniform. Will post up after the weekend when I get a wrench on a few.

Some M10 Cad Plated...



Some M8...

 

[Ambrew]

Don't suppose this is still going? I'm breaking a lot of bolts these days.