My cruiser is Dead..HElp

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
101
Messages
1,454
Location
The West
hi, i just baught my cruiser ( 1970 fj40 - 2f) recently and I have been driving it around and was going on a date with my bf and we had pulled in to the gas station to fill up and i tried to start it up and it wouldnt turn over just crank. Earlier I had been hearing noises on the passenger side of my truck like little rocks speckling on the side outside. But i didnt understand it I was on a very clean street. Not being very familiar with these trucks yet i pulled overon the side of the road to see maybe the hubs were unlocked (no) did i have something dragging making that sound( no). back to the gas station . there happened to be allens twoing people there picking someone up. He came over and suggested I lay my foot on the gas pedal because before I had been pumping it and he thought i might have flooded it and this was a good way to clean it out. We tried that and that didnt work. I tried starting in gear with the clutch of course down and even with it not in gear. so the twing guy , my bf and another guy at the gas station ended pushing me over to a parking space. Well , later that night after our date we decided to go over to the parking space and see if it was still there after taking my bfs camaro. We just for the heck of it opened up the hood ( we didnt do that before) lol and we were looking all around for the starter thinking that was the problem ( thats what he thought) and then i saw that the battery was never tied down and was wedged in between the frame and battery stand grounding itself to my truck. Then kevin ( my bf) tried pulling in back on the stand and then the positive side let out a spark witch resulted in a small wuick flame burning through what kevin thought was a vacuum hose. It ended up while i was driving before i got to the gas station the little pebbles sound on the side of my truck was the battery sparking in the rain whilke i was driving. That could have ended up all bad.So we ended up disconnecting the battery safely and the next day i replaced the battery , terminal and hooked it all back togetherand this time i tied it down. Then i tried to start it and it would crank but not turn over. so now i am asking for help. I wish i could post pics but i keep on trying and i cant. I have xp on my comp and dont know how to resize them. I really need help out there. I gotta get my baby out of that parking lot. Its been there for two nights and dont want to leave her there another night. Do i need another starter, does it have to do with that wire trailing up above the starter on the passenger side of the engine and it being burnt through. If it was a vacumm hose im sure it would start right up. But it might be the starte. WHere can i get one. How do i install it . Who can i trust ( not the local twoing company) to come down and help me. My friend has been woriking around jeep all his life should i get him or a professional. thanx for your help sorry for the long post.
 
Where are you located?If it cranks over but doesn't start try the check distributer cap also check all the wires to see if they are fitted snug on the cap and plugs.If your close by i'll give you a pull home or someplace safer than the petrol station. P.m. if you need my ass.
 
If the motor turns over then the starter is working. I would guess that you melted a fusable link (what you are describing as a vacuum hose). Look also at the fuse panel and see that all the fuses are good. Sounds like an electrical problem to me...

Good luck!
Nick Jennings
 
thanx guys. the reason i dont want to use a tow truck is that they are pricy and sloppy with cars especially trucks. Hey teapot , i live in Livermore ,ca. bay area.
 
Do you guys know ron diaz with custom cruiser fj40? thants my mechanic and i am sceduled to take my baby up there on monday tomarrow and i dont want to pay to tow my truck home and then to his shop. His shop is like 50 miles away from where i live. Its south of san jose.
 
I agree with the electrical prob/fusable link theory. You saw sparks, your battery was out of place, most likely electrical. One of my favorite sayings the old docs said in medical school, "If you hear hoofbeats, think horses not zebras." Translation: common things are the most likely problem.
 
Sounds like the Navy pastor who owned it before you wasn't very mechanically inclined. Always have your battery securely attached to your vehicle...a lead acid battery packs a lot of juice...short it out and nasty things happen. A guy recently set his BJ70 on fire here while wheeling with an unsecured battery. Luckily for him, he was able to fix most of the fire damage, although it cost him a lot of time and money.

My offer to host your pics is still open if you need me to...just shoot them to me in an email. Good luck.
 
Its probably the wire that was burned through. I'd think you could safely strip a section of wire off, and then hold it to the positive terminal.


(If you get big sparks, dont hook it up.) Be warned though, this may cause the starter to turn. Make SURE its out of gear.


There are very few wires on any vehical that are not hooked to the positive terminal in some way.


I dont think its your starter though. If the engine is spinning, the starter is doing its job.

Dave
 
Last edited:
A similar thing happened to me shortly after getting my '72: after an afternoon of wheeling just fine - some funny noise from the right hood side (there is a secondary breaker panel in my truck) - upon stopping to check it out and trying to re-start: dead. Turns out, several fuses were blown, some wires unconnected, some did not have ground, some were threaded bare from rubbing somewhere, weird splices everywhere - electrical gremlins. We were able to hunt down most of the problems one by one, including a loose grounding in a rear brake light, and it's been stable since. Good luck.
 
yeah just today my friend chris cools came over and started her right up. Then i stupidly got excited and drove it to another gas station to get it filled up with gas. I just wanted to drive it. So chris came down and changed the coil and also said it needed a new ignition system. He said just to replace all this stuff withg the an electronic ignition system because it is more reliable and it turns out that the coil was probably one of the original parts on the truck. it had absolutely no power in it.lol.well we ended up getting it towed. The guy that towed me had also towed another of my cars recently actually and he was pretty much making fun of my situation kinda making fun of the truck and how it isnt worth much. Kinda made me mad. But when you think about it for us toyota freaks out there its one less idiot that will buy a land cruiser - meaning theres not alot of land cruisers out there and basically people llike that arent going to buy any witch is good because they dont fully appreciate there uniqueness like very few of us land cruiser fans do. So i beleive that to each land cruiser lover out there there is a land cruiser waiting for them. sorry just ranting but this is like the only hobby that has ever meant so much to me and actually keeps showing me that these truly are the best vehicles out there ( of their kind).
 
okie, please, slow it down, use paragraphs. and ignore the knockers... if it's the car you like, it suits your life, then it's the best car ever...

my hj45 troopy is (was) my favorite car, hands down better than the fj40, reliability, driving wise, etc, but i still drive my 40 even when i get the chance to take the 45 out, why, cause it's got a couple of attitude problems, which i identify with. so start wrenching on your junk (not knocking your cruiser in particular, just a general term for these things), figure out your electrical gremlins, and soon you won't need towies and their stupid advice.
 
Brand new cars get towed too. Buy a towbar its like 150.00. Put a hitch on your camaro. At least you werent a hundred miles from town when it failed. If the pastor didnt secure the battery what else did he skip over, take it to a good shop and have them look it over before you start driving it all over. Keep some tools and spare fuses ,coil wire, plug wires,in your truck.
Triple A might be nice to have.
 
thanks guys. hey in you guys opinion what is the best electronic ignition system around for an fj40? and how can i get my hands on it soon? thanks.
 
okie said:
thanks guys. hey in you guys opinion what is the best electronic ignition system around for an fj40? and how can i get my hands on it soon? thanks.

Slow down!

Nothing wrong with a well maintained points ignition.

If you are at all mechanically inclined, I suggest going through your ignition piece by piece, and making sure everything is OK. The FSM is invaluable for this.

Otherwise, you're going to dump a lot of money into something you don't understand, and not necessarily have a well-running cruiser afterwards.

Welcome to the club, and it's nice to see the distaff side taking an interest...

Kirk

[Long, boring story: Many, many, many years ago, I used to drive a 1955 1/2 ton Chevy pickup around on the Navajo reservation in NE Arizona, a big, lonely place, as part of a job for the university where I provided my own transportation. I took that truck into places I'd hesitate to take a 4x4 today - youth is sometimes more optimistic than smart, I'm afraid.

Anyway, one afternoon, I was just over the hill from The Fricking Middle of Nowhere, and the truck just stopped running. Started the standard diagnostic - gas in the tank, yup, battery has power, yup, starter turns over, yup, spark to the plug NO!

Check connections, yup, all OK, pull the distributor cap...

Oh, crap, there's the rotor, in many tiny bakelite pieces. No spare, and 35 miles back to help through 100+ degree temperatures. Crap, crap, crap! No one knows where the hell I am, either. I've got plenty of water, some food, a gun, and a sleeping bag, so I'm in no danger, just inconvenienced.

So I start scrounging through the car, and, after about 20 minutes, find one of those giant pink erasers in the glove compartment, and a couple of big paper clips. Ten minutes later, I was back on the trail, headed back to Flagstaff. I fabbed a rotor out of the pink eraser and a couple of paper clips! Worked fine, no noticible difference from a standard rotor.

What's more, the local parts houses and the Chevy dealership didn't have a rotor in stock for a week, so I drove the truck with the booty fab rotor for another week, and then, when the replacement rotor (and the spare for the toolbox) came in, I continued to drive with the booty fab for another two weeks, when it finally burned up the paper clips, and brought me to a halt, again.

The old Chevy 235 was the direct inspiration for the original F engine, according to the lore. They sure are similar, right down to the firing order, 1-5-3-6-2-4. A wonderful, tough engine that people are too quick to replace, IMHO.]
 
Great story there largenfirm. The point okie needs to realize is that its learning about the truck that is the important thing. I can bring your story full circle.

I replaced the points in my 45dd with the electronic ignition [pertronix] and lo and behold, a couple of years later, the sucka dies on me. Just a few blocks from the shop, but still a nuisance. Well I still have the points system in a box under the driver's seat, so I pull it out and discover that the insulator block where the points terminal goes thru the side of the dizzy is shattered beyond use. So I look up and down the street in the gutter and end up picking out a cigarette butt, shoving it thru the hole in the dizzy, sticking the terminal bolt thru the butt and wiring the points up. Voila. :cheers:

Moral of the story: electronic ignition is NOT the answer. Learning how to work on your rig IS!
 
65swb45 said:
Great story there largenfirm.

Moral of the story: electronic ignition is NOT the answer. Learning how to work on your rig IS!

Thanks. And I couldn't agree more about learning the truck - that is vital to the care and feeding of an FJ40!

One other data point. My family's first cruiser was a red 74 FJ40 my father bought new. He wrenched and wrenched on that sucker (which ran fine when he got it).

Eventually, it would hardly work, thanks to all the "improvements" Dad put into it (carb, distributor, shackles, headers, etc.), including a new electronic distributor, which was the worst thing he did to it. Never could get it to run right, again, after that distributor went in, and Dad wouldn't admit he'd made a mistake...

The car was my Mom's daily driver, so he eventually, after a few years of her complaining about it, admitted he'd screwed the pooch, and traded it in on a new 82 FJ40.

Mom never let him work on that new FJ40 without a full review of what he was going to do, and why.

When I bought the 82 from her last year, the only modifications were a block heater in the lower radiator hose, necessary for Montana winters, and a couple of booty-fab repairs for things that had fallen off over the years.

It's out for a frame-off restoration right now, with the details in this thread:

https://forum.ih8mud.com/showthread.php?t=27733

Sometimes, we get so excited about "improving" our vehicles, we lose judgement as to whether our "improvement" is actually better!

Kirk
 
Okie,
Good to hear you got it out of the gas station and home, nothing worse than leaving a vehicle out in the open like that. Sorry i didn't get back to you sooner there was a 4runner down the street that was left overnight and some one was putting it on a trailer,looked suspicious but after talking to the kids i found out what the story was and totaly forgot about your situation.Give George(orange45) a p.m. he's a good guy and he knows what he's doing.
 
Back
Top Bottom