IPOR rear bumper install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

My only concern would be the sides; they don't look like they bolt to the frame in any way. Are they only attached where they meet the bumper? I'd be worried about bending them upwards into the body.

I had the very same question and when I spoke to Lance a week or so ago there is reasoning behind not having wing mounts on every bumper. The vast majority of bumpers sold will go on trucks that do not see hardcore trails where it will be an issue. The rationale is that to maintain a good price point these will be options for those individuals that desire the additional structural integrity. I'll know a little more when I talk to Lance this week.

One other note, the bumper shown is an early prototype and the interior structure has been slightly altered to make it more rigid.
 
I've been looking at these bumpers, more specifically, I've been looking at the tow version of the bumper. Did you look at those before your purchase? They are about $500 more, so I was wondering if they connected directly to the frame or if it was the same bumper you have with just a tow receiver.

Thanks for posting the pics. It is good to see how far the tire is away from the back. It sticks our farther than I expected. Not saying it's bad, just not what I expected. It is definitely a nice looking bumper and I look forward to hearing what you think of it.
 
Uraja,

This new design of the rear bumper is not the same as the one listed on their website. Currently or at least in my last conversation with Lance they do not have a towing version at this time. Your best bet is call and talk to Lance or Cam and they can fill you in.

http://www.ironpigoffroad.com/about/contact.shtml
 
Uraja,

This new design of the rear bumper is not the same as the one listed on their website. Currently or at least in my last conversation with Lance they do not have a towing version at this time. Your best bet is call and talk to Lance or Cam and they can fill you in.

http://www.ironpigoffroad.com/about/contact.shtml

Cool....thanks for the info. I'll give them a call. I'm still a month or so away from this purchase, so I'm early in the info gathering process. I was looking at their's mainly because they are about an hour away from me (no shipping costs) and I also wanted to get their skid plate.
 
I like this latch configuration.

As far as keeping it open, I did a carrier on my 40, and I took an old air spring from a topper and used it to hold the carrier open. It's a nice addition, and not hard to do, just have to figure out the mounting locations, it's nice if it goes over-center so it holds the swingout up against the bumper while you're latching it. My carrier also had a huge rack on it, and was heavy. Could have used a more powerfull spring, but that wouldn't be hard to source. My wife's CR-V has a simular set up on the rear door.
latch.webp
 
I picked up ddd113's old IPOR bumper and he added a gas strut to it, really nice for opening and closing. I was impressed with the install. Only time issue was cutting square in cross member for tow receiver.
 
i am a bit worried about the rear tire being so far awat from the body... i am going to call Lance on the suggestion of some other members. can anyone think of why the tire might be so far from the rear hatch?
 
Peepers,

How is your tire carrier as far as rigidity is concerned? I was a little concerned with my heavy tire/wheel combo. I know that this is a pretty well proven design, but I was just a little nervious seeing the tire carrier flex when bounced. I am sure that just about anything will flex when you place a large weight on a 2'-3' arm. I just wanted to see how other owners felt.

Ryan.
 
i am a bit worried about the rear tire being so far awat from the body... i am going to call Lance on the suggestion of some other members. can anyone think of why the tire might be so far from the rear hatch?

I think Lance put the space there to prevent dammage if you backed into something. There is a thread where someone backed into a tree and there tire carrier busted their window and damaged the hatch.

see https://forum.ih8mud.com/showthread.php?t=110875&highlight=tire+carrier+damage


here is mine
tirecarrier.webp
 
Last edited:
I picked up ddd113's old IPOR bumper and he added a gas strut to it, really nice for opening and closing. I was impressed with the install. Only time issue was cutting square in cross member for tow receiver.

I could be TOTALLY off here, but I believe Urban picked up a few of the bumpers that had roller bearing spindles and now the bumpers come with oil impregnated bushings. The bushings I think :confused: prevent it from swinging wildly while open... no "lock while open" needed.
 
Peepers,

How is your tire carrier as far as rigidity is concerned? I was a little concerned with my heavy tire/wheel combo. I know that this is a pretty well proven design, but I was just a little nervious seeing the tire carrier flex when bounced. I am sure that just about anything will flex when you place a large weight on a 2'-3' arm. I just wanted to see how other owners felt.

Ryan.

What is your tire/wheel combo? For street use I have a 33x10.50 BFG AT on there and a 36x12.50 TSL/SX when I go in the woods. The arm handles the Swamper with no complaints. Both tires move slightly, but that's to be expected.
 
Cool....thanks for the info. I'll give them a call. I'm still a month or so away from this purchase, so I'm early in the info gathering process. I was looking at their's mainly because they are about an hour away from me (no shipping costs) and I also wanted to get their skid plate.

I took the towball and plate off my 1976 FJ55 and bolted it to the IPOR bumper on my 80. The 4 bolt holes in the middle that hold both stock and IPOR bumpers to the rear frame crossmember are exactly the same. I can send you pics if you want. The towball and plate look like an aftermarket purchase.
 
What is your tire/wheel combo? For street use I have a 33x10.50 BFG AT on there and a 36x12.50 TSL/SX when I go in the woods. The arm handles the Swamper with no complaints. Both tires move slightly, but that's to be expected.

its a 35" toyo MT on a stock Rim. do you have the same tire carrier? IE does it stick out that far?

how long have you had it on there? is there any sign of wear on the spindle?

[edit] pics of the big tire up there?
 
Last edited:
Back
Top Bottom