New and pulling the trigger on a '93

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 18, 2017
Threads
5
Messages
38
Location
Pennsylvania
Hello! Been reading here for the past few months trying to gather as much knowledge as I can. Short story is that my 2003 Durango, that I bought new is finally rusting away, needs brakes, rotors, and tranny lines. Time to donate it to charity. A friend (he dates my youngest daughter) was driving the '93 LC last year until his step-father put him into a hummer h2. Anyway, I know the vehicle a little but just got it to my garage to take a closer look. Paint is excellent for it's age and the only rust is at the rear of the rockers on both sides. Soft but not thru yet. I've been doing bodywork since I was 13, so I'm not worried about that.

It just came from the Toyota garage (dealership) and got a new steering intermediate shaft (u-joint), rear brakes, rotors and calipers. Runs like a top, shifts well and the interior is excellent as well. Now to the potential issues I've found: looks like the steering box is leaking. I've read a few threads on rebuilds and seems doable. The Birfield joints are leaky. Again, read some threads and a rebuild looks doable. Need to give the undercarriage a good cleaning and rust treatment, but exhaust and lines all look reasonable, and it will spend the rest of it's life with me garaged, maintained and cared for. Need a new antenna also.

it's a pretty basic model. 295K on the odometer. No roof rails, no lockers, cloth manual seats but abs, rear disks, tinted windows, and sun roof. Paying $4,500 for it. From what I've seen for prices, it's hard to tell, but I think it may be a little high, but also just had $600 at the dealership and I know this vehicle better than anyone I'd go look at. It's going to be a hunting/winter vehicle. I've never gotten my Durango stuck, so I don't believe I will challenge this vehicles abilities. Any thoughts, or other things I should check out before I transfer the title and pay? thanks and what a great resource!!!
 
Sounds like a great start.

Good luck and welcome!
 
I suppose the 'area' you live in and the number of cruisers to choose from (or lack of) is different than mine, but $4500.00 would definitely be high around here for that vehicle.

Also, I'd be looking for a 95-97 model.
 
The price is a bit high, but not outlandish. If the front axle had been done, then I'd say it's a pretty good value, but whatever. As long as you're happy with it, that's what counts.

And I'd stick to '93 or '94 since they have the aesthetically superior dash, cool curved buttons, and long-lived vinyl/plastic/whatever steering wheel. ;)
 
The price is a bit high, but not outlandish. If the front axle had been done, then I'd say it's a pretty good value, but whatever. As long as you're happy with it, that's what counts.

And I'd stick to '93 or '94 since they have the aesthetically superior dash, cool curved buttons, and long-lived vinyl/plastic/whatever steering wheel. ;)
Don't forget the venerable A442 transmission. The 93-94 are verified superior!
 
Thanks for the feedback. I will say after reading here, I was set on the '93-'94 version. (even if it was for the 'Toyota' on the grill ;)) Yeah in my area, western PA, I've seen (very few of) them relatively stock for $2,500-$10k for an early '90's LC in similar condition & miles. I'll pay a little premium to buy from someone I know for a vehicle that I have a little history on, but it could all blow up on the way home from the title transfer. I will put 2-3k a year on this, so if I can get 5 relatively cheap years (10-15k miles) it will be a win. If I do a little work and stretch a few more years out of it I'll be happy. Thanks again. I'll post some pics if anyone is interested once I figure out how :)

Wow - after reading thru the 'Buying another 80' thread, I'm feeling pretty good.
 
Last edited:
See if you can verify if the HG has ever been done. Hopefully, yes.

Seems slightly high, but if it just had a bunch of work and you know some history, I'd say go for it!

Good Luck!
 
'93-'94 master race! ;)

It seems like it's in the ballpark anyway as far as price goes.

Really though, you shouldn't have any trouble getting another 15K miles out of it, even if you don't do much beyond the axle job. I would be willing to wager it runs far longer than that though.
 
I paid a hair over 6k for my cruiser and flew to Texas to get it, because it was white and looked like it was in great shape. Does not have lockers and I am very happy with it. Wife approved too...

If you are happy with the rust and work you may need to put into it, that's all that matters.

Welcome to the community!
 
Price is relative. All that matters is that you are comfortable with it.

Whether you “overpaid” or not by $500-1000 is really one of the silliest things to concern yourself with. If you divide that $1000 by 5 years that breaks down to $200/year or $17/month. If $17/month is going to make a difference in your retirement then there are bigger issues to discuss.

I’ve never regretted what I’ve paid for any Land Cruiser. I’ve only regretted the ones I didn’t buy.

Congrats. Now post up some pics!
 
Welcome to the club. You might have paid a bit more than its worth but at least you know the history and didn't have to travel so its a wash. Let's see some photos!

Some random tips for first timers:

1. Search for answers before asking questions in the forum. Be polite and the favor will be returned. Avoid asking about what types oil, fuel or tires to use (10w40 8 quarts / regular / all 4 need to be the same size).
2. Keep it stock for at least a year and dial in all of the maintenance needs. Its way more capable than it appears in stock form.
3. The 93/94 vs 95/96/97 model year comparisons won't matter at this point. Both have their pros and cons.
4. See if there is a club in your area. Its fun to meet up other cruiser folks.
5. Don't expect anything better than 14mpg, actually expect about 12 and be happy if you get anything above that.
6. Its not a fast vehicle. Embrace the cruiser for what it is, not what it isn't. There are no secret ways to exploit untapped power.
7. The ECT button alters the transmission shift pattern so that it doesn't lock up the torque converter as early and makes the cruiser a bit more peppy around town. I leave my on all the time, some people don't, its a personal preference thing.
8. The power windows will be slow in cold weather (almost unusable in some instances). This can be fixed.
9. Keep a paperclip in the glove box. Reading the check engine light codes is done via the paperclip method.
10. Don't mess with the VAF (volume air flow meter) for any reason. Taking these apart will ruin them and you'll be screwed.
11. Check your owners manual for lug nut torque. On my 94' its 108 ft/lb. Tire shops will often have this number incorrect (low).
12. Check your knuckle studs (search this one).
13. Don't sweat the head gasket hysteria. If it happens deal with it, if not then don't stress it unless you are planning to spend significant time out of civilization.
14. You'll be spending a good amount time with the cruiser, if not driving it then tweaking with it or maintaining it.
 
Once you get the first snow over 6" you will appreciate it even more. Nothing like heading out and making fresh tracks in deep snow. Once you get it off-road for the first time you will amazed. Welcome to the forum.
 
IMG_2262.webp
IMG_2263.webp
IMG_2264.webp
IMG_2266.webp
IMG_2269.webp


Have the third row, just not installed.
 
Yet another well-preserved Emerald Pearl 80. It really is the best color, don't you think?

To keep it tech, what size/make are those wheels?
 
Back
Top Bottom