Metal tech cage install - almost done

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 9, 2004
Threads
266
Messages
3,633
Location
Cool Comfy AZ
Almost all done with the cage. Just need to drill 2 more mounting holes (1 each) for the A-pillar bar floor mount and finish painting it. Haven't had time to clean it up since last weekend's trip to Sunflower Mine...

I installed Mark's stinger kit too...

attachment.php


Stinger mount detail... looks like no Saginaw for me..

attachment.php


Front frame tie-in detail...

attachment.php


Again...

attachment.php


A-pillar floor mount:

attachment.php


Bend in A-pillar to clear the dash and the handles:

attachment.php


btw Mark's stuff is great... very easy to work with and communicate, even sent detailed CAD drawing to make it easier to install (Mark I would suggest including this with each kit) and a FREE :D copy of Toyota Trails!!

More later stay tuned...
 
More pics...

Upper bars and middle bars above the seats:

attachment.php


Rear frame lower tie-in:

attachment.php


Rear frame Upper tie-in:

attachment.php
 
Still more pics...

Tub mount, rear, passenger side...

attachment.php


Tub mount, front, passenger side:

attachment.php


Overall side shot, in the garage so poor quality but you get the idea...

attachment.php
 
More cage pics

Stinger front...

attachment.php


Another stinger shot...

attachment.php


Side brace:

attachment.php
 
The last 2 pics...

attachment.php


attachment.php


Yes I know I need a spare carrier - Hi Lift mount. Mark are you listening???
 
Thanks. Good luck! Post pics when you're done.
 
I don't really know. A few days. We were off and on with the install over a few weeks time. A few hours here, a few hours there. Figure maybe 12-15 hours total but that included fitting the tubes, installing the stinger, figuring out the frame ties, etc...
 
Try clicking the banner at the top of the page!
 
i know im a retard as soon as i finished posting i found it. thanks rook
 
usmcruiser said:
why wouldent you be able to do a saginaw steering conversion? The link didn't work but I am pretty sure that Mark designed it so you could.

Well just look at the room I (don't) have... I'd really rather go with a Toyota power steering setup anyway.
 
Back
Top Bottom