I keep bustin stuff! Help!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2006
Threads
30
Messages
173
Location
Nebraska
OK, I realize I don't have Dana 60's, but I broke an outer/Birfield at Moab, which was actually an old Marfield UM4, then at a local off road park in Kansas, I snapped my rear pinion right at the housing! I think my throttle return spring is too light for one thing. I get to bouncing up ledges and over rocks and I get all jerky on the throttle. Maybe I need a hand throttle? Lower gears? 1st gear is what breaks s***. I think the SM465 granny low and the 4.11 gears with 35" tires are a bad combo. That might explain the pinion breaking but not the Birfield. What gives??

Thanks
Tom

ps, anyone got a used 4.11 diff for sale???
 
thsorens said:
I get to bouncing up ledges and over rocks and I get all jerky on the throttle. QUOTE]

I think that is the key - you've got all kinds of force multipliers being factored in at that point. Sounds like you're doing some hard core wheeling there - or you're a speed demon on the rocks.
 
I try to take it easy, but my tires don't seem to grab too well, so then I hit the throttle a little and stuff gets to bouncing, and Voila! Snap bang crack! I have some off brand 35" mudders that have good tread, and I have been airing them down to 10-15 psi, but they really don't grab worth a s*** on the rocks. Plus, the throttle spring is pretty light and this 327 has some nuts! It really surprises me even on the street! Also, my turbo mufflers are mounted in a bad place vertically right in front of the rear axle, and I think they get caught before the tires grab. I got issues man!! I guess I need to drop some more $$$$$
 
Deeper gears could help out, like 4:88's Pluss it forces you to put in fine spline pinion!! that gets rid of one issue!

For the Birfs you may want to either upgrade to longfields, or conisder pullin the aussie till you can afford it.. I broke one birf with an open front, and since i have decided not to lock it till i can do the Whole thing right with the 30 spline cromoly kit

unfortunatly tossing money at this one may solve your problemb..

or just ease up on the throttle a bit, and give up before somthing in the driveline decides to :)


on a side note, how do you like the Aussies F/R??
 
The Aussies front and rear work flawlessly. As you can see, they will break birfs and pinions and not themselves! I thought for sure after the pinion snapped that my locker would be toast, but I took it apart (to get it to the trailer) and it was completely in tact. I think you might be right about taking the front one out though. I know I can beef up the drivetrain, and need to, with the full front chrome moly and maybe a Dana 60 in the rear, but I think I need to get some softer tires and tighten the throttle spring up too. Maybe even a hand throttle. Even when I make sucessful passes up ledges, I'm bouncin pretty good. I have a Samurai with 5.12's stock engine stock transfer case and lockers front and rear, with stock axles and have never broken anything. Granted it probably doesn't have enough power to break anything, but the axles in that thing are only 1"!! Seems like you could snap them over your knee!
 
So you are spring over....


Lets see some pics of this truck, and the rear axle anti-wrap bar....


A Dana 60/70/80/14 bolt/9" or??? will all snap a pinion when the drive shaft binds up because of axle wrap.


I have hopped my Land Cruiser with a SU/toy6/420/4.11 set up A LOT and have yet to bust a Land Cruiser pinion.
 
I am bettin no wrap bar..
 
Poser you are such a smart ass!
blush, :rolleyes: no axle wrap bar..........
You think its that simple huh? OK, first I need to find a 4.11 diff, then I'll start workin on an anti wrap bar! Damit I hate it when you guys point out the obvious! Some guy has a 4.11 front course spline on Ebay for like $200. The fronts and rears are the same right? Is that fair? sounded a little high to me. I can get a diff out of a 60 also right?
 
thsorens said:
Poser you are such a smart ass!


Better than the alterative....


thsorens said:
no axle wrap bar..........You think its that simple huh?

Yes, it really is that simple.

If you are spring over, and are not using an anti spring wrap bar, you will brake pinions all day long, period.


thsorens said:
Some guy has a 4.11 front course spline on Ebay for like $200. The fronts and rears are the same right? Is that fair? sounded a little high to me. I can get a diff out of a 60 also right?

Seems a bit spendy for me...

60 Series diffs will be 3.73 and not 4.11.


A lot is made about the strength differences between a fine and coarse spline pinion. I have seen a pile of both fail in many applications. The cause? A missing, non-functional, or poorly designed anti wrap bar.


:beer:
 
Thanks Poser!
 
Back
Top Bottom