Land Cruiser Newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 14, 2016
Threads
8
Messages
56
Location
Manassas, VA, United States
Hello Everyone!

I'm new to this Land Cruiser ownership thing but I always wanted one. growing up in Venezuela I must say might have had an effect on the love I have for these trucks. after my divorce I was able to pick one up for a fairly decent price at a really good condition. 1997 FZJ80 one owner, factory locked no accidents and very well kept. small little details but overall a really clean rig. She's my daily driver and I was gonna use it to tow my 2011 Mustang GT to the racetrack but due to unforeseen conditions I was forced to sell my fast car leaving me with an awesome truck to build yet she's soooo slow ( which I already knew but after daily driving a low 11 second car every day anything is really slow ) anyways there are some things I don't know about her and I would appreciate some input.

-I don't think my Lockers work because the lights on the dash blink whenever I turn the knob to engage them. what kind of repairs am I looking at? expensive?
-what can I do to squeeze a little bit of more power out of this thing? header, catback, etc?
-anyone makes some sort of ECU piggyback programmer, a hand held tuner etc for these trucks?
thank you for your input
 
Congrats and welcome.

Sorry the mustang is no more but now you have more funds to build up the LC which wasnt gonna be a killer tow tig anyways.

1). Did you shift into low range first?
Rhe lockers wont lock unless the center diff is locked. This can happen by a couple means. A) shift to low and center is aoutomatically engaged. You should have CDL and ABS lights on at thisnpoint and diffs should then activate. B) one could do the pin 7 mod to allow manually locking center diff but im guessing as a one non enthusiest owner that his has been done. It would be a button in dash in upper left of HVAC surrounds. Either a cdl icon or a second hazard switch.

2) i dint think youll find much in the way of power here from small ancillaries. Turbo and supercharger are possible but by no means budget options. Keep the weight down and learn the power curve. It wont be a rocket but it will be reliable.

3)short answer no. Dont fall for the unichip as it does nothing really. Now there are piggybacks and standalone evus that come into play when installing power adders above to help keep fueling right as the ecu is only good for keeping up with about 5psi in stock form... Still with some limitations.


Back to 1). If you were in low and cdl was locked then it may take some time excersizing a set of unused lickers to get them functioning correctly. Spend some time in a gravel/dirt lot doing some figure 8s as you engage and disengage lockers trying to free up the mechanism. Most folks eventually have luck with this but if not fear not.... There are great threads discussing testing and rebuilding.


Lots of info here

FAQ for 80/LX450 -Mar 2015 -Added Battery Information Thread

And if you still feel the need for 200hp/cylinder then you need to start saving and read here

80 series where to start! Again....

If 500hp is enough Ryan has a thread for that too in his sigline :D
 
Welcome to the fun and info place for Land Cruisers.

For a quick overview of locker diagnosis, try: CDL Actuator Fun
Another possibility hash: Repairing Differential E-Lockers
But search will turn up more...likely nothing too complex, just needs some analysis to find the issue.

[jfz80's suggestion they may simply need some "exercise" is a good place to start, BTW]

More power? = Supercharger (Toyota option originally, now aftermarket or NOS parts)

Sorry, no easy way to chip the 1FZ. There are ways to hack, but nothing neat and easy.
 
Congrats and welcome.

Sorry the mustang is no more but now you have more funds to build up the LC which wasnt gonna be a killer tow tig anyways.

1). Did you shift into low range first?
Rhe lockers wont lock unless the center diff is locked. This can happen by a couple means. A) shift to low and center is aoutomatically engaged. You should have CDL and ABS lights on at thisnpoint and diffs should then activate. B) one could do the pin 7 mod to allow manually locking center diff but im guessing as a one non enthusiest owner that his has been done. It would be a button in dash in upper left of HVAC surrounds. Either a cdl icon or a second hazard switch.

2) i dint think youll find much in the way of power here from small ancillaries. Turbo and supercharger are possible but by no means budget options. Keep the weight down and learn the power curve. It wont be a rocket but it will be reliable.

3)short answer no. Dont fall for the unichip as it does nothing really. Now there are piggybacks and standalone evus that come into play when installing power adders above to help keep fueling right as the ecu is only good for keeping up with about 5psi in stock form... Still with some limitations.


Back to 1). If you were in low and cdl was locked then it may take some time excersizing a set of unused lickers to get them functioning correctly. Spend some time in a gravel/dirt lot doing some figure 8s as you engage and disengage lockers trying to free up the mechanism. Most folks eventually have luck with this but if not fear not.... There are great threads discussing testing and rebuilding.


Lots of info here

FAQ for 80/LX450 -Mar 2015 -Added Battery Information Thread

And if you still feel the need for 200hp/cylinder then you need to start saving and read here

80 series where to start! Again....

If 500hp is enough Ryan has a thread for that too in his sigline :D

Thank you so much for the reply Jfz80. I will definitely look into that. I love this truck and can't wait to start playing with it. there are TONS of lifted pick up trucks and mall crawler jeeps around here and I wanna be different so why not roll in a Legend like the Land Cruiser? I like cars with Heritage and that's why I had a Mustang ( actually I owned 5 ) but if funds permit and after playing with this truck I plan on also getting Either a Shelby GT500 or pull the trigger for a MKIV Supra. we'll see but for now My cruiser is my project and she's gonna stay with me hopefully forever.
 
Welcome to the fun and info place for Land Cruisers.

For a quick overview of locker diagnosis, try: CDL Actuator Fun
Another possibility hash: Repairing Differential E-Lockers
But search will turn up more...likely nothing too complex, just needs some analysis to find the issue.

[jfz80's suggestion they may simply need some "exercise" is a good place to start, BTW]

More power? = Supercharger (Toyota option originally, now aftermarket or NOS parts)

Sorry, no easy way to chip the 1FZ. There are ways to hack, but nothing neat and easy.

Thank you Greentruck. I will definitely try and "exercise" my lockers lol
 
Take your cruiser stock to the trails. You'll be amazed at what it could do. I was running circles around rubicon's. Even pulling a few out. Make sure you're in low before trying the lockers. Once in low and the lockers are turned on you may have to move back and forth befor the lockers engage. My front isn't working. I haven't had time to mess with it and the rear sometimes takes a minute or so before engaging.
 
I've never been to Venezuela, but spent plenty of time in Panama at our Jungle Warfare Center. Beautiful country! I would LOVE to do a Venezuela "overland" trip!
Anyways.... regarding your lockers, I have read if quiet a few people that had the same issue your stating. "The vehicle was never wheeled", "soccer mom owned", etc, etc.
What a lot of the new owners ending up doing was a simple diff fluid change. Putting new fluids should be a priority anyways.... so hopefully that, along with FZJ80's advice will get you fully locked again! Seems the Cruisers (heck ALL 4wd systems) "need" to be exercised regularly.
As far as power goes............. good flipping luck! Other than heart transplant or supercharger/turbo install there's not much to be had. (Nice 5.0 swap would be sweet in a Cruiser!) Good luck to you in whatever direction you choose! And, I'm sure your already aware......but.....welcome to the addiction!
 
Welcome, and a mud salute!:flipoff2: As far as the power adders go, there isn't much until you go to basically one of three levels. #1 supercharger (get it quick, they are about to be NLA, check with @2fpower for one)- pretty good but you hit a wall for power potential. #2 Turbo -very good but you will have to do some legwork yourself (check threads by @scottryana , and turbo thread by @Heckraiser ). #3 V8 conversion- very good but lots of legwork and money (new thread in FAQ)

lots of search topics, lot to read. Good luck!

Pictures please!
 
Grats... 1st thing to get is 7W LED reverse lights... stock is terribly dim.
 
I pieced together my turbo setup for somewhere around $2300, that's probably the best bang/$ power adder, but since there is no good way to tune the factory ECU, just keep your expectations in line with reality. Add stand alone ecu and a smaller turbo, and you'd be looking at some real fun :)

Magnuson supercharger is a relatively simple bolt-on operation and many people have been running these for hundreds of thousands of miles. Buy it now and keep it in the shed if you are on the fence. They are almost gone and will probably get expensive quick.

Stock headers and exhaust are pretty well designed straight from toyota. An upgrade would not be worth the cost, IMO.

@jfz80 hit the nail on the head with the lockers. They need to be exercised periodically.
 
I've never been to Venezuela, but spent plenty of time in Panama at our Jungle Warfare Center. Beautiful country! I would LOVE to do a Venezuela "overland" trip!
Anyways.... regarding your lockers, I have read if quiet a few people that had the same issue your stating. "The vehicle was never wheeled", "soccer mom owned", etc, etc.
What a lot of the new owners ending up doing was a simple diff fluid change. Putting new fluids should be a priority anyways.... so hopefully that, along with FZJ80's advice will get you fully locked again! Seems the Cruisers (heck ALL 4wd systems) "need" to be exercised regularly.
As far as power goes............. good flipping luck! Other than heart transplant or supercharger/turbo install there's not much to be had. (Nice 5.0 swap would be sweet in a Cruiser!) Good luck to you in whatever direction you choose! And, I'm sure your already aware......but.....welcome to the addiction!

Thank you Marine7. yeah I've some some maintenance to it already. changed the front, rear fluids on the differentials, also my transfer case fluid. replaced the rear calipers, pads and rotors as well as the brake fluid. next thing will be the trans fluid, p/s fluid and coolant flush. just routine maintenance. previous owner did plugs, cap & rotor, wires. so far all I've done is window tint ( 15% all around, so she's dark lol) and converted all my interior lights to LEDs, as well as my low beam headlights, parking lights and tag lights. did a new Head unit with Bluetooth, changed the side marker lenses to LX450 clear/amber ones ( not a big fan of the amber ones the truck came with ) and replaced my grille with a 94 grille and painted the chrome accents black ( it fits with some minor mods )
 
Welcome, and a mud salute!:flipoff2: As far as the power adders go, there isn't much until you go to basically one of three levels. #1 supercharger (get it quick, they are about to be NLA, check with @2fpower for one)- pretty good but you hit a wall for power potential. #2 Turbo -very good but you will have to do some legwork yourself (check threads by @scottryana , and turbo thread by @Heckraiser ). #3 V8 conversion- very good but lots of legwork and money (new thread in FAQ)

lots of search topics, lot to read. Good luck!

Pictures please!

that's in my plans lol. any idea where I can find a kit?
 
supercharger- @2fpower sells them (magnusson supercharger). Turbo is kind of a piece together, CX racing sells a kit and Cruiserparts sells the same (rebranded), but they are China parts and turbo, better off piecing one with better parts. Try this thread for diy info.
https://forum.ih8mud.com/posts/10247457/
 
Here is a shortcut to my shopping list from the above thread. If you read through the thread, you will find a bunch of things that could have been done differently/better and hopefully pick up some ideas to streamline the project.

Shopping list
 
Only a few left.
 
As for the supercharger kit any idea on the tune/calibration needed? fuel injectors anything like that? I know for my mustang I needed new injectors, fuel pump (or at least a boost-a-pump) and a tune to even make it run. is it the same with these trucks?
 
Neither the SC or a basic turbo setup like mine need any fuel or engine management mods to work. The stock computer and fuel system is all that is required. Although if you want to squeeze more performance out of the setup, there are upgrades that can be made.
 
Neither the SC or a basic turbo setup like mine need any fuel or engine management mods to work. The stock computer and fuel system is all that is required. Although if you want to squeeze more performance out of the setup, there are upgrades that can be made.
Fantastic!!! that is great info to have Heckraiser. thanks man! now another question when it comes to exhaust.. header and Catback, worth it? if so which one?
 
On an otherwise stock motor, I don't think its worth it. The toyota exhaust is pretty well thought out, 2.5" the whole way and nice mandrel bends. The stock exhaust manifolds are a 6-2-1 design (two 3-1's and a y-pipe) and also seem to flow quite well for what they are. I personally wouldn't waste any money on it, especially considering that money could be put towards something else that actually yields good power. That's just my $.02 and I'm sure some will disagree with me.
 
Agree with heckraiser but if you keep asking opinions someone will Tell you theirs added 20 hp ;)

I did the 3" over the frame rail but mostly cause i crushed it. Butt dyno said maybe gained a little. Totally not worth the decible exchange rate though. Plus i already had the sc installed

Ive come back to 2.5" since then.

Also a header would likely interfere with SC and would not be used with a turbo so id pass on that one for now.

If you are serious about a SC then i wouldnt delay. 2fpower is your man.
 
Last edited:
Back
Top Bottom