Mixing & Matching ....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2006
Threads
123
Messages
1,108
Location
Central Cali
I am going to do the power steering conversion on my 77fj, i have done some reading on both types, saginaw vs mini truck. can i say mix parts for this conversion ? or do i need to stay with all mini truck and or all saginaw/chevy. ? can i like get the power steering plate from jt outfitters and the mount the saginaw gear box to it ? then get other parts for the completion ? i also have the chevy pump. can this also be used ? the mini truck conversion seems to be alot easier and i do not own or have a welder so i want to do this as simple as possible. i will be only running 33's so i believe the mini truck conversion will be best. also i already have the saginaw gear box and pump and i am having a he$$ of a time finding a mini gear box that's not like $500. i have checked with my junk yards and cannot find one.


Thanks in advance for any advice ... :)
 
NO you definatly cannot install a saginaw gearbox using a minitruck mounting plate.

Buy the brackets to mount your chevy pump to your engine, and the brackets for a minitruck box, and install that.

Minitruck is fine for 33's.

Saginaw is better, when done correctly.

I just sold a good minitruck box for $90. Keep your eyes open. You may be confusing FJ40 P/S boxes for minitruck boxes. I would never pay more than $100 for a minitruck box.
 
Yes, you can mix and match. Many run a Saginaw pump and a mintruck box. Since you already have the pump and box that would be the cheap way to go. Buy the scabplate; I would buy from a fellow mudder and skip JT Outfitters. Either have a buddy with a welder install the plate or take it to a welder shop and have them do it. The rest is pretty much bolt on with the exception of the steering column linkage.
 
CruisinGA said:
Buy the brackets to mount your chevy pump to your engine, and the brackets for a minitruck box, and install that.
So a GM pump is OK for a minitruck gear box (similar pressure and volume requirements)??
 
run saginaw. and forget about jt, cal kurt at cruiseroutfitters he'll set you straight and get you what you need cheap
 
John Smith said:
Yes, you can mix and match. Many run a Saginaw pump and a mintruck box. Since you already have the pump and box that would be the cheap way to go.

He was talking about mixing and matching a minitruck BOX bracket with saginaw steering box. Not very feasible nor safe.
 
So it sounds like all one way or the other huh ? i will call curt and see what his advice is also ..

Thanks ,,, :cheers:
 
Back
Top Bottom