ARCHIVE LANDTANK GEN-IV MAF is finally ready

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Cruzilla said:
The 2.8 is the Holy Grail as far as performance with my 7K lb beast. It moved the boost sooner in the throttle range and increased torque sooner as well. I also hear the SC under load now and really had to listen for it with the 3.25 and 3.0 pulleys.
I am seeing 7 lbs boost on my gauge (not 8) as the WAIC core is restricting 1 lb of boost. But 7 lbs of cooled air is way better than 8 lbs heated by the SC!
IF the numbers can be believed I should be seeing 300 HP at this point and 380 Flbs of torque.
Click to expand...
That's great to hear. Not good for my temptations though :)

Found you here What Did You Do with Your 80 This Weekend?

So it has IC?
Do you have thread on IC - I started search but didn't see anything yet?
 
No, never did a thread on it. I bought most of it as a kit and then designed my own heat exchanger system.

20190401_195919.jpg


20190401_200128.jpg
 
Qball said:
What @NLXTACY said, when my 80 was at stock weight I saw a .5 mpg increase, not huge or would pay for the MAF but that’s what I saw. Also the “snappier” throttle response is actually quite noticeable.
Click to expand...
I belive I'm looking at similar improvement on mpg now with the MAF iv now in s/c '96 - several road trips done and I'm easily getting past 300 trip miles between refills when usually never went past 270-280 per tank.
 
Anyone been able to get a hold of one of these MAFs from Wits' End (@NLXTACY) lately?

I ordered one on Nov. 30th (saw the Instagram post saying that item might not ship for at least a week) and then got a "shipped" tracking number on Dec. 4th that just shows that "the package is on its way to USPS facility". I emailed Wits' End Dec. 17th and got no response, I later realized they might be having problems with their email, so I sent them a DM on Instagram. Got a response and was told they'd check with the fabricator since the MAFs were supposed to be ready and shipped to me. Never heard back, so messaged them again on the 20th and haven't gotten a response since. I understand the holidays are a busy time, but just trying to figure out what is going on.
 
The air straighteners are in as well as the sensors. There was a problem at the shop with his CNC lathe but I believe that has been worked out and I expect the housing to shipped shortly. There are a few orders already in and they will ship as soon as the housings are ready.
 
landtank said:
The air straighteners are in as well as the sensors. There was a problem at the shop with his CNC lathe but I believe that has been worked out and I expect the housing to shipped shortly. There are a few orders already in and they will ship as soon as the housings are ready.
Click to expand...

Understood, thanks for the update.
 
landtank said:
The air straighteners are in as well as the sensors. There was a problem at the shop with his CNC lathe but I believe that has been worked out and I expect the housing to shipped shortly. There are a few orders already in and they will ship as soon as the housings are ready.
Click to expand...
Hey Rick, Any updated ship date for previously placed orders? Thanks!
 
The housings are going to be going to the plater on Monday. The actual released kits will include new Denso injectors and the price will reflect that. I’ll work up a price as soon as I get a chance.

there will only be 10 kits available this run so let Joey know if you are interested in one.
 
landtank said:
The housings are going to be going to the plater on Monday. The actual released kits will include new Denso injectors and the price will reflect that. I’ll work up a price as soon as I get a chance.

there will only be 10 kits available this run so let Joey know if you are interested in one.
Click to expand...
Will these work for Joey turbo kit?
 
landtank said:
The housings are going to be going to the plater on Monday. The actual released kits will include new Denso injectors and the price will reflect that. I’ll work up a price as soon as I get a chance.

there will only be 10 kits available this run so let Joey know if you are interested in one.
Click to expand...
Joey, just PM’d you for one.
landtank thanks for putting these together.
 
landtank said:
The housings are going to be going to the plater on Monday. The actual released kits will include new Denso injectors and the price will reflect that. I’ll work up a price as soon as I get a chance.

there will only be 10 kits available this run so let Joey know if you are interested in one.
Click to expand...

Is there any update?
 
landtank said:
The housings are waiting for me to pick up. Orders should ship this weekend
Click to expand...

Great, looking forward to finally getting it installed on my 80.

Mjones said:
Orders?
As in it'll go to Wits' End first and posted there for ordering?
Click to expand...

I believe he is referring to customers that had already previously placed an order for one.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom