Locker Question...& Locking Hubs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2005
Threads
60
Messages
328
Location
West Frankfort Illinois
Hi,
I am failry new to the 4WD scene. I have had and rebuilt many old Fords, Mustangs, Torinos mainly. I understand the Rear end of the Ford 9" enough to add a detroit locker to one. HOWEVER, I do not understand the front axle on my Cruiser completely. I know tht the locking hubs allow the wheels to "freewheel" and then lock to the axle with a simple twist. What I don't know is, is the diff. still considered "open"?? If I have locking hubs, and I ahve them in the "lock" position, does the front end now act like a spool or an open?
Mike
 
the front end is just like any normal ring-pinion...open. locking the hubs only connects hub/spindle to the front axle shafts.
 
the hubs simply connect the wheels to the axle shafts. If you pull a hub off you will understand right away. Are you familiar with full floating axles? Yes the diff is open in stock form, (no locker)

edit: wow I guess i'm slow :)
 
Thanks for the fast replys....wow!

That is what I thought, but I figure questions are free.....;)

Since I am doing a Disk Brake conversion right now, This might be a good time to go ahead and put in a locker/limited slip. I'm off to the search feature to find info on lockers!!

Thanks guys...I love this forum.:cheers:

Mike
 
yes that was my mistake, i had the axle gutted and should have installed a locker while i was in there, now if i want one in there i got to tear it apart, doh!!
 
I'll go ahead and add my opinion here-

To steal Woody's line, limited slips are just "limited"

If budget is a concern, run an aussie locker.

If it is not, run an ARB air locker.

I run an EZ locker in the front, it works fine on the trail, but the 2nd time out with it I broke my rear driveshaft and driving out on the front axle with an auto locker SUCKS.
 
If you got hubs and want to save a ton of cash, you can weld the front spider and side gears. This esentially makes a spool. Lots of info in the tech section.
 
i love turning withthe wheels alllocked up, makes thing interesting
 
Back
Top Bottom