Muffler query

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 11, 2005
Threads
19
Messages
120
Location
NC
What kind of muffler are most guy's replacing with. I was thinking a dynomax or flowmaster but I thought maybe I could reduce some of the leg work and find out what is working for other guy's? :confused:
 
I have one and I'm not sure if I want to use it. I have the sor headers and I think they would be best with a aftermarket muffler
 
I'm runnin' the Borla 2 1/4" stainless muffler, MAF headers (ceramic coated) & stainless exhaust tubes I pieced together form JC Whitney. I'm waiting on a friend to add a stainless collector flange & weld on some stainless muffler tabs for mounting. I'll add a few pics once I receive my stuff back.........
 
thank-you pics would be appreciated
 
I guess I should add - because of my rear link suspension & upper crossmember, I cannot run my exhaust tubing out the back. It turns behind the tcase & goes up & exits out the pass side rear wheelwell, so it may not be what you're looking for.
 
im running maf ceramic coated headers with a 5100 series flowmaster, it sounds pretty nice its not to loud at idel but if i run it to the top of the gear it really turns some heads people think there is a 350 under the hood, they are shock to hear its the good old f motor. i ran 2 1/4 stainless steal tubing and tuck the flow high above the t case. i hook the cross member bracket up and then i cut the exhaust at a downward angle before the axle. i think it is the safest place to run it and protect it from getting mash up by rock and stuff. i m sure you would like how it rumbles down the street, on the highway and off the road. i felt that a exhaust tip is a waste of $$. since no one can see it unless it rolls over :doh:


good luck with what ever you go with :beer:

freddie
 
my opinion after having glass packs, then "quieter" flowmasters for 10 years is that loud is way overrated. Flowmasters sound neat, but if you do any kind of long distance driving, or drive with passengers, it is too loud. You have to yell at each other to hold a conversation. Also, my Flowmaster had two holes in it after 7 years. They are made kinda cheap. If you want a throaty muffler sound, spend the extra (not that much either) cash on a Borla or equivalent.
I am in the middle of a motor upgrade (4.3L v6 to 5.7L v8 ) and plan on running a Spintech muffler: http://www.spintechmufflers.com/spintech/spintechindex.asp.

-Dustin
 
I ditched the flowmaster on the sbc. I wanted quiet. Last thing I want to hear is tons of noise driving up a narrow canyon with the exhaust reverberating off the walls.

Flowmaster has a website with audio clips on their mufflers on cars.
 
I run a downey header with a 2-1/4 custom pipe inside the framerail, up around the side of the gas tank (remember it's a 79) and into a 40 series flowmaster, then a 2-1/2 inch tailpipe out the passenger side. It sounds really neat. Almost like a small block at idle up to around 2000rpm or so. Then it just sounds like something else i've never heard. Just sounds angry and mean. It's definately loud, but it's not my daily driver, and it's a soft top so it's loud anyway.
 
I've got a Flowmaster50 series that is fed from a sbc with a Y-pipe. 2.5" into and out of it, tucked inside the frame rail, then kicked out the driver's rear side. At idle, a deep throaty sound, but when driving around it is actually pretty quiet...So far, I like it. Been about 6 months...
muffline2S.webp
MufflineS.webp
 
1Fine40 said:
I've got a Flowmaster50 series that is fed from a sbc with a Y-pipe. 2.5" into and out of it, tucked inside the frame rail, then kicked out the driver's rear side. At idle, a deep throaty sound, but when driving around it is actually pretty quiet...So far, I like it. Been about 6 months...

that's what I've got. Don't find it loud at all off idle, very low drone at idle that is nice
 
Get a Cherry Bomb muffler, they're painted red. Idle is nice, and overall is quieter than most other no-backpressure mufflers, but when you light it up it sounds puurrrrrdy!! Plus they're fairly cheap!
 
if you wanna spend more money and not be a hick w/ a cherry bomb, get yerself a dynomax race bullet.....i have them...not on the crusah yet, but they are planned for my lightning
 
I went the cheap route. I bought a $24 dollar muffler at AP store and some 90s and 45s witha few straight pipes. Ended up costing me $43 dollars and worth every penny. THough I welded it together myself. I took off a Dynamax that the PO had trashed.
 
I should have welded that into the 40. But I probably still wouldn't be able to hear it with the top off.

"WHAT, WHAT DID YOU SAY? TURN MY HEADPHONES UP FOOL, YEAH!"
 
Back
Top Bottom