Main Harness - Broken Plug

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2014
Threads
18
Messages
158
Location
Winona, Mississippi
1997 LX450 main engine wiring harness. When we disconnected the plug from the sensor, the locking clip broke off. Is there a way to buy a replacement plug for the harness?
 
Sometimes. Which clip? Look for a 5 digit number on the housing. Depending on which it is, some of us have spares.
 
in principle, yes, plugs are still available from Toyota

specifically: you did not state what plug you pulled, so how are we supposed to know :rolleyes:
 
There is a part number on the plug which can be a bitch to read sometimes. I had to replace a few on my engine harness and @beno hooked me up.
 
The number on the plug can be hard to find. A parts person told me to look on the inside lip where the wires come in to the housing.
 
Buy new plug or put little rtv on the plug surface and stick together
 
IMG_3996.webp
IMG_3993.webp
IMG_3992.webp
Here are pics of the plug. Attached to side of throttle body. Saw no number.
 
You either need to denim and get new sensor or stick them with rtv which will hold them fine, go to toyotA till them plugs ya need
 
11144 P4

Here is a picture of an injector harness with the pen pointing to its housing number. You will need to be persistent as some dealers tell you they are not available.

IMG_2044.webp
 
Buy some 'Rescue Tape'...some Ace Hardware Stores carry it...or the same stuff from Duluth Trading Company, they call it Extreme Tape. Perfect for this type of repair.

Will last as long as you want it to, or until you purchase the proper connection.

John
 
Last edited:
Back
Top Bottom