Mojave heater(finally)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

red66toy said:
Here is a pic of the glove box.
You can't plumb it to take in fresh air. It picks up air in the rear of the housing via two turbine fans with no provision for hooking up hosed for fresh air. I hope this doesn't affect the defroster setting. :)
I did not realize your truck was old skool, thought it had the other glove box :doh:

So the back of it looks like the old hang down AC units, 2 squirell cages on either side of the motor....
Butch
 
Texican said:
I did not realize your truck was old skool, thought it had the other glove box :doh:

So the back of it looks like the old hang down AC units, 2 squirell cages on either side of the motor....
Butch
Yeah like those. :)
 
red66toy said:
Here is a pic of the glove box.
You can't plumb it to take in fresh air. It picks up air in the rear of the housing via two turbine fans with no provision for hooking up hosed for fresh air. I hope this doesn't affect the defroster setting. :)

I would think that this would affect the defroster setting. Just because you need that fresh air to defog the window. I know that in my Corrola that if it is on recycled air it may blow harder but it fogs up the widow like a virgin on prom night.
 
HAHAHA, well i guess i could just open the kick vent then if i really cared, plus all the holes in the firewall let in air. :D
 
You don't have defrost ducts in your windshield frame do you. My 25 is like that. If you blast your heater in the rain, keep your door windows cracked about an inch on each side and your windshield glass won't fog up.
 
I just got some ducts to mount in the window frame, will they fit if my cruiser didn't originally come with a heater? Thanks for the cool tip. :D
 
First look under your dash to see if you have the bottom half of the defrost ducts. My '65LV has no heat, yet it has defrost ducts. The FJ40 defrost ducts are a two piece. Bottom part behind your dash, and top part matches directly above in your windshield frame so that your windshield can fold down. If you've got the bottom part, I'd just find an early windshield frame with factory ducts. Seems to me like it would be a lot less work. Find yourself an early 40 with factory defrost and check it out. It will explain what you're up against a lot better than this post. Good luck.
 
Thanks, I will try and find some pics of a early defroster set up. :)

This what you talking about? This is what I have right now.
 
Last edited:
That's a different style than mine (mine was originally '75), but that looks like the earlier top half. I'll bet the tube slides right into the bottom duct.
 
Chase, Can that heating unit be turned upside down so that the defrost nozzle is on the right side? I was looking at my LV today and that unit looks like it will fit right in the center of my dash, but the defrost ducts are on the right side.
 
You can't turn the whole heating unit upside down, but you can turn the defroster plenum that clips to the front upside down and that would solve your problem. :)
 
For those of you not interested in replacing the heater assembly; I've got a part# for a different motor that you can mount in place of the old motor. I'll have to rumage through some old notes but I should be able to find it in a few days. I think the motor was intended for a Dodge of some sort; made a world of difference as for more heat in my '68 FJ-40.
 
red66toy said:
Here is a pic of the glove box.
You can't plumb it to take in fresh air. It picks up air in the rear of the housing via two turbine fans with no provision for hooking up hosed for fresh air. I hope this doesn't affect the defroster setting. :)
So how well does it defrost?
 
red66, post more pics, that is a beautiful rig!!!
 
Ponce said:
So how well does it defrost?

I dont know why I remembered this thread all of a sudden but I finally got the defroster all hooked up at the end of the summer. The defroster works great. There are a couple of leaks where the air duct connects to the defroster guides that I have to fix. Sorry for the ultra late reply. :doh:
 
Back
Top Bottom